HomeStore

Autotrol (1000215) #14 - Backwash Assembly 5.3 GPM

Product image 1
1 / 2

Autotrol (1000215) #14 - Backwash Assembly 5.3 GPM

The Autotrol 1000215 Backwash Assembly #14 is a precision-engineered internal drain flow control designed for 5.3 GPM backwash applications in Autotrol control valve systems. This OEM component ensures consistent, reliable backwash cycles for optimal water treatment performance.
SPECIFICATIONS

Technical Details

Part Number Autotrol 1000215
Assembly Type #14 Backwash Assembly
Flow Rate 5.3 GPM
Function Internal Backwash Drain Flow Control
Category Control Valve Accessory
Manufacturer Autotrol
Application Water Softeners, Filtration Systems
INSTALLATION & USE

Replacement Procedure

  1. Depressurize the system and disconnect power to the control valve before beginning service work
  2. Remove the existing backwash assembly from the control valve body, noting orientation and seating position
  3. Install the Autotrol 1000215 assembly into the valve body, ensuring proper alignment with drain ports and sealing surfaces
  4. Reassemble the control valve housing and restore power, then initiate a manual backwash cycle to verify proper flow and drainage
COMPATIBILITY

System Requirements

This backwash assembly is designed specifically for Autotrol control valves requiring a 5.3 GPM internal drain flow control. Verify your existing assembly number and flow rate requirements before ordering. The 1000215 is an OEM replacement part that maintains original equipment specifications for backwash duration and regeneration cycles in residential and light commercial water treatment systems.

🔧 When replacing backwash assemblies, inspect all adjacent seals and o-rings for wear or compression set. Replacing these inexpensive components during valve service prevents callbacks and ensures long-term seal integrity.
The Autotrol 1000215 Backwash Assembly #14 is a precision-engineered internal drain flow control designed for 5.3 GPM backwash applications in Autotrol control valve systems. This OEM component ensures consistent, reliable backwash cycles for optimal water treatment performance.
SPECIFICATIONS

Technical Details

Part Number Autotrol 1000215
Assembly Type #14 Backwash Assembly
Flow Rate 5.3 GPM
Function Internal Backwash Drain Flow Control
Category Control Valve Accessory
Manufacturer Autotrol
Application Water Softeners, Filtration Systems
INSTALLATION & USE

Replacement Procedure

  1. Depressurize the system and disconnect power to the control valve before beginning service work
  2. Remove the existing backwash assembly from the control valve body, noting orientation and seating position
  3. Install the Autotrol 1000215 assembly into the valve body, ensuring proper alignment with drain ports and sealing surfaces
  4. Reassemble the control valve housing and restore power, then initiate a manual backwash cycle to verify proper flow and drainage
COMPATIBILITY

System Requirements

This backwash assembly is designed specifically for Autotrol control valves requiring a 5.3 GPM internal drain flow control. Verify your existing assembly number and flow rate requirements before ordering. The 1000215 is an OEM replacement part that maintains original equipment specifications for backwash duration and regeneration cycles in residential and light commercial water treatment systems.

🔧 When replacing backwash assemblies, inspect all adjacent seals and o-rings for wear or compression set. Replacing these inexpensive components during valve service prevents callbacks and ensures long-term seal integrity.
$5.95

Original: $17.00

-65%
Autotrol (1000215) #14 - Backwash Assembly 5.3 GPM—

$17.00

$5.95

Description

The Autotrol 1000215 Backwash Assembly #14 is a precision-engineered internal drain flow control designed for 5.3 GPM backwash applications in Autotrol control valve systems. This OEM component ensures consistent, reliable backwash cycles for optimal water treatment performance.
SPECIFICATIONS

Technical Details

Part Number Autotrol 1000215
Assembly Type #14 Backwash Assembly
Flow Rate 5.3 GPM
Function Internal Backwash Drain Flow Control
Category Control Valve Accessory
Manufacturer Autotrol
Application Water Softeners, Filtration Systems
INSTALLATION & USE

Replacement Procedure

  1. Depressurize the system and disconnect power to the control valve before beginning service work
  2. Remove the existing backwash assembly from the control valve body, noting orientation and seating position
  3. Install the Autotrol 1000215 assembly into the valve body, ensuring proper alignment with drain ports and sealing surfaces
  4. Reassemble the control valve housing and restore power, then initiate a manual backwash cycle to verify proper flow and drainage
COMPATIBILITY

System Requirements

This backwash assembly is designed specifically for Autotrol control valves requiring a 5.3 GPM internal drain flow control. Verify your existing assembly number and flow rate requirements before ordering. The 1000215 is an OEM replacement part that maintains original equipment specifications for backwash duration and regeneration cycles in residential and light commercial water treatment systems.

🔧 When replacing backwash assemblies, inspect all adjacent seals and o-rings for wear or compression set. Replacing these inexpensive components during valve service prevents callbacks and ensures long-term seal integrity.
Autotrol (1000215) #14 - Backwash Assembly 5.3 GPM | Isopure Water