Fleck (13030) O-Ring Retainer distributor tube
Technical Details
| Part Number | Fleck 13030 |
| Component Type | O-Ring Retainer |
| Application | Distributor Tube Sealing |
| Material | Chemical-Resistant Polymer |
| Category | Control Valve Parts |
| Manufacturer | Fleck (Pentair) |
| Service Life | 5-10 years typical |
Replacement Procedure
- Depressurize the system and disconnect power to the control valve before disassembly
- Remove the control valve head and carefully extract the distributor tube assembly from the tank
- Slide the new Fleck 13030 O-Ring Retainer onto the distributor tube, ensuring it seats properly in the groove
- Reinstall the distributor tube into the tank, verify the retainer is positioned correctly, and reassemble the valve head
- Run a manual regeneration cycle to check for leaks or bypass issues
System Fit
The Fleck 13030 O-Ring Retainer is designed for use with Fleck control valve systems including 5600, 5800, 7000, 9000, and 9100 series valves. This component works with both water softener and filter applications where a distributor tube assembly is present. Verify your existing retainer part number before ordering to ensure proper fit with your specific Fleck valve model and tank size.
Technical Details
| Part Number | Fleck 13030 |
| Component Type | O-Ring Retainer |
| Application | Distributor Tube Sealing |
| Material | Chemical-Resistant Polymer |
| Category | Control Valve Parts |
| Manufacturer | Fleck (Pentair) |
| Service Life | 5-10 years typical |
Replacement Procedure
- Depressurize the system and disconnect power to the control valve before disassembly
- Remove the control valve head and carefully extract the distributor tube assembly from the tank
- Slide the new Fleck 13030 O-Ring Retainer onto the distributor tube, ensuring it seats properly in the groove
- Reinstall the distributor tube into the tank, verify the retainer is positioned correctly, and reassemble the valve head
- Run a manual regeneration cycle to check for leaks or bypass issues
System Fit
The Fleck 13030 O-Ring Retainer is designed for use with Fleck control valve systems including 5600, 5800, 7000, 9000, and 9100 series valves. This component works with both water softener and filter applications where a distributor tube assembly is present. Verify your existing retainer part number before ordering to ensure proper fit with your specific Fleck valve model and tank size.
Description
Technical Details
| Part Number | Fleck 13030 |
| Component Type | O-Ring Retainer |
| Application | Distributor Tube Sealing |
| Material | Chemical-Resistant Polymer |
| Category | Control Valve Parts |
| Manufacturer | Fleck (Pentair) |
| Service Life | 5-10 years typical |
Replacement Procedure
- Depressurize the system and disconnect power to the control valve before disassembly
- Remove the control valve head and carefully extract the distributor tube assembly from the tank
- Slide the new Fleck 13030 O-Ring Retainer onto the distributor tube, ensuring it seats properly in the groove
- Reinstall the distributor tube into the tank, verify the retainer is positioned correctly, and reassemble the valve head
- Run a manual regeneration cycle to check for leaks or bypass issues
System Fit
The Fleck 13030 O-Ring Retainer is designed for use with Fleck control valve systems including 5600, 5800, 7000, 9000, and 9100 series valves. This component works with both water softener and filter applications where a distributor tube assembly is present. Verify your existing retainer part number before ordering to ensure proper fit with your specific Fleck valve model and tank size.
