HomeStore

Pro Products (RF10N) "Resin Mate" Automatic Cleaning System 1.0 oz Feeder

Product image 1

Pro Products (RF10N) "Resin Mate" Automatic Cleaning System 1.0 oz Feeder

The Pro Products RF10N Resin Mate automatic feeder delivers 1 oz. of cleaning solution daily to your water softener's brine well, protecting resin beads from iron fouling and extending system life. Designed for well water applications where mineral buildup and iron contamination accelerate resin deterioration.
SPECIFICATIONS

Pro Products RF10N Resin Mate Technical Details

Model Number RF10N
Product Name Resin Mate Automatic Cleaning System
Feed Rate 1.0 oz per day
Feed Method Continuous controlled drip
Application Well water softener systems
Compatible Cleaner Res Care (sold separately)
Installation Location Softener brine well
Manufacturer Pro Products
INSTALLATION & USE

Setting Up the RF10N Feeder

  1. Fill the RF10N feeder with Pro Products Res Care resin cleaner according to bottle instructions
  2. Position the feeder above your softener's brine well and secure the drip tube into the well opening
  3. Adjust the drip rate to deliver 1 oz. per day, then monitor for the first 48 hours to confirm consistent flow
  4. Refill the feeder reservoir as needed based on usage rate and Res Care capacity
COMPATIBILITY

System Requirements

The RF10N Resin Mate feeder works with any standard water softener equipped with a brine tank and well. Intended for well water applications where iron, manganese, and mineral fouling compromise resin performance. Requires Pro Products Res Care resin cleaner (model RC06N or RC12N, sold separately) for operation. The 1 oz. daily feed rate is calibrated for typical residential softener systems processing well water with moderate to heavy iron content.

🔧 Pro Tip: Mark your calendar when you install the RF10N and note the Res Care level. After two weeks, check consumption rate to establish your refill schedule. Well water with higher iron levels may benefit from slight feed rate increases during seasonal changes when iron concentration fluctuates.
The Pro Products RF10N Resin Mate automatic feeder delivers 1 oz. of cleaning solution daily to your water softener's brine well, protecting resin beads from iron fouling and extending system life. Designed for well water applications where mineral buildup and iron contamination accelerate resin deterioration.
SPECIFICATIONS

Pro Products RF10N Resin Mate Technical Details

Model Number RF10N
Product Name Resin Mate Automatic Cleaning System
Feed Rate 1.0 oz per day
Feed Method Continuous controlled drip
Application Well water softener systems
Compatible Cleaner Res Care (sold separately)
Installation Location Softener brine well
Manufacturer Pro Products
INSTALLATION & USE

Setting Up the RF10N Feeder

  1. Fill the RF10N feeder with Pro Products Res Care resin cleaner according to bottle instructions
  2. Position the feeder above your softener's brine well and secure the drip tube into the well opening
  3. Adjust the drip rate to deliver 1 oz. per day, then monitor for the first 48 hours to confirm consistent flow
  4. Refill the feeder reservoir as needed based on usage rate and Res Care capacity
COMPATIBILITY

System Requirements

The RF10N Resin Mate feeder works with any standard water softener equipped with a brine tank and well. Intended for well water applications where iron, manganese, and mineral fouling compromise resin performance. Requires Pro Products Res Care resin cleaner (model RC06N or RC12N, sold separately) for operation. The 1 oz. daily feed rate is calibrated for typical residential softener systems processing well water with moderate to heavy iron content.

🔧 Pro Tip: Mark your calendar when you install the RF10N and note the Res Care level. After two weeks, check consumption rate to establish your refill schedule. Well water with higher iron levels may benefit from slight feed rate increases during seasonal changes when iron concentration fluctuates.
$5.95

Original: $17.00

-65%
Pro Products (RF10N) "Resin Mate" Automatic Cleaning System 1.0 oz Feeder—

$17.00

$5.95

Description

The Pro Products RF10N Resin Mate automatic feeder delivers 1 oz. of cleaning solution daily to your water softener's brine well, protecting resin beads from iron fouling and extending system life. Designed for well water applications where mineral buildup and iron contamination accelerate resin deterioration.
SPECIFICATIONS

Pro Products RF10N Resin Mate Technical Details

Model Number RF10N
Product Name Resin Mate Automatic Cleaning System
Feed Rate 1.0 oz per day
Feed Method Continuous controlled drip
Application Well water softener systems
Compatible Cleaner Res Care (sold separately)
Installation Location Softener brine well
Manufacturer Pro Products
INSTALLATION & USE

Setting Up the RF10N Feeder

  1. Fill the RF10N feeder with Pro Products Res Care resin cleaner according to bottle instructions
  2. Position the feeder above your softener's brine well and secure the drip tube into the well opening
  3. Adjust the drip rate to deliver 1 oz. per day, then monitor for the first 48 hours to confirm consistent flow
  4. Refill the feeder reservoir as needed based on usage rate and Res Care capacity
COMPATIBILITY

System Requirements

The RF10N Resin Mate feeder works with any standard water softener equipped with a brine tank and well. Intended for well water applications where iron, manganese, and mineral fouling compromise resin performance. Requires Pro Products Res Care resin cleaner (model RC06N or RC12N, sold separately) for operation. The 1 oz. daily feed rate is calibrated for typical residential softener systems processing well water with moderate to heavy iron content.

🔧 Pro Tip: Mark your calendar when you install the RF10N and note the Res Care level. After two weeks, check consumption rate to establish your refill schedule. Well water with higher iron levels may benefit from slight feed rate increases during seasonal changes when iron concentration fluctuates.
Pro Products (RF10N) "Resin Mate" Automatic Cleaning System 1.0 oz Feeder | Isopure Water