HomeStore

PureT (UV2-LAMP) Replacement Lamp for UV-2 unit

Product image 1

PureT (UV2-LAMP) Replacement Lamp for UV-2 unit

The PureT UV2-LAMP is a direct replacement ultraviolet lamp engineered specifically for the UV-2 disinfection system. This genuine PureT component restores your UV unit to full germicidal output, ensuring continuous protection against bacteria, viruses, and other microorganisms in your water supply.
SPECIFICATIONS

UV2-LAMP Technical Details

Manufacturer PureT
Model Number UV2-LAMP
Compatible Unit UV-2 UV Disinfection System
Lamp Type Low-pressure Mercury UV Germicidal
Primary Wavelength 254 nanometers
Recommended Replacement Every 12 months (9,000 hours)
Product Category UV Lamp Replacement
INSTALLATION & USE

Lamp Replacement Procedure

  1. Disconnect power to the UV-2 unit and shut off water supply to allow the lamp chamber to cool for at least 15 minutes before proceeding.
  2. Unscrew the chamber housing or release the lamp retention mechanism according to your UV-2 unit's design, then carefully remove the old UV2-LAMP.
  3. Insert the new UV2-LAMP without touching the quartz glass surface (use a clean cloth or gloves), secure the retention mechanism, and reassemble the chamber.
  4. Restore water flow and power to the unit, then verify the lamp indicator light confirms proper operation.
COMPATIBILITY

System Requirements

This UV2-LAMP is manufactured exclusively for the PureT UV-2 ultraviolet water disinfection system. Using genuine PureT replacement lamps ensures proper fit, optimal UV output at 254nm germicidal wavelength, and maintains warranty compliance. Third-party or generic UV lamps may not deliver the rated disinfection performance and can void your system warranty. Annual lamp replacement is essential because UV output degrades over time even when the lamp appears to be functioning normally.

🔧 Pro tip: Mark your calendar for lamp replacement every 12 months from installation date, not when the lamp burns out. UV germicidal effectiveness drops significantly after 9,000 operational hours even though the lamp still produces visible light, leaving your water inadequately disinfected.
The PureT UV2-LAMP is a direct replacement ultraviolet lamp engineered specifically for the UV-2 disinfection system. This genuine PureT component restores your UV unit to full germicidal output, ensuring continuous protection against bacteria, viruses, and other microorganisms in your water supply.
SPECIFICATIONS

UV2-LAMP Technical Details

Manufacturer PureT
Model Number UV2-LAMP
Compatible Unit UV-2 UV Disinfection System
Lamp Type Low-pressure Mercury UV Germicidal
Primary Wavelength 254 nanometers
Recommended Replacement Every 12 months (9,000 hours)
Product Category UV Lamp Replacement
INSTALLATION & USE

Lamp Replacement Procedure

  1. Disconnect power to the UV-2 unit and shut off water supply to allow the lamp chamber to cool for at least 15 minutes before proceeding.
  2. Unscrew the chamber housing or release the lamp retention mechanism according to your UV-2 unit's design, then carefully remove the old UV2-LAMP.
  3. Insert the new UV2-LAMP without touching the quartz glass surface (use a clean cloth or gloves), secure the retention mechanism, and reassemble the chamber.
  4. Restore water flow and power to the unit, then verify the lamp indicator light confirms proper operation.
COMPATIBILITY

System Requirements

This UV2-LAMP is manufactured exclusively for the PureT UV-2 ultraviolet water disinfection system. Using genuine PureT replacement lamps ensures proper fit, optimal UV output at 254nm germicidal wavelength, and maintains warranty compliance. Third-party or generic UV lamps may not deliver the rated disinfection performance and can void your system warranty. Annual lamp replacement is essential because UV output degrades over time even when the lamp appears to be functioning normally.

🔧 Pro tip: Mark your calendar for lamp replacement every 12 months from installation date, not when the lamp burns out. UV germicidal effectiveness drops significantly after 9,000 operational hours even though the lamp still produces visible light, leaving your water inadequately disinfected.
$14.32

Original: $40.92

-65%
PureT (UV2-LAMP) Replacement Lamp for UV-2 unit—

$40.92

$14.32

Description

The PureT UV2-LAMP is a direct replacement ultraviolet lamp engineered specifically for the UV-2 disinfection system. This genuine PureT component restores your UV unit to full germicidal output, ensuring continuous protection against bacteria, viruses, and other microorganisms in your water supply.
SPECIFICATIONS

UV2-LAMP Technical Details

Manufacturer PureT
Model Number UV2-LAMP
Compatible Unit UV-2 UV Disinfection System
Lamp Type Low-pressure Mercury UV Germicidal
Primary Wavelength 254 nanometers
Recommended Replacement Every 12 months (9,000 hours)
Product Category UV Lamp Replacement
INSTALLATION & USE

Lamp Replacement Procedure

  1. Disconnect power to the UV-2 unit and shut off water supply to allow the lamp chamber to cool for at least 15 minutes before proceeding.
  2. Unscrew the chamber housing or release the lamp retention mechanism according to your UV-2 unit's design, then carefully remove the old UV2-LAMP.
  3. Insert the new UV2-LAMP without touching the quartz glass surface (use a clean cloth or gloves), secure the retention mechanism, and reassemble the chamber.
  4. Restore water flow and power to the unit, then verify the lamp indicator light confirms proper operation.
COMPATIBILITY

System Requirements

This UV2-LAMP is manufactured exclusively for the PureT UV-2 ultraviolet water disinfection system. Using genuine PureT replacement lamps ensures proper fit, optimal UV output at 254nm germicidal wavelength, and maintains warranty compliance. Third-party or generic UV lamps may not deliver the rated disinfection performance and can void your system warranty. Annual lamp replacement is essential because UV output degrades over time even when the lamp appears to be functioning normally.

🔧 Pro tip: Mark your calendar for lamp replacement every 12 months from installation date, not when the lamp burns out. UV germicidal effectiveness drops significantly after 9,000 operational hours even though the lamp still produces visible light, leaving your water inadequately disinfected.
PureT (UV2-LAMP) Replacement Lamp for UV-2 unit | Isopure Water