Fleck (16944) 24V, 60 Hz, 2 rpm Motor Drive
Technical Details
| Model Number | Fleck 16944 |
| Voltage | 24V AC |
| Frequency | 60 Hz |
| Motor Speed | 2 rpm |
| Application | Control valve automation |
| Component Type | Motor drive assembly |
| Manufacturer | Fleck |
| Use Case | Softener and filter valve regeneration |
Replacement Procedure
- Disconnect power to the control valve and relieve system pressure before beginning work
- Remove the control valve cover and locate the existing motor drive assembly on the cam and timer mechanism
- Disconnect the motor wiring harness and remove mounting hardware securing the old motor drive
- Install the Fleck 16944 motor drive in the same orientation, reconnect wiring, and verify proper seating on drive gears
- Replace the cover, restore power, and initiate a manual regeneration cycle to confirm proper operation
Valve Applications
The Fleck 16944 motor drive is compatible with Fleck 2510, 2510SXT, 5600, 5600SXT, 7000, and 9000 series control valves using 24V power supplies. This motor drive is a direct replacement for worn or failed motor assemblies in time-clock and metered valve heads. Verify your existing motor specifications before ordering, as some older Fleck valves may use 110V motors requiring different replacement parts. This component is designed exclusively for 60 Hz North American electrical systems.
Technical Details
| Model Number | Fleck 16944 |
| Voltage | 24V AC |
| Frequency | 60 Hz |
| Motor Speed | 2 rpm |
| Application | Control valve automation |
| Component Type | Motor drive assembly |
| Manufacturer | Fleck |
| Use Case | Softener and filter valve regeneration |
Replacement Procedure
- Disconnect power to the control valve and relieve system pressure before beginning work
- Remove the control valve cover and locate the existing motor drive assembly on the cam and timer mechanism
- Disconnect the motor wiring harness and remove mounting hardware securing the old motor drive
- Install the Fleck 16944 motor drive in the same orientation, reconnect wiring, and verify proper seating on drive gears
- Replace the cover, restore power, and initiate a manual regeneration cycle to confirm proper operation
Valve Applications
The Fleck 16944 motor drive is compatible with Fleck 2510, 2510SXT, 5600, 5600SXT, 7000, and 9000 series control valves using 24V power supplies. This motor drive is a direct replacement for worn or failed motor assemblies in time-clock and metered valve heads. Verify your existing motor specifications before ordering, as some older Fleck valves may use 110V motors requiring different replacement parts. This component is designed exclusively for 60 Hz North American electrical systems.
Original: $162.16
-65%$162.16
$56.76Description
Technical Details
| Model Number | Fleck 16944 |
| Voltage | 24V AC |
| Frequency | 60 Hz |
| Motor Speed | 2 rpm |
| Application | Control valve automation |
| Component Type | Motor drive assembly |
| Manufacturer | Fleck |
| Use Case | Softener and filter valve regeneration |
Replacement Procedure
- Disconnect power to the control valve and relieve system pressure before beginning work
- Remove the control valve cover and locate the existing motor drive assembly on the cam and timer mechanism
- Disconnect the motor wiring harness and remove mounting hardware securing the old motor drive
- Install the Fleck 16944 motor drive in the same orientation, reconnect wiring, and verify proper seating on drive gears
- Replace the cover, restore power, and initiate a manual regeneration cycle to confirm proper operation
Valve Applications
The Fleck 16944 motor drive is compatible with Fleck 2510, 2510SXT, 5600, 5600SXT, 7000, and 9000 series control valves using 24V power supplies. This motor drive is a direct replacement for worn or failed motor assemblies in time-clock and metered valve heads. Verify your existing motor specifications before ordering, as some older Fleck valves may use 110V motors requiring different replacement parts. This component is designed exclusively for 60 Hz North American electrical systems.
