Microfilter (G6T5-4W) UV Replacement Lamp 4 Watts For OPP425 or UV-405RL - 0.5 GPM
This Microfilter G6T5-4W replacement lamp delivers 4 watts of ultraviolet disinfection for the OPP425 and UV-405RL systems, engineered for point-of-use applications up to 0.5 GPM. Replace annually or at 9000 hours to maintain consistent microbial reduction performance.
SPECIFICATIONS
Microfilter G6T5-4W UV Lamp Technical Details
| Model Number | G6T5-4W |
| Power Rating | 4 Watts |
| Flow Rate | 0.5 GPM maximum |
| Lamp Life | 9000 hours or 1 year |
| Compatible Systems | OPP425, UV-405RL (Intelifill) |
| Vendor | Microfilter |
| Application | Point-of-use UV disinfection |
| Replacement Frequency | Annual or 9000 operating hours |
INSTALLATION & USE
Replacing Your UV Lamp
- Disconnect power to the UV-405RL or OPP425 system and relieve water pressure before opening the chamber
- Remove the quartz sleeve carefully, then extract the old G6T5-4W lamp from the electrical connector without touching the new lamp's glass surface
- Insert the new 4-watt lamp into the connector, reassemble the quartz sleeve and chamber, then restore power and verify the indicator light confirms operation
- Record the installation date and set a reminder for replacement in 12 months or at 9000 hours of use
COMPATIBILITY
System Requirements
The Microfilter G6T5-4W lamp is designed specifically for the UV-405RL (Intelifill) and OPP425 ultraviolet systems operating at flow rates up to 0.5 gallons per minute. This lamp is not interchangeable with higher-wattage models or systems rated for higher flow capacities. Verify your system model number before ordering to ensure proper fit and UV dose delivery.
🔧 Pro tip: UV lamp output degrades over time even if the bulb still glows. Replace at the full 12-month interval regardless of visible light to maintain microbial reduction effectiveness, and keep a spare lamp on hand to avoid gaps in disinfection coverage.
This Microfilter G6T5-4W replacement lamp delivers 4 watts of ultraviolet disinfection for the OPP425 and UV-405RL systems, engineered for point-of-use applications up to 0.5 GPM. Replace annually or at 9000 hours to maintain consistent microbial reduction performance.
SPECIFICATIONS
Microfilter G6T5-4W UV Lamp Technical Details
| Model Number | G6T5-4W |
| Power Rating | 4 Watts |
| Flow Rate | 0.5 GPM maximum |
| Lamp Life | 9000 hours or 1 year |
| Compatible Systems | OPP425, UV-405RL (Intelifill) |
| Vendor | Microfilter |
| Application | Point-of-use UV disinfection |
| Replacement Frequency | Annual or 9000 operating hours |
INSTALLATION & USE
Replacing Your UV Lamp
- Disconnect power to the UV-405RL or OPP425 system and relieve water pressure before opening the chamber
- Remove the quartz sleeve carefully, then extract the old G6T5-4W lamp from the electrical connector without touching the new lamp's glass surface
- Insert the new 4-watt lamp into the connector, reassemble the quartz sleeve and chamber, then restore power and verify the indicator light confirms operation
- Record the installation date and set a reminder for replacement in 12 months or at 9000 hours of use
COMPATIBILITY
System Requirements
The Microfilter G6T5-4W lamp is designed specifically for the UV-405RL (Intelifill) and OPP425 ultraviolet systems operating at flow rates up to 0.5 gallons per minute. This lamp is not interchangeable with higher-wattage models or systems rated for higher flow capacities. Verify your system model number before ordering to ensure proper fit and UV dose delivery.
🔧 Pro tip: UV lamp output degrades over time even if the bulb still glows. Replace at the full 12-month interval regardless of visible light to maintain microbial reduction effectiveness, and keep a spare lamp on hand to avoid gaps in disinfection coverage.
$26.99
Microfilter (G6T5-4W) UV Replacement Lamp 4 Watts For OPP425 or UV-405RL - 0.5 GPM—
$26.99
Description
This Microfilter G6T5-4W replacement lamp delivers 4 watts of ultraviolet disinfection for the OPP425 and UV-405RL systems, engineered for point-of-use applications up to 0.5 GPM. Replace annually or at 9000 hours to maintain consistent microbial reduction performance.
SPECIFICATIONS
Microfilter G6T5-4W UV Lamp Technical Details
| Model Number | G6T5-4W |
| Power Rating | 4 Watts |
| Flow Rate | 0.5 GPM maximum |
| Lamp Life | 9000 hours or 1 year |
| Compatible Systems | OPP425, UV-405RL (Intelifill) |
| Vendor | Microfilter |
| Application | Point-of-use UV disinfection |
| Replacement Frequency | Annual or 9000 operating hours |
INSTALLATION & USE
Replacing Your UV Lamp
- Disconnect power to the UV-405RL or OPP425 system and relieve water pressure before opening the chamber
- Remove the quartz sleeve carefully, then extract the old G6T5-4W lamp from the electrical connector without touching the new lamp's glass surface
- Insert the new 4-watt lamp into the connector, reassemble the quartz sleeve and chamber, then restore power and verify the indicator light confirms operation
- Record the installation date and set a reminder for replacement in 12 months or at 9000 hours of use
COMPATIBILITY
System Requirements
The Microfilter G6T5-4W lamp is designed specifically for the UV-405RL (Intelifill) and OPP425 ultraviolet systems operating at flow rates up to 0.5 gallons per minute. This lamp is not interchangeable with higher-wattage models or systems rated for higher flow capacities. Verify your system model number before ordering to ensure proper fit and UV dose delivery.
🔧 Pro tip: UV lamp output degrades over time even if the bulb still glows. Replace at the full 12-month interval regardless of visible light to maintain microbial reduction effectiveness, and keep a spare lamp on hand to avoid gaps in disinfection coverage.
