Fleck (61456-10) DLFC ASSY, 1" 10.0 GPM, 7000
Fleck 61456-10 DLFC Assembly Technical Details
| Manufacturer Part Number | Fleck 61456-10 |
| Component Type | Drain Line Flow Control Assembly |
| Flow Rate | 10.0 GPM |
| Connection Size | 1 inch |
| Compatible Valve Series | Fleck 7000 |
| Application | Water softener regeneration drain flow regulation |
| Installation Location | Drain line outlet on control valve |
Installing the DLFC Assembly
- Shut off water supply and depressurize the system before beginning work on the Fleck 7000 control valve.
- Remove the existing drain line flow control by unscrewing it counterclockwise from the 1-inch drain port on the valve body.
- Thread the Fleck 61456-10 DLFC assembly clockwise into the drain port until hand-tight, then snug with a wrench without overtightening.
- Reconnect the drain line tubing to the outlet end of the flow control and secure with the appropriate clamp or fitting.
- Run a manual regeneration cycle and verify drain flow rate stays within specification without backpressure issues.
System Compatibility
The Fleck 61456-10 DLFC assembly is designed specifically for Fleck 7000 series control valves with 1-inch drain connections. This flow control is calibrated for systems requiring a 10.0 GPM drain flow rate during backwash and regeneration cycles. Verify your existing system specifications before ordering, as using an incorrect flow rate can cause incomplete regeneration or excessive drain line pressure. This component is a direct factory replacement for worn or damaged drain line flow controls on residential and light commercial water softener installations.
Fleck 61456-10 DLFC Assembly Technical Details
| Manufacturer Part Number | Fleck 61456-10 |
| Component Type | Drain Line Flow Control Assembly |
| Flow Rate | 10.0 GPM |
| Connection Size | 1 inch |
| Compatible Valve Series | Fleck 7000 |
| Application | Water softener regeneration drain flow regulation |
| Installation Location | Drain line outlet on control valve |
Installing the DLFC Assembly
- Shut off water supply and depressurize the system before beginning work on the Fleck 7000 control valve.
- Remove the existing drain line flow control by unscrewing it counterclockwise from the 1-inch drain port on the valve body.
- Thread the Fleck 61456-10 DLFC assembly clockwise into the drain port until hand-tight, then snug with a wrench without overtightening.
- Reconnect the drain line tubing to the outlet end of the flow control and secure with the appropriate clamp or fitting.
- Run a manual regeneration cycle and verify drain flow rate stays within specification without backpressure issues.
System Compatibility
The Fleck 61456-10 DLFC assembly is designed specifically for Fleck 7000 series control valves with 1-inch drain connections. This flow control is calibrated for systems requiring a 10.0 GPM drain flow rate during backwash and regeneration cycles. Verify your existing system specifications before ordering, as using an incorrect flow rate can cause incomplete regeneration or excessive drain line pressure. This component is a direct factory replacement for worn or damaged drain line flow controls on residential and light commercial water softener installations.
Description
Fleck 61456-10 DLFC Assembly Technical Details
| Manufacturer Part Number | Fleck 61456-10 |
| Component Type | Drain Line Flow Control Assembly |
| Flow Rate | 10.0 GPM |
| Connection Size | 1 inch |
| Compatible Valve Series | Fleck 7000 |
| Application | Water softener regeneration drain flow regulation |
| Installation Location | Drain line outlet on control valve |
Installing the DLFC Assembly
- Shut off water supply and depressurize the system before beginning work on the Fleck 7000 control valve.
- Remove the existing drain line flow control by unscrewing it counterclockwise from the 1-inch drain port on the valve body.
- Thread the Fleck 61456-10 DLFC assembly clockwise into the drain port until hand-tight, then snug with a wrench without overtightening.
- Reconnect the drain line tubing to the outlet end of the flow control and secure with the appropriate clamp or fitting.
- Run a manual regeneration cycle and verify drain flow rate stays within specification without backpressure issues.
System Compatibility
The Fleck 61456-10 DLFC assembly is designed specifically for Fleck 7000 series control valves with 1-inch drain connections. This flow control is calibrated for systems requiring a 10.0 GPM drain flow rate during backwash and regeneration cycles. Verify your existing system specifications before ordering, as using an incorrect flow rate can cause incomplete regeneration or excessive drain line pressure. This component is a direct factory replacement for worn or damaged drain line flow controls on residential and light commercial water softener installations.
