Fleck (60016-01) 560CD Brine Valve Assembly
Technical Details
| Manufacturer Part Number | 60016-01 |
| Brand | Fleck |
| Component Type | Complete Brine Valve Assembly |
| Assembly Includes | Valve body, piston, seals, and internal components |
| Application | Water softener brine draw and rinse cycles |
| Material Construction | Engineering-grade thermoplastic |
| Service Life | Typical 5-7 years under normal operating conditions |
| Replacement Indicator | Inadequate brine draw, salt bridging, or visible wear |
Replacement Procedure
- Disconnect power to the control valve and relieve system pressure. Remove the existing brine valve assembly from the valve body by unscrewing the retaining collar counterclockwise.
- Inspect the valve seat and interior bore for debris or mineral buildup. Clean thoroughly with a soft brush and rinse with water before installing the new assembly.
- Install the Fleck 60016-01 assembly by threading it clockwise into the valve body until snug. Do not overtighten. Reconnect brine tubing and ensure proper seating.
- Restore power and manually initiate a regeneration cycle. Monitor brine draw timing and verify proper refill after backwash completes.
Fits Fleck Control Valves
The 60016-01 brine valve assembly is designed specifically for Fleck 7000, 5810, and 5812 control valves. These valves are commonly found in Fleck softener systems manufactured from the mid-1990s through current production. Verify your control valve model number stamped on the valve body before ordering. This assembly is not compatible with earlier Fleck 5600 or 9000 series valves, which use different brine valve configurations.
Technical Details
| Manufacturer Part Number | 60016-01 |
| Brand | Fleck |
| Component Type | Complete Brine Valve Assembly |
| Assembly Includes | Valve body, piston, seals, and internal components |
| Application | Water softener brine draw and rinse cycles |
| Material Construction | Engineering-grade thermoplastic |
| Service Life | Typical 5-7 years under normal operating conditions |
| Replacement Indicator | Inadequate brine draw, salt bridging, or visible wear |
Replacement Procedure
- Disconnect power to the control valve and relieve system pressure. Remove the existing brine valve assembly from the valve body by unscrewing the retaining collar counterclockwise.
- Inspect the valve seat and interior bore for debris or mineral buildup. Clean thoroughly with a soft brush and rinse with water before installing the new assembly.
- Install the Fleck 60016-01 assembly by threading it clockwise into the valve body until snug. Do not overtighten. Reconnect brine tubing and ensure proper seating.
- Restore power and manually initiate a regeneration cycle. Monitor brine draw timing and verify proper refill after backwash completes.
Fits Fleck Control Valves
The 60016-01 brine valve assembly is designed specifically for Fleck 7000, 5810, and 5812 control valves. These valves are commonly found in Fleck softener systems manufactured from the mid-1990s through current production. Verify your control valve model number stamped on the valve body before ordering. This assembly is not compatible with earlier Fleck 5600 or 9000 series valves, which use different brine valve configurations.
Original: $39.37
-65%$39.37
$13.78Description
Technical Details
| Manufacturer Part Number | 60016-01 |
| Brand | Fleck |
| Component Type | Complete Brine Valve Assembly |
| Assembly Includes | Valve body, piston, seals, and internal components |
| Application | Water softener brine draw and rinse cycles |
| Material Construction | Engineering-grade thermoplastic |
| Service Life | Typical 5-7 years under normal operating conditions |
| Replacement Indicator | Inadequate brine draw, salt bridging, or visible wear |
Replacement Procedure
- Disconnect power to the control valve and relieve system pressure. Remove the existing brine valve assembly from the valve body by unscrewing the retaining collar counterclockwise.
- Inspect the valve seat and interior bore for debris or mineral buildup. Clean thoroughly with a soft brush and rinse with water before installing the new assembly.
- Install the Fleck 60016-01 assembly by threading it clockwise into the valve body until snug. Do not overtighten. Reconnect brine tubing and ensure proper seating.
- Restore power and manually initiate a regeneration cycle. Monitor brine draw timing and verify proper refill after backwash completes.
Fits Fleck Control Valves
The 60016-01 brine valve assembly is designed specifically for Fleck 7000, 5810, and 5812 control valves. These valves are commonly found in Fleck softener systems manufactured from the mid-1990s through current production. Verify your control valve model number stamped on the valve body before ordering. This assembly is not compatible with earlier Fleck 5600 or 9000 series valves, which use different brine valve configurations.
