Falcon 1" 1/4"F x 3/4"F x 3/4"T Stainless Steel Water Flex Connectors
Technical Details
| Model Numbers | SWC-114X34X15, SWC-114X34X18, SWC-114X34X24 |
| Port Configuration | 1¼" Female x ¾" Female x ¾" Taper |
| Available Lengths | 15", 18", 24" |
| Material | Stainless Steel |
| Construction | Flexible braided hose with reinforced fittings |
| Application | Water filtration systems, treatment equipment |
| Manufacturer | Falcon |
| Corrosion Resistance | High (suitable for potable water) |
How to Install
- Select the appropriate length connector (15", 18", or 24") based on the distance between your filter housing and supply line.
- Hand-tighten the 1¼" female fitting to the filter housing inlet or outlet, ensuring the rubber washer is properly seated.
- Connect the ¾" female or ¾" taper end to your existing plumbing, using Teflon tape or pipe dope on threaded connections as needed.
- Verify all connections are snug but not over-tightened, then slowly open the water supply and check for leaks.
Works With
These Falcon stainless steel flex connectors are designed for use with standard water filtration housings and treatment equipment that require mixed connection sizes. The 1¼" female end typically connects to larger filter housings, while the ¾" connections interface with standard residential or light commercial plumbing. Compatible with most brands including Pentek, Culligan, and other manufacturers using standard NPT threading. Choose your length based on physical spacing requirements in your installation.
Technical Details
| Model Numbers | SWC-114X34X15, SWC-114X34X18, SWC-114X34X24 |
| Port Configuration | 1¼" Female x ¾" Female x ¾" Taper |
| Available Lengths | 15", 18", 24" |
| Material | Stainless Steel |
| Construction | Flexible braided hose with reinforced fittings |
| Application | Water filtration systems, treatment equipment |
| Manufacturer | Falcon |
| Corrosion Resistance | High (suitable for potable water) |
How to Install
- Select the appropriate length connector (15", 18", or 24") based on the distance between your filter housing and supply line.
- Hand-tighten the 1¼" female fitting to the filter housing inlet or outlet, ensuring the rubber washer is properly seated.
- Connect the ¾" female or ¾" taper end to your existing plumbing, using Teflon tape or pipe dope on threaded connections as needed.
- Verify all connections are snug but not over-tightened, then slowly open the water supply and check for leaks.
Works With
These Falcon stainless steel flex connectors are designed for use with standard water filtration housings and treatment equipment that require mixed connection sizes. The 1¼" female end typically connects to larger filter housings, while the ¾" connections interface with standard residential or light commercial plumbing. Compatible with most brands including Pentek, Culligan, and other manufacturers using standard NPT threading. Choose your length based on physical spacing requirements in your installation.
Original: $19.16
-65%$19.16
$6.71Description
Technical Details
| Model Numbers | SWC-114X34X15, SWC-114X34X18, SWC-114X34X24 |
| Port Configuration | 1¼" Female x ¾" Female x ¾" Taper |
| Available Lengths | 15", 18", 24" |
| Material | Stainless Steel |
| Construction | Flexible braided hose with reinforced fittings |
| Application | Water filtration systems, treatment equipment |
| Manufacturer | Falcon |
| Corrosion Resistance | High (suitable for potable water) |
How to Install
- Select the appropriate length connector (15", 18", or 24") based on the distance between your filter housing and supply line.
- Hand-tighten the 1¼" female fitting to the filter housing inlet or outlet, ensuring the rubber washer is properly seated.
- Connect the ¾" female or ¾" taper end to your existing plumbing, using Teflon tape or pipe dope on threaded connections as needed.
- Verify all connections are snug but not over-tightened, then slowly open the water supply and check for leaks.
Works With
These Falcon stainless steel flex connectors are designed for use with standard water filtration housings and treatment equipment that require mixed connection sizes. The 1¼" female end typically connects to larger filter housings, while the ¾" connections interface with standard residential or light commercial plumbing. Compatible with most brands including Pentek, Culligan, and other manufacturers using standard NPT threading. Choose your length based on physical spacing requirements in your installation.
