HomeStore

Pentek - WB-ZP - Zinc Plated Mounting Bracket for Big Blue Housings

Product image 1

Pentek - WB-ZP - Zinc Plated Mounting Bracket for Big Blue Housings

The Pentek WB-ZP zinc plated mounting bracket provides secure wall installation for all 10-inch and 20-inch Big Blue filter housings. Constructed from stainless steel with a corrosion-resistant zinc plated finish, this bracket ensures your filtration system stays firmly mounted through years of operation.
SPECIFICATIONS

Pentek WB-ZP Bracket Dimensions & Construction

Model Number Pentek WB-ZP
Material Stainless Steel with Zinc Plating
Housing Compatibility All 10" and 20" Big Blue Housings
Overall Dimensions 4.5" W × 5.75" H × 7.25" D
Cap Hole Spacing 3.25" center to center
Wall Mount Hole Pattern 3.25" side to side, 3.75" top to bottom
Finish Corrosion-resistant zinc plating
Installation Type Wall mount bracket only
INSTALLATION & USE

Mounting Your Big Blue Housing

  1. Position the bracket on the wall at desired height, ensuring adequate clearance below for housing removal during filter changes.
  2. Mark and drill mounting holes using the 3.25" × 3.75" hole pattern, then secure bracket to wall with appropriate fasteners for your wall type.
  3. Align the Big Blue housing cap with the 3.25" center-to-center holes on the bracket, then secure the housing through the mounting tabs on the filter cap.
  4. Verify the housing hangs level and all mounting hardware is tightened before connecting water lines and pressurizing the system.
COMPATIBILITY

Works with All Pentek Big Blue Housings

The Pentek WB-ZP bracket is universally compatible with all 10-inch and 20-inch Big Blue filter housings from Pentek, including standard, clear, and specialty models. The standardized 3.25-inch cap hole spacing fits every Big Blue housing cap, making this the go-to mounting solution for residential, commercial, and industrial whole-house filtration installations. The zinc plated finish provides corrosion resistance in damp environments like basements, garages, and mechanical rooms.

🔧 Pro tip: Mount the bracket high enough that the housing bottom sits at least 6 inches above the floor. This gives you clearance to unscrew the sump during filter changes without kneeling or removing the entire housing from the bracket.
The Pentek WB-ZP zinc plated mounting bracket provides secure wall installation for all 10-inch and 20-inch Big Blue filter housings. Constructed from stainless steel with a corrosion-resistant zinc plated finish, this bracket ensures your filtration system stays firmly mounted through years of operation.
SPECIFICATIONS

Pentek WB-ZP Bracket Dimensions & Construction

Model Number Pentek WB-ZP
Material Stainless Steel with Zinc Plating
Housing Compatibility All 10" and 20" Big Blue Housings
Overall Dimensions 4.5" W × 5.75" H × 7.25" D
Cap Hole Spacing 3.25" center to center
Wall Mount Hole Pattern 3.25" side to side, 3.75" top to bottom
Finish Corrosion-resistant zinc plating
Installation Type Wall mount bracket only
INSTALLATION & USE

Mounting Your Big Blue Housing

  1. Position the bracket on the wall at desired height, ensuring adequate clearance below for housing removal during filter changes.
  2. Mark and drill mounting holes using the 3.25" × 3.75" hole pattern, then secure bracket to wall with appropriate fasteners for your wall type.
  3. Align the Big Blue housing cap with the 3.25" center-to-center holes on the bracket, then secure the housing through the mounting tabs on the filter cap.
  4. Verify the housing hangs level and all mounting hardware is tightened before connecting water lines and pressurizing the system.
COMPATIBILITY

Works with All Pentek Big Blue Housings

The Pentek WB-ZP bracket is universally compatible with all 10-inch and 20-inch Big Blue filter housings from Pentek, including standard, clear, and specialty models. The standardized 3.25-inch cap hole spacing fits every Big Blue housing cap, making this the go-to mounting solution for residential, commercial, and industrial whole-house filtration installations. The zinc plated finish provides corrosion resistance in damp environments like basements, garages, and mechanical rooms.

🔧 Pro tip: Mount the bracket high enough that the housing bottom sits at least 6 inches above the floor. This gives you clearance to unscrew the sump during filter changes without kneeling or removing the entire housing from the bracket.
$28.08

Original: $80.23

-65%
Pentek - WB-ZP - Zinc Plated Mounting Bracket for Big Blue Housings—

$80.23

$28.08

Description

The Pentek WB-ZP zinc plated mounting bracket provides secure wall installation for all 10-inch and 20-inch Big Blue filter housings. Constructed from stainless steel with a corrosion-resistant zinc plated finish, this bracket ensures your filtration system stays firmly mounted through years of operation.
SPECIFICATIONS

Pentek WB-ZP Bracket Dimensions & Construction

Model Number Pentek WB-ZP
Material Stainless Steel with Zinc Plating
Housing Compatibility All 10" and 20" Big Blue Housings
Overall Dimensions 4.5" W × 5.75" H × 7.25" D
Cap Hole Spacing 3.25" center to center
Wall Mount Hole Pattern 3.25" side to side, 3.75" top to bottom
Finish Corrosion-resistant zinc plating
Installation Type Wall mount bracket only
INSTALLATION & USE

Mounting Your Big Blue Housing

  1. Position the bracket on the wall at desired height, ensuring adequate clearance below for housing removal during filter changes.
  2. Mark and drill mounting holes using the 3.25" × 3.75" hole pattern, then secure bracket to wall with appropriate fasteners for your wall type.
  3. Align the Big Blue housing cap with the 3.25" center-to-center holes on the bracket, then secure the housing through the mounting tabs on the filter cap.
  4. Verify the housing hangs level and all mounting hardware is tightened before connecting water lines and pressurizing the system.
COMPATIBILITY

Works with All Pentek Big Blue Housings

The Pentek WB-ZP bracket is universally compatible with all 10-inch and 20-inch Big Blue filter housings from Pentek, including standard, clear, and specialty models. The standardized 3.25-inch cap hole spacing fits every Big Blue housing cap, making this the go-to mounting solution for residential, commercial, and industrial whole-house filtration installations. The zinc plated finish provides corrosion resistance in damp environments like basements, garages, and mechanical rooms.

🔧 Pro tip: Mount the bracket high enough that the housing bottom sits at least 6 inches above the floor. This gives you clearance to unscrew the sump during filter changes without kneeling or removing the entire housing from the bracket.
Pentek - WB-ZP - Zinc Plated Mounting Bracket for Big Blue Housings | Isopure Water