A4012 Purolite C-100H Cation Exchange Demineralization Resin, 1 Cubic Foot, 52 Pound Bag
Purolite C-100H Technical Details
| Model Number | A4012 |
| Resin Type | Strong Acid Cation Exchange |
| Matrix | Gel-type Polystyrene |
| Ionic Form | Hydrogen (H+) |
| Mesh Size | 16 x 50 |
| Volume | 1 Cubic Foot |
| Weight | 52 Pounds |
| Application | Demineralization Systems |
How to Load and Activate C-100H Resin
- Fill your resin tank approximately one-third full with deionized or distilled water before adding resin to prevent air pockets and ensure proper settlement
- Slowly pour the Purolite C-100H resin into the tank, allowing it to settle evenly while maintaining water coverage to avoid resin damage from dry loading
- Backwash the resin bed at 6-8 GPM per square foot of bed area for 10-15 minutes to remove fines and properly classify the bed before placing into service
- Regenerate with sulfuric or hydrochloric acid solution according to your system's regeneration protocol, typically 4-6% acid concentration at slow flow rates
- Rinse thoroughly with deionized water until effluent pH stabilizes and conductivity drops below target levels before returning to production mode
System Requirements
The Purolite C-100H resin is designed for use in mixed bed deionization systems, two-bed demineralizers, and condensate polishing applications where it pairs with strong base anion resins. It performs optimally in water treatment vessels with proper underbedding, distribution systems, and regeneration capabilities. This resin is compatible with standard acid regeneration equipment and works across a wide pH range in hydrogen form applications.
Purolite C-100H Technical Details
| Model Number | A4012 |
| Resin Type | Strong Acid Cation Exchange |
| Matrix | Gel-type Polystyrene |
| Ionic Form | Hydrogen (H+) |
| Mesh Size | 16 x 50 |
| Volume | 1 Cubic Foot |
| Weight | 52 Pounds |
| Application | Demineralization Systems |
How to Load and Activate C-100H Resin
- Fill your resin tank approximately one-third full with deionized or distilled water before adding resin to prevent air pockets and ensure proper settlement
- Slowly pour the Purolite C-100H resin into the tank, allowing it to settle evenly while maintaining water coverage to avoid resin damage from dry loading
- Backwash the resin bed at 6-8 GPM per square foot of bed area for 10-15 minutes to remove fines and properly classify the bed before placing into service
- Regenerate with sulfuric or hydrochloric acid solution according to your system's regeneration protocol, typically 4-6% acid concentration at slow flow rates
- Rinse thoroughly with deionized water until effluent pH stabilizes and conductivity drops below target levels before returning to production mode
System Requirements
The Purolite C-100H resin is designed for use in mixed bed deionization systems, two-bed demineralizers, and condensate polishing applications where it pairs with strong base anion resins. It performs optimally in water treatment vessels with proper underbedding, distribution systems, and regeneration capabilities. This resin is compatible with standard acid regeneration equipment and works across a wide pH range in hydrogen form applications.
Original: $409.99
-65%$409.99
$143.50Description
Purolite C-100H Technical Details
| Model Number | A4012 |
| Resin Type | Strong Acid Cation Exchange |
| Matrix | Gel-type Polystyrene |
| Ionic Form | Hydrogen (H+) |
| Mesh Size | 16 x 50 |
| Volume | 1 Cubic Foot |
| Weight | 52 Pounds |
| Application | Demineralization Systems |
How to Load and Activate C-100H Resin
- Fill your resin tank approximately one-third full with deionized or distilled water before adding resin to prevent air pockets and ensure proper settlement
- Slowly pour the Purolite C-100H resin into the tank, allowing it to settle evenly while maintaining water coverage to avoid resin damage from dry loading
- Backwash the resin bed at 6-8 GPM per square foot of bed area for 10-15 minutes to remove fines and properly classify the bed before placing into service
- Regenerate with sulfuric or hydrochloric acid solution according to your system's regeneration protocol, typically 4-6% acid concentration at slow flow rates
- Rinse thoroughly with deionized water until effluent pH stabilizes and conductivity drops below target levels before returning to production mode
System Requirements
The Purolite C-100H resin is designed for use in mixed bed deionization systems, two-bed demineralizers, and condensate polishing applications where it pairs with strong base anion resins. It performs optimally in water treatment vessels with proper underbedding, distribution systems, and regeneration capabilities. This resin is compatible with standard acid regeneration equipment and works across a wide pH range in hydrogen form applications.
