HomeStore

Fleck (60129) 2850 Piston Seals & Spacers

Product image 1

Fleck (60129) 2850 Piston Seals & Spacers

The Fleck 60129 piston seals and spacers kit is an essential replacement component for maintaining the hydraulic integrity of your Fleck 2850 control valve. These OEM seals prevent bypass and ensure proper regeneration cycles in residential and commercial water softening systems.
SPECIFICATIONS

Fleck 2850 Piston Seal Kit Details

Manufacturer Fleck
Part Number 60129
Compatible Valve Fleck 2850 Control Valve
Component Type Piston Seals & Spacers
Material NBR Rubber / Nylon Spacers
Application Water Softener Control Valves
Service Life 3-5 years typical
Installation Type Replacement Service Kit
INSTALLATION & USE

Replacing Piston Seals in Fleck 2850 Valves

  1. Depressurize the system and disconnect power to the control valve, then remove the valve cover and lift out the piston assembly
  2. Remove old seals and spacers from the piston, clean all surfaces thoroughly with a lint-free cloth to remove mineral deposits or debris
  3. Install new seals and spacers per the Fleck 2850 service manual, ensuring proper orientation and seating in the piston grooves
  4. Lubricate seals lightly with silicone grease, reinstall the piston assembly, and run a manual regeneration cycle to verify proper sealing
COMPATIBILITY

Fleck 2850 Valve Systems

This seal and spacer kit is designed exclusively for Fleck 2850 control valves used in residential and light commercial water softener applications. The 2850 valve is commonly found in mid-capacity softening systems ranging from 0.75 to 2.0 cubic feet of resin. Not compatible with Fleck 5600, 7000, or 9000 series valves, which require different seal dimensions and piston configurations.

🔧 Pro Tip: Replace piston seals every 3-5 years or immediately if you notice salt carryover into treated water, which indicates seal failure and internal bypass. Keep a spare seal kit on hand to minimize downtime during routine maintenance.
The Fleck 60129 piston seals and spacers kit is an essential replacement component for maintaining the hydraulic integrity of your Fleck 2850 control valve. These OEM seals prevent bypass and ensure proper regeneration cycles in residential and commercial water softening systems.
SPECIFICATIONS

Fleck 2850 Piston Seal Kit Details

Manufacturer Fleck
Part Number 60129
Compatible Valve Fleck 2850 Control Valve
Component Type Piston Seals & Spacers
Material NBR Rubber / Nylon Spacers
Application Water Softener Control Valves
Service Life 3-5 years typical
Installation Type Replacement Service Kit
INSTALLATION & USE

Replacing Piston Seals in Fleck 2850 Valves

  1. Depressurize the system and disconnect power to the control valve, then remove the valve cover and lift out the piston assembly
  2. Remove old seals and spacers from the piston, clean all surfaces thoroughly with a lint-free cloth to remove mineral deposits or debris
  3. Install new seals and spacers per the Fleck 2850 service manual, ensuring proper orientation and seating in the piston grooves
  4. Lubricate seals lightly with silicone grease, reinstall the piston assembly, and run a manual regeneration cycle to verify proper sealing
COMPATIBILITY

Fleck 2850 Valve Systems

This seal and spacer kit is designed exclusively for Fleck 2850 control valves used in residential and light commercial water softener applications. The 2850 valve is commonly found in mid-capacity softening systems ranging from 0.75 to 2.0 cubic feet of resin. Not compatible with Fleck 5600, 7000, or 9000 series valves, which require different seal dimensions and piston configurations.

🔧 Pro Tip: Replace piston seals every 3-5 years or immediately if you notice salt carryover into treated water, which indicates seal failure and internal bypass. Keep a spare seal kit on hand to minimize downtime during routine maintenance.
$191.67
Fleck (60129) 2850 Piston Seals & Spacers—
$191.67

Description

The Fleck 60129 piston seals and spacers kit is an essential replacement component for maintaining the hydraulic integrity of your Fleck 2850 control valve. These OEM seals prevent bypass and ensure proper regeneration cycles in residential and commercial water softening systems.
SPECIFICATIONS

Fleck 2850 Piston Seal Kit Details

Manufacturer Fleck
Part Number 60129
Compatible Valve Fleck 2850 Control Valve
Component Type Piston Seals & Spacers
Material NBR Rubber / Nylon Spacers
Application Water Softener Control Valves
Service Life 3-5 years typical
Installation Type Replacement Service Kit
INSTALLATION & USE

Replacing Piston Seals in Fleck 2850 Valves

  1. Depressurize the system and disconnect power to the control valve, then remove the valve cover and lift out the piston assembly
  2. Remove old seals and spacers from the piston, clean all surfaces thoroughly with a lint-free cloth to remove mineral deposits or debris
  3. Install new seals and spacers per the Fleck 2850 service manual, ensuring proper orientation and seating in the piston grooves
  4. Lubricate seals lightly with silicone grease, reinstall the piston assembly, and run a manual regeneration cycle to verify proper sealing
COMPATIBILITY

Fleck 2850 Valve Systems

This seal and spacer kit is designed exclusively for Fleck 2850 control valves used in residential and light commercial water softener applications. The 2850 valve is commonly found in mid-capacity softening systems ranging from 0.75 to 2.0 cubic feet of resin. Not compatible with Fleck 5600, 7000, or 9000 series valves, which require different seal dimensions and piston configurations.

🔧 Pro Tip: Replace piston seals every 3-5 years or immediately if you notice salt carryover into treated water, which indicates seal failure and internal bypass. Keep a spare seal kit on hand to minimize downtime during routine maintenance.
Fleck (60129) 2850 Piston Seals & Spacers | Isopure Water