Fleck 7000 (4541241-01) Part Fl Connector, 1.0"
Technical Details
| Manufacturer | Fleck (Pentair) |
| Part Number | 4541241-01 |
| Connection Size | 1.0 inch |
| Compatible System | Fleck 7000 Series Control Valves |
| Material | High-grade thermoplastic |
| Application | Water softener flow connection |
| Operating Pressure | Up to 125 PSI |
| Temperature Range | 40°F to 120°F |
Replacement Procedure
- Shut off water supply and relieve system pressure by initiating a manual regeneration cycle or opening a bypass valve
- Remove the control valve cover and disconnect the existing connector, noting the orientation and position for proper reinstallation
- Install the new Fleck 7000 flow connector (4541241-01) in the same position, ensuring all sealing surfaces are clean and properly seated
- Reassemble the control valve, restore water pressure gradually, and check all connection points for leaks during the first regeneration cycle
System Requirements
This 1.0" flow connector is engineered specifically for Fleck 7000 series control valves and is not interchangeable with other Fleck models such as the 5600 or 9000 series. Verify your control valve model number before ordering to ensure proper fitment. This genuine Fleck replacement part maintains the original equipment specifications and warranty compliance for your water softening system.
Technical Details
| Manufacturer | Fleck (Pentair) |
| Part Number | 4541241-01 |
| Connection Size | 1.0 inch |
| Compatible System | Fleck 7000 Series Control Valves |
| Material | High-grade thermoplastic |
| Application | Water softener flow connection |
| Operating Pressure | Up to 125 PSI |
| Temperature Range | 40°F to 120°F |
Replacement Procedure
- Shut off water supply and relieve system pressure by initiating a manual regeneration cycle or opening a bypass valve
- Remove the control valve cover and disconnect the existing connector, noting the orientation and position for proper reinstallation
- Install the new Fleck 7000 flow connector (4541241-01) in the same position, ensuring all sealing surfaces are clean and properly seated
- Reassemble the control valve, restore water pressure gradually, and check all connection points for leaks during the first regeneration cycle
System Requirements
This 1.0" flow connector is engineered specifically for Fleck 7000 series control valves and is not interchangeable with other Fleck models such as the 5600 or 9000 series. Verify your control valve model number before ordering to ensure proper fitment. This genuine Fleck replacement part maintains the original equipment specifications and warranty compliance for your water softening system.
Original: $3.49
-65%$3.49
$1.22Description
Technical Details
| Manufacturer | Fleck (Pentair) |
| Part Number | 4541241-01 |
| Connection Size | 1.0 inch |
| Compatible System | Fleck 7000 Series Control Valves |
| Material | High-grade thermoplastic |
| Application | Water softener flow connection |
| Operating Pressure | Up to 125 PSI |
| Temperature Range | 40°F to 120°F |
Replacement Procedure
- Shut off water supply and relieve system pressure by initiating a manual regeneration cycle or opening a bypass valve
- Remove the control valve cover and disconnect the existing connector, noting the orientation and position for proper reinstallation
- Install the new Fleck 7000 flow connector (4541241-01) in the same position, ensuring all sealing surfaces are clean and properly seated
- Reassemble the control valve, restore water pressure gradually, and check all connection points for leaks during the first regeneration cycle
System Requirements
This 1.0" flow connector is engineered specifically for Fleck 7000 series control valves and is not interchangeable with other Fleck models such as the 5600 or 9000 series. Verify your control valve model number before ordering to ensure proper fitment. This genuine Fleck replacement part maintains the original equipment specifications and warranty compliance for your water softening system.
