Pura UV (34202024) O-Ring for UVBB Outer Quartz
The Pura UV 34202024 O-Ring is a precision-molded replacement seal designed specifically for UVBB outer quartz sleeves in Pura UV water disinfection systems. This critical component ensures a watertight seal between the quartz sleeve and the chamber housing, preventing leaks and maintaining optimal UV lamp performance.
SPECIFICATIONS
Technical Details
| Manufacturer | Pura UV (Hydrotech) |
| Part Number | 34202024 |
| Application | UVBB Outer Quartz Sleeve Seal |
| Material | UV-resistant elastomer |
| Function | Watertight seal for quartz sleeve housing |
| Replacement Interval | As needed or during quartz sleeve replacement |
| Service Position | Outer quartz sleeve interface |
INSTALLATION & USE
Replacement Procedure
- Shut off water supply and relieve system pressure before disassembling the UV chamber
- Remove the old O-ring from the quartz sleeve groove and clean the seating surface thoroughly with a lint-free cloth
- Lubricate the new 34202024 O-ring with food-grade silicone grease and seat it evenly in the groove
- Reassemble the quartz sleeve assembly, ensuring the O-ring is not pinched or twisted during installation
- Restore water pressure slowly and inspect for leaks around the seal before returning the system to service
COMPATIBILITY
System Compatibility
This O-ring is engineered exclusively for Pura UV UVBB series ultraviolet disinfection systems where it seals the outer quartz sleeve to the chamber body. It is not interchangeable with inner O-rings or other UV system models. Always verify part number 34202024 matches your system's service manual before ordering replacement seals for your Pura UVBB unit.
🔧 Pro tip: Replace O-rings every time you remove the quartz sleeve for cleaning or lamp replacement. Reusing compressed O-rings increases the risk of leaks and compromises the seal integrity that protects your UV lamp and electrical components from water exposure.
The Pura UV 34202024 O-Ring is a precision-molded replacement seal designed specifically for UVBB outer quartz sleeves in Pura UV water disinfection systems. This critical component ensures a watertight seal between the quartz sleeve and the chamber housing, preventing leaks and maintaining optimal UV lamp performance.
SPECIFICATIONS
Technical Details
| Manufacturer | Pura UV (Hydrotech) |
| Part Number | 34202024 |
| Application | UVBB Outer Quartz Sleeve Seal |
| Material | UV-resistant elastomer |
| Function | Watertight seal for quartz sleeve housing |
| Replacement Interval | As needed or during quartz sleeve replacement |
| Service Position | Outer quartz sleeve interface |
INSTALLATION & USE
Replacement Procedure
- Shut off water supply and relieve system pressure before disassembling the UV chamber
- Remove the old O-ring from the quartz sleeve groove and clean the seating surface thoroughly with a lint-free cloth
- Lubricate the new 34202024 O-ring with food-grade silicone grease and seat it evenly in the groove
- Reassemble the quartz sleeve assembly, ensuring the O-ring is not pinched or twisted during installation
- Restore water pressure slowly and inspect for leaks around the seal before returning the system to service
COMPATIBILITY
System Compatibility
This O-ring is engineered exclusively for Pura UV UVBB series ultraviolet disinfection systems where it seals the outer quartz sleeve to the chamber body. It is not interchangeable with inner O-rings or other UV system models. Always verify part number 34202024 matches your system's service manual before ordering replacement seals for your Pura UVBB unit.
🔧 Pro tip: Replace O-rings every time you remove the quartz sleeve for cleaning or lamp replacement. Reusing compressed O-rings increases the risk of leaks and compromises the seal integrity that protects your UV lamp and electrical components from water exposure.
$0.94
Original: $2.70
-65%Pura UV (34202024) O-Ring for UVBB Outer Quartz—
$2.70
$0.94Description
The Pura UV 34202024 O-Ring is a precision-molded replacement seal designed specifically for UVBB outer quartz sleeves in Pura UV water disinfection systems. This critical component ensures a watertight seal between the quartz sleeve and the chamber housing, preventing leaks and maintaining optimal UV lamp performance.
SPECIFICATIONS
Technical Details
| Manufacturer | Pura UV (Hydrotech) |
| Part Number | 34202024 |
| Application | UVBB Outer Quartz Sleeve Seal |
| Material | UV-resistant elastomer |
| Function | Watertight seal for quartz sleeve housing |
| Replacement Interval | As needed or during quartz sleeve replacement |
| Service Position | Outer quartz sleeve interface |
INSTALLATION & USE
Replacement Procedure
- Shut off water supply and relieve system pressure before disassembling the UV chamber
- Remove the old O-ring from the quartz sleeve groove and clean the seating surface thoroughly with a lint-free cloth
- Lubricate the new 34202024 O-ring with food-grade silicone grease and seat it evenly in the groove
- Reassemble the quartz sleeve assembly, ensuring the O-ring is not pinched or twisted during installation
- Restore water pressure slowly and inspect for leaks around the seal before returning the system to service
COMPATIBILITY
System Compatibility
This O-ring is engineered exclusively for Pura UV UVBB series ultraviolet disinfection systems where it seals the outer quartz sleeve to the chamber body. It is not interchangeable with inner O-rings or other UV system models. Always verify part number 34202024 matches your system's service manual before ordering replacement seals for your Pura UVBB unit.
🔧 Pro tip: Replace O-rings every time you remove the quartz sleeve for cleaning or lamp replacement. Reusing compressed O-rings increases the risk of leaks and compromises the seal integrity that protects your UV lamp and electrical components from water exposure.
