Fleck (61454-4) Injector #4 Green for 7000 SXT for 21" diameter tanks
Technical Details
| Manufacturer | Fleck |
| Part Number | 61454-4 |
| Injector Size | #4 (Green) |
| Compatible Valve | Fleck 7000 SXT |
| Tank Diameter | 21 inches |
| Material | Chemical-resistant polymer |
| Function | Brine draw and backwash flow control |
| Color Code | Green |
Replacement Procedure
- Relieve system pressure and initiate a manual backwash cycle to clear the valve body
- Remove the injector cap from the control valve and extract the old injector assembly using needle-nose pliers
- Insert the new green #4 injector into the throat, ensuring the o-ring seats properly in the valve body
- Hand-tighten the injector cap and run a complete regeneration cycle to verify proper brine draw
System Requirements
This green #4 injector is sized exclusively for Fleck 7000 SXT control valves installed on 21-inch diameter mineral tanks. Using the incorrect injector size will result in improper brine draw, incomplete regeneration, and reduced softening capacity. Fleck color-codes injectors to match specific tank diameters—always verify your tank size before ordering. The 7000 SXT valve is commonly found in residential systems with 1.0 to 1.5 cubic feet of resin.
Technical Details
| Manufacturer | Fleck |
| Part Number | 61454-4 |
| Injector Size | #4 (Green) |
| Compatible Valve | Fleck 7000 SXT |
| Tank Diameter | 21 inches |
| Material | Chemical-resistant polymer |
| Function | Brine draw and backwash flow control |
| Color Code | Green |
Replacement Procedure
- Relieve system pressure and initiate a manual backwash cycle to clear the valve body
- Remove the injector cap from the control valve and extract the old injector assembly using needle-nose pliers
- Insert the new green #4 injector into the throat, ensuring the o-ring seats properly in the valve body
- Hand-tighten the injector cap and run a complete regeneration cycle to verify proper brine draw
System Requirements
This green #4 injector is sized exclusively for Fleck 7000 SXT control valves installed on 21-inch diameter mineral tanks. Using the incorrect injector size will result in improper brine draw, incomplete regeneration, and reduced softening capacity. Fleck color-codes injectors to match specific tank diameters—always verify your tank size before ordering. The 7000 SXT valve is commonly found in residential systems with 1.0 to 1.5 cubic feet of resin.
Original: $27.14
-65%$27.14
$9.50Description
Technical Details
| Manufacturer | Fleck |
| Part Number | 61454-4 |
| Injector Size | #4 (Green) |
| Compatible Valve | Fleck 7000 SXT |
| Tank Diameter | 21 inches |
| Material | Chemical-resistant polymer |
| Function | Brine draw and backwash flow control |
| Color Code | Green |
Replacement Procedure
- Relieve system pressure and initiate a manual backwash cycle to clear the valve body
- Remove the injector cap from the control valve and extract the old injector assembly using needle-nose pliers
- Insert the new green #4 injector into the throat, ensuring the o-ring seats properly in the valve body
- Hand-tighten the injector cap and run a complete regeneration cycle to verify proper brine draw
System Requirements
This green #4 injector is sized exclusively for Fleck 7000 SXT control valves installed on 21-inch diameter mineral tanks. Using the incorrect injector size will result in improper brine draw, incomplete regeneration, and reduced softening capacity. Fleck color-codes injectors to match specific tank diameters—always verify your tank size before ordering. The 7000 SXT valve is commonly found in residential systems with 1.0 to 1.5 cubic feet of resin.
