3M (47-55702G2) Cuno Water Factory SQC 5 Micron Sediment Filter
3M 47-55702G2 Cuno Water Factory SQC 5 Micron Sediment Filter
First-stage sediment protection for your RO system
Captures Particulate Matter
5 micron nominal rating removes sand, silt, dirt, and rust before they reach your carbon filters and RO membrane.
Meltblown Construction
Graduated density polypropylene fibers trap larger particles at the surface and finer sediment deeper in the media for greater capacity and longer life.
Quick-Change SQC Design
Proprietary SQC fitting allows tool-free replacement in seconds. Turn, pull, insert, twist—done.
Original Equipment Part
Manufactured by 3M specifically for Cuno Water Factory systems. Not an aftermarket copy—this is the same filter your system shipped with.
Fits Cuno Water Factory SQC Systems
The 3M 47-55702G2 is the OEM sediment prefilter for all Cuno Water Factory reverse osmosis systems using the SQC quick-change cartridge format. If your system has a twist-lock sediment housing in the first stage and originally shipped with a 3M Cuno filter, this is your replacement.
Replacement Schedule
Standard Conditions
Replace the 3M 47-55702G2 sediment filter every six months under typical municipal water conditions with low to moderate sediment.
Heavy Sediment
If your source water has visible cloudiness, rust, or high particulate, inspect monthly and replace when flow drops or pressure builds.
Pressure Drop Indicator
Replace immediately if water flow slows significantly or if you notice sediment bypassing into downstream filters.
Membrane Protection
Removing sediment upstream prevents abrasive damage and premature fouling of your expensive RO membrane.
Consistent Flow
A fresh sediment filter maintains proper pressure and flow rate through all stages of your reverse osmosis system.
Factory Direct Quality
3M manufactures these filters to exact tolerances for Cuno systems. You get the fit, performance, and capacity you paid for.
3M 47-55702G2 Cuno Water Factory SQC 5 Micron Sediment Filter
First-stage sediment protection for your RO system
Captures Particulate Matter
5 micron nominal rating removes sand, silt, dirt, and rust before they reach your carbon filters and RO membrane.
Meltblown Construction
Graduated density polypropylene fibers trap larger particles at the surface and finer sediment deeper in the media for greater capacity and longer life.
Quick-Change SQC Design
Proprietary SQC fitting allows tool-free replacement in seconds. Turn, pull, insert, twist—done.
Original Equipment Part
Manufactured by 3M specifically for Cuno Water Factory systems. Not an aftermarket copy—this is the same filter your system shipped with.
Fits Cuno Water Factory SQC Systems
The 3M 47-55702G2 is the OEM sediment prefilter for all Cuno Water Factory reverse osmosis systems using the SQC quick-change cartridge format. If your system has a twist-lock sediment housing in the first stage and originally shipped with a 3M Cuno filter, this is your replacement.
Replacement Schedule
Standard Conditions
Replace the 3M 47-55702G2 sediment filter every six months under typical municipal water conditions with low to moderate sediment.
Heavy Sediment
If your source water has visible cloudiness, rust, or high particulate, inspect monthly and replace when flow drops or pressure builds.
Pressure Drop Indicator
Replace immediately if water flow slows significantly or if you notice sediment bypassing into downstream filters.
Membrane Protection
Removing sediment upstream prevents abrasive damage and premature fouling of your expensive RO membrane.
Consistent Flow
A fresh sediment filter maintains proper pressure and flow rate through all stages of your reverse osmosis system.
Factory Direct Quality
3M manufactures these filters to exact tolerances for Cuno systems. You get the fit, performance, and capacity you paid for.
Original: $70.08
-65%$70.08
$24.53Description
3M 47-55702G2 Cuno Water Factory SQC 5 Micron Sediment Filter
First-stage sediment protection for your RO system
Captures Particulate Matter
5 micron nominal rating removes sand, silt, dirt, and rust before they reach your carbon filters and RO membrane.
Meltblown Construction
Graduated density polypropylene fibers trap larger particles at the surface and finer sediment deeper in the media for greater capacity and longer life.
Quick-Change SQC Design
Proprietary SQC fitting allows tool-free replacement in seconds. Turn, pull, insert, twist—done.
Original Equipment Part
Manufactured by 3M specifically for Cuno Water Factory systems. Not an aftermarket copy—this is the same filter your system shipped with.
Fits Cuno Water Factory SQC Systems
The 3M 47-55702G2 is the OEM sediment prefilter for all Cuno Water Factory reverse osmosis systems using the SQC quick-change cartridge format. If your system has a twist-lock sediment housing in the first stage and originally shipped with a 3M Cuno filter, this is your replacement.
Replacement Schedule
Standard Conditions
Replace the 3M 47-55702G2 sediment filter every six months under typical municipal water conditions with low to moderate sediment.
Heavy Sediment
If your source water has visible cloudiness, rust, or high particulate, inspect monthly and replace when flow drops or pressure builds.
Pressure Drop Indicator
Replace immediately if water flow slows significantly or if you notice sediment bypassing into downstream filters.
Membrane Protection
Removing sediment upstream prevents abrasive damage and premature fouling of your expensive RO membrane.
Consistent Flow
A fresh sediment filter maintains proper pressure and flow rate through all stages of your reverse osmosis system.
Factory Direct Quality
3M manufactures these filters to exact tolerances for Cuno systems. You get the fit, performance, and capacity you paid for.
