HomeStore

Fleck (17814) DLFC Flow Washer 6.0 GPM

Product image 1

Fleck (17814) DLFC Flow Washer 6.0 GPM

The Fleck 17814 DLFC Flow Washer regulates drain line flow at 6.0 GPM to optimize backwash and regeneration cycles in your water softener control valve. This precision-engineered component ensures proper system performance and prevents drain line overflow during service cycles.
SPECIFICATIONS

Technical Details

Part Number Fleck 17814
Flow Rate 6.0 GPM (gallons per minute)
Component Type Drain Line Flow Control Washer
Compatibility Fleck control valves with DLFC
Material Durable polymer composite
Function Regulates backwash drain flow
Application Water softener service cycles
Vendor Fleck (Pentair)
INSTALLATION & USE

Replacement Procedure

  1. Unplug the control valve and relieve system pressure by running a manual regeneration cycle or turning off inlet water supply.
  2. Locate the drain line flow control housing on your Fleck valve body and carefully remove the existing flow washer using needle-nose pliers or a small pick tool.
  3. Insert the new Fleck 17814 flow washer into the DLFC port, ensuring it seats completely and evenly within the housing.
  4. Reconnect drain line and restore power, then initiate a regeneration cycle to verify proper flow rate and confirm no leaks at the drain connection.
COMPATIBILITY

System Requirements

The Fleck 17814 flow washer is designed for use in Fleck control valves equipped with drain line flow control (DLFC) functionality. This includes many 5600, 5800, 7000, and 9000 series valves that regulate backwash drain flow during regeneration. The 6.0 GPM rating makes it suitable for residential and light commercial water softeners requiring moderate drain flow restriction. Verify your existing flow washer rating before replacement to ensure proper system operation and adequate backwash performance.

🔧 Pro tip: If your softener is draining too slowly during regeneration or you notice incomplete backwash, you may have the wrong flow washer installed. Check the existing washer rating and system specifications before ordering a replacement—flow rates typically range from 1.5 to 8.0 GPM depending on softener size and resin volume.
The Fleck 17814 DLFC Flow Washer regulates drain line flow at 6.0 GPM to optimize backwash and regeneration cycles in your water softener control valve. This precision-engineered component ensures proper system performance and prevents drain line overflow during service cycles.
SPECIFICATIONS

Technical Details

Part Number Fleck 17814
Flow Rate 6.0 GPM (gallons per minute)
Component Type Drain Line Flow Control Washer
Compatibility Fleck control valves with DLFC
Material Durable polymer composite
Function Regulates backwash drain flow
Application Water softener service cycles
Vendor Fleck (Pentair)
INSTALLATION & USE

Replacement Procedure

  1. Unplug the control valve and relieve system pressure by running a manual regeneration cycle or turning off inlet water supply.
  2. Locate the drain line flow control housing on your Fleck valve body and carefully remove the existing flow washer using needle-nose pliers or a small pick tool.
  3. Insert the new Fleck 17814 flow washer into the DLFC port, ensuring it seats completely and evenly within the housing.
  4. Reconnect drain line and restore power, then initiate a regeneration cycle to verify proper flow rate and confirm no leaks at the drain connection.
COMPATIBILITY

System Requirements

The Fleck 17814 flow washer is designed for use in Fleck control valves equipped with drain line flow control (DLFC) functionality. This includes many 5600, 5800, 7000, and 9000 series valves that regulate backwash drain flow during regeneration. The 6.0 GPM rating makes it suitable for residential and light commercial water softeners requiring moderate drain flow restriction. Verify your existing flow washer rating before replacement to ensure proper system operation and adequate backwash performance.

🔧 Pro tip: If your softener is draining too slowly during regeneration or you notice incomplete backwash, you may have the wrong flow washer installed. Check the existing washer rating and system specifications before ordering a replacement—flow rates typically range from 1.5 to 8.0 GPM depending on softener size and resin volume.
$7.61
Fleck (17814) DLFC Flow Washer 6.0 GPM—
$7.61

Description

The Fleck 17814 DLFC Flow Washer regulates drain line flow at 6.0 GPM to optimize backwash and regeneration cycles in your water softener control valve. This precision-engineered component ensures proper system performance and prevents drain line overflow during service cycles.
SPECIFICATIONS

Technical Details

Part Number Fleck 17814
Flow Rate 6.0 GPM (gallons per minute)
Component Type Drain Line Flow Control Washer
Compatibility Fleck control valves with DLFC
Material Durable polymer composite
Function Regulates backwash drain flow
Application Water softener service cycles
Vendor Fleck (Pentair)
INSTALLATION & USE

Replacement Procedure

  1. Unplug the control valve and relieve system pressure by running a manual regeneration cycle or turning off inlet water supply.
  2. Locate the drain line flow control housing on your Fleck valve body and carefully remove the existing flow washer using needle-nose pliers or a small pick tool.
  3. Insert the new Fleck 17814 flow washer into the DLFC port, ensuring it seats completely and evenly within the housing.
  4. Reconnect drain line and restore power, then initiate a regeneration cycle to verify proper flow rate and confirm no leaks at the drain connection.
COMPATIBILITY

System Requirements

The Fleck 17814 flow washer is designed for use in Fleck control valves equipped with drain line flow control (DLFC) functionality. This includes many 5600, 5800, 7000, and 9000 series valves that regulate backwash drain flow during regeneration. The 6.0 GPM rating makes it suitable for residential and light commercial water softeners requiring moderate drain flow restriction. Verify your existing flow washer rating before replacement to ensure proper system operation and adequate backwash performance.

🔧 Pro tip: If your softener is draining too slowly during regeneration or you notice incomplete backwash, you may have the wrong flow washer installed. Check the existing washer rating and system specifications before ordering a replacement—flow rates typically range from 1.5 to 8.0 GPM depending on softener size and resin volume.
Fleck (17814) DLFC Flow Washer 6.0 GPM | Isopure Water