Fleck (60102-00) 5600 Piston Assembly ; STD
Fleck 5600 Piston Assembly Technical Details
| Manufacturer | Fleck (Pentair) |
| Part Number | 60102-00 |
| Valve Model | 5600 Standard (STD) |
| Assembly Type | Complete piston with seals and spacers |
| Material | Reinforced composite with Buna-N seals |
| Operating Pressure | 25-125 PSI |
| Temperature Range | 34-120°F |
| Service Life | 5-7 years (typical residential use) |
Piston Replacement Procedure
- Bypass water supply, depressurize system, and disconnect valve from power source
- Remove valve cover and drain assembly, then extract the old piston by lifting straight up from the valve body
- Clean valve body ports thoroughly, inspect for wear or debris, and lubricate new piston seals with silicone grease
- Install new 60102-00 piston assembly by aligning guide tabs and pressing firmly until seated, ensuring all seals are properly positioned
- Reassemble drain line and cover, restore power, and manually initiate a regeneration cycle to verify proper operation
Valve System Compatibility
The Fleck 60102-00 standard piston assembly is designed exclusively for 5600 series control valves manufactured by Pentair/Fleck. This assembly fits all standard 5600 configurations including mechanical meter, electronic meter, and time clock models. Not compatible with 5600 SXT models (which require part number 60125-00). Verify your valve model before ordering, as installing the incorrect piston assembly will result in improper valve cycling and potential system damage.
Fleck 5600 Piston Assembly Technical Details
| Manufacturer | Fleck (Pentair) |
| Part Number | 60102-00 |
| Valve Model | 5600 Standard (STD) |
| Assembly Type | Complete piston with seals and spacers |
| Material | Reinforced composite with Buna-N seals |
| Operating Pressure | 25-125 PSI |
| Temperature Range | 34-120°F |
| Service Life | 5-7 years (typical residential use) |
Piston Replacement Procedure
- Bypass water supply, depressurize system, and disconnect valve from power source
- Remove valve cover and drain assembly, then extract the old piston by lifting straight up from the valve body
- Clean valve body ports thoroughly, inspect for wear or debris, and lubricate new piston seals with silicone grease
- Install new 60102-00 piston assembly by aligning guide tabs and pressing firmly until seated, ensuring all seals are properly positioned
- Reassemble drain line and cover, restore power, and manually initiate a regeneration cycle to verify proper operation
Valve System Compatibility
The Fleck 60102-00 standard piston assembly is designed exclusively for 5600 series control valves manufactured by Pentair/Fleck. This assembly fits all standard 5600 configurations including mechanical meter, electronic meter, and time clock models. Not compatible with 5600 SXT models (which require part number 60125-00). Verify your valve model before ordering, as installing the incorrect piston assembly will result in improper valve cycling and potential system damage.
Description
Fleck 5600 Piston Assembly Technical Details
| Manufacturer | Fleck (Pentair) |
| Part Number | 60102-00 |
| Valve Model | 5600 Standard (STD) |
| Assembly Type | Complete piston with seals and spacers |
| Material | Reinforced composite with Buna-N seals |
| Operating Pressure | 25-125 PSI |
| Temperature Range | 34-120°F |
| Service Life | 5-7 years (typical residential use) |
Piston Replacement Procedure
- Bypass water supply, depressurize system, and disconnect valve from power source
- Remove valve cover and drain assembly, then extract the old piston by lifting straight up from the valve body
- Clean valve body ports thoroughly, inspect for wear or debris, and lubricate new piston seals with silicone grease
- Install new 60102-00 piston assembly by aligning guide tabs and pressing firmly until seated, ensuring all seals are properly positioned
- Reassemble drain line and cover, restore power, and manually initiate a regeneration cycle to verify proper operation
Valve System Compatibility
The Fleck 60102-00 standard piston assembly is designed exclusively for 5600 series control valves manufactured by Pentair/Fleck. This assembly fits all standard 5600 configurations including mechanical meter, electronic meter, and time clock models. Not compatible with 5600 SXT models (which require part number 60125-00). Verify your valve model before ordering, as installing the incorrect piston assembly will result in improper valve cycling and potential system damage.
