Pro Products (SS24RO) Sani System; Reverse Osmosis Unit Sanitizer
Sani System Reverse Osmosis Unit Sanitizer
Pro Products SS24RO Sani System kills 99.9% of harmful bacteria in reverse osmosis units without chlorine, oxidizers, or acids that degrade membranes and system components. Each pre-measured packet delivers precise dosing for complete system sanitization in just sixty seconds of contact time.
Complete RO Sanitization Protocol
System Preparation
Shut off water supply to the RO unit and remove the membrane and all filter cartridges. Open the pure water faucet to depressurize the system completely. Store removed filters and membranes in water to prevent drying and damage.
Sanitizer Application
Pour the entire SS24RO packet directly into the first main housing unit and reinstall the cartridge or dummy filter. Close the pure water faucet and turn on the water supply to allow the system to fill, typically within five to ten minutes.
Bactericidal Action
Once the system is fully pressurized, allow sixty seconds of contact time for complete sanitization. The non-corrosive formula works without harming membranes, o-rings, or housing components.
System Restoration
Flush the system twice to remove all sanitizer residue. Reinstall the reverse osmosis membrane and all filter cartridges, then return the system to normal operation.
Universal RO System Application
The Pro Products SS24RO Sani System is formulated for use in all residential and commercial reverse osmosis systems regardless of membrane type or housing configuration. Unlike chlorine-based sanitizers that can permanently damage thin-film composite membranes, this EPA and NSF approved concentrate is safe for use with cellulose acetate and TFC membranes, standard and high-rejection configurations, and all housing materials including polypropylene, ABS, and stainless steel. Each pre-measured packet eliminates guesswork and prevents over-dosing or under-dosing that compromises sanitization effectiveness or system integrity.
Sani System Reverse Osmosis Unit Sanitizer
Pro Products SS24RO Sani System kills 99.9% of harmful bacteria in reverse osmosis units without chlorine, oxidizers, or acids that degrade membranes and system components. Each pre-measured packet delivers precise dosing for complete system sanitization in just sixty seconds of contact time.
Complete RO Sanitization Protocol
System Preparation
Shut off water supply to the RO unit and remove the membrane and all filter cartridges. Open the pure water faucet to depressurize the system completely. Store removed filters and membranes in water to prevent drying and damage.
Sanitizer Application
Pour the entire SS24RO packet directly into the first main housing unit and reinstall the cartridge or dummy filter. Close the pure water faucet and turn on the water supply to allow the system to fill, typically within five to ten minutes.
Bactericidal Action
Once the system is fully pressurized, allow sixty seconds of contact time for complete sanitization. The non-corrosive formula works without harming membranes, o-rings, or housing components.
System Restoration
Flush the system twice to remove all sanitizer residue. Reinstall the reverse osmosis membrane and all filter cartridges, then return the system to normal operation.
Universal RO System Application
The Pro Products SS24RO Sani System is formulated for use in all residential and commercial reverse osmosis systems regardless of membrane type or housing configuration. Unlike chlorine-based sanitizers that can permanently damage thin-film composite membranes, this EPA and NSF approved concentrate is safe for use with cellulose acetate and TFC membranes, standard and high-rejection configurations, and all housing materials including polypropylene, ABS, and stainless steel. Each pre-measured packet eliminates guesswork and prevents over-dosing or under-dosing that compromises sanitization effectiveness or system integrity.
Original: $133.79
-65%$133.79
$46.83Description
Sani System Reverse Osmosis Unit Sanitizer
Pro Products SS24RO Sani System kills 99.9% of harmful bacteria in reverse osmosis units without chlorine, oxidizers, or acids that degrade membranes and system components. Each pre-measured packet delivers precise dosing for complete system sanitization in just sixty seconds of contact time.
Complete RO Sanitization Protocol
System Preparation
Shut off water supply to the RO unit and remove the membrane and all filter cartridges. Open the pure water faucet to depressurize the system completely. Store removed filters and membranes in water to prevent drying and damage.
Sanitizer Application
Pour the entire SS24RO packet directly into the first main housing unit and reinstall the cartridge or dummy filter. Close the pure water faucet and turn on the water supply to allow the system to fill, typically within five to ten minutes.
Bactericidal Action
Once the system is fully pressurized, allow sixty seconds of contact time for complete sanitization. The non-corrosive formula works without harming membranes, o-rings, or housing components.
System Restoration
Flush the system twice to remove all sanitizer residue. Reinstall the reverse osmosis membrane and all filter cartridges, then return the system to normal operation.
Universal RO System Application
The Pro Products SS24RO Sani System is formulated for use in all residential and commercial reverse osmosis systems regardless of membrane type or housing configuration. Unlike chlorine-based sanitizers that can permanently damage thin-film composite membranes, this EPA and NSF approved concentrate is safe for use with cellulose acetate and TFC membranes, standard and high-rejection configurations, and all housing materials including polypropylene, ABS, and stainless steel. Each pre-measured packet eliminates guesswork and prevents over-dosing or under-dosing that compromises sanitization effectiveness or system integrity.
