Autotrol (1030357) 7 GPM External Drain Flow Control
Technical Details
| Model Number | Autotrol 1030357 |
| Flow Rate | 7 GPM (Gallons Per Minute) |
| Drain Type | External Drain Configuration |
| Component Type | Flow Control Restrictor |
| Application | Control Valve Accessory |
| Manufacturer | Autotrol |
| Function | Regulates backwash and rinse discharge |
| Material | Chemical-resistant polymer |
Setup Instructions
- Shut off water supply and depressurize the system before beginning installation.
- Remove the existing flow control from the drain line port on your Autotrol control valve.
- Insert the 1030357 flow control into the external drain port, ensuring a secure friction fit or threaded connection depending on your valve model.
- Connect drain line tubing to the outlet end of the flow control and secure to the drain point.
- Restore water supply and run a manual regeneration cycle to verify proper drain flow and check for leaks.
System Requirements
The Autotrol 1030357 7 GPM external drain flow control is designed for use with Autotrol control valves that require external drain flow regulation during backwash and regeneration cycles. This component is commonly used in water softeners, iron filters, and whole-house filtration systems equipped with Autotrol automatic control valves. Verify your system's required drain flow rate matches the 7 GPM specification before ordering. Not compatible with internal drain valve configurations.
Technical Details
| Model Number | Autotrol 1030357 |
| Flow Rate | 7 GPM (Gallons Per Minute) |
| Drain Type | External Drain Configuration |
| Component Type | Flow Control Restrictor |
| Application | Control Valve Accessory |
| Manufacturer | Autotrol |
| Function | Regulates backwash and rinse discharge |
| Material | Chemical-resistant polymer |
Setup Instructions
- Shut off water supply and depressurize the system before beginning installation.
- Remove the existing flow control from the drain line port on your Autotrol control valve.
- Insert the 1030357 flow control into the external drain port, ensuring a secure friction fit or threaded connection depending on your valve model.
- Connect drain line tubing to the outlet end of the flow control and secure to the drain point.
- Restore water supply and run a manual regeneration cycle to verify proper drain flow and check for leaks.
System Requirements
The Autotrol 1030357 7 GPM external drain flow control is designed for use with Autotrol control valves that require external drain flow regulation during backwash and regeneration cycles. This component is commonly used in water softeners, iron filters, and whole-house filtration systems equipped with Autotrol automatic control valves. Verify your system's required drain flow rate matches the 7 GPM specification before ordering. Not compatible with internal drain valve configurations.
Original: $38.40
-65%$38.40
$13.44Description
Technical Details
| Model Number | Autotrol 1030357 |
| Flow Rate | 7 GPM (Gallons Per Minute) |
| Drain Type | External Drain Configuration |
| Component Type | Flow Control Restrictor |
| Application | Control Valve Accessory |
| Manufacturer | Autotrol |
| Function | Regulates backwash and rinse discharge |
| Material | Chemical-resistant polymer |
Setup Instructions
- Shut off water supply and depressurize the system before beginning installation.
- Remove the existing flow control from the drain line port on your Autotrol control valve.
- Insert the 1030357 flow control into the external drain port, ensuring a secure friction fit or threaded connection depending on your valve model.
- Connect drain line tubing to the outlet end of the flow control and secure to the drain point.
- Restore water supply and run a manual regeneration cycle to verify proper drain flow and check for leaks.
System Requirements
The Autotrol 1030357 7 GPM external drain flow control is designed for use with Autotrol control valves that require external drain flow regulation during backwash and regeneration cycles. This component is commonly used in water softeners, iron filters, and whole-house filtration systems equipped with Autotrol automatic control valves. Verify your system's required drain flow rate matches the 7 GPM specification before ordering. Not compatible with internal drain valve configurations.
