SUEZ AG4040TM; 4" x 40" 2300 GPD TFC Replacement Reverse Osmosis Membrane - Tap/Brackish Water (Veolia)
AG4040TM 4" x 40" High Rejection Brackish Water Membrane
The SUEZ AG4040TM (formerly GE Desal) represents a proven standard in commercial brackish water treatment, delivering 2,300 gallons per day with an average 99.5% sodium chloride rejection at just 200 psig. Designed with 28 mil feed spacers and male end connections, this element balances high rejection performance with moderate energy consumption for municipal tap and brackish source water applications.
AG-Series High Rejection Performance
Proprietary TFM Technology
Thin Film Membrane construction delivers consistent high flux and superior rejection across a wide operating pH range of 4.0 to 11.0
Low Pressure Operation
Achieves rated performance at 200 psig typical operating pressure, reducing energy costs while maintaining 99.5% average rejection
Commercial Flow Capacity
2,300 GPD rated capacity with 85 ft² of active membrane area, ideal for mid-sized commercial brackish water and tap water systems
Robust Design Parameters
Tape outer wrap with 28 mil feed spacers, male end connections, maximum 450 psig pressure rating, and 122°F temperature tolerance
Wide pH Tolerance
Operating range of pH 4.0-11.0 with cleaning range of 2.0-11.5, optimized for pH 7.0-7.5 for maximum salt rejection performance
Industry Standard Reliability
Proven AG-Series design considered a benchmark in brackish water treatment, with typical operating flux of 10-20 GFD
Performance & Operating Parameters
| Model Number | AG4040TM (Part# 3032514, 3032513) |
| Dimensions | 4 inches x 40 inches |
| Rated Flow | 2,300 GPD (2,400 GPD nominal) |
| Active Membrane Area | 85 ft² |
| Average Salt Rejection | 99.5% (99% minimum) |
| Test Conditions | 2000 mg/L NaCl, 225 psig, 77°F, 15% recovery, pH 7.5 |
| Typical Operating Pressure | 200 psig |
| Maximum Pressure | 450 psig |
| Maximum Temperature | 122°F (50°C) |
| Operating pH Range | 4.0 - 11.0 (optimum 7.0-7.5) |
| Cleaning pH Range | 2.0 - 11.5 |
| Feed Spacer | 28 mil |
| Outer Wrap | Tape construction |
| End Connections | Male (both ends) |
| Max Pressure Drop | 10 psig per element / 50 psig per vessel |
| Feed Water Requirements | NTU <1, SDI <3 |
| Chlorine Tolerance | 1,000 ppm-hours (dechlorination recommended) |
| Typical Operating Flux | 10-20 GFD (15-35 L·H⁻¹·M⁻²) |
Commercial Brackish & Tap Water Systems
The SUEZ AG4040TM membrane is designed for commercial reverse osmosis systems processing brackish groundwater, municipal tap water, and moderately saline source water up to 2,000 mg/L TDS. This element replaces GE Desal part numbers 1206774 and AG4040TF in existing 4-inch commercial RO vessels. Compatible with standard 4" x 40" membrane housings featuring male BSPT or NPT connections. Suitable for applications requiring high rejection performance at moderate
AG4040TM 4" x 40" High Rejection Brackish Water Membrane
The SUEZ AG4040TM (formerly GE Desal) represents a proven standard in commercial brackish water treatment, delivering 2,300 gallons per day with an average 99.5% sodium chloride rejection at just 200 psig. Designed with 28 mil feed spacers and male end connections, this element balances high rejection performance with moderate energy consumption for municipal tap and brackish source water applications.
AG-Series High Rejection Performance
Proprietary TFM Technology
Thin Film Membrane construction delivers consistent high flux and superior rejection across a wide operating pH range of 4.0 to 11.0
Low Pressure Operation
Achieves rated performance at 200 psig typical operating pressure, reducing energy costs while maintaining 99.5% average rejection
Commercial Flow Capacity
2,300 GPD rated capacity with 85 ft² of active membrane area, ideal for mid-sized commercial brackish water and tap water systems
Robust Design Parameters
Tape outer wrap with 28 mil feed spacers, male end connections, maximum 450 psig pressure rating, and 122°F temperature tolerance
Wide pH Tolerance
Operating range of pH 4.0-11.0 with cleaning range of 2.0-11.5, optimized for pH 7.0-7.5 for maximum salt rejection performance
Industry Standard Reliability
Proven AG-Series design considered a benchmark in brackish water treatment, with typical operating flux of 10-20 GFD
Performance & Operating Parameters
| Model Number | AG4040TM (Part# 3032514, 3032513) |
| Dimensions | 4 inches x 40 inches |
| Rated Flow | 2,300 GPD (2,400 GPD nominal) |
| Active Membrane Area | 85 ft² |
| Average Salt Rejection | 99.5% (99% minimum) |
| Test Conditions | 2000 mg/L NaCl, 225 psig, 77°F, 15% recovery, pH 7.5 |
| Typical Operating Pressure | 200 psig |
| Maximum Pressure | 450 psig |
| Maximum Temperature | 122°F (50°C) |
| Operating pH Range | 4.0 - 11.0 (optimum 7.0-7.5) |
| Cleaning pH Range | 2.0 - 11.5 |
| Feed Spacer | 28 mil |
| Outer Wrap | Tape construction |
| End Connections | Male (both ends) |
| Max Pressure Drop | 10 psig per element / 50 psig per vessel |
| Feed Water Requirements | NTU <1, SDI <3 |
| Chlorine Tolerance | 1,000 ppm-hours (dechlorination recommended) |
| Typical Operating Flux | 10-20 GFD (15-35 L·H⁻¹·M⁻²) |
Commercial Brackish & Tap Water Systems
The SUEZ AG4040TM membrane is designed for commercial reverse osmosis systems processing brackish groundwater, municipal tap water, and moderately saline source water up to 2,000 mg/L TDS. This element replaces GE Desal part numbers 1206774 and AG4040TF in existing 4-inch commercial RO vessels. Compatible with standard 4" x 40" membrane housings featuring male BSPT or NPT connections. Suitable for applications requiring high rejection performance at moderate
Original: $379.52
-65%$379.52
$132.83Description
AG4040TM 4" x 40" High Rejection Brackish Water Membrane
The SUEZ AG4040TM (formerly GE Desal) represents a proven standard in commercial brackish water treatment, delivering 2,300 gallons per day with an average 99.5% sodium chloride rejection at just 200 psig. Designed with 28 mil feed spacers and male end connections, this element balances high rejection performance with moderate energy consumption for municipal tap and brackish source water applications.
AG-Series High Rejection Performance
Proprietary TFM Technology
Thin Film Membrane construction delivers consistent high flux and superior rejection across a wide operating pH range of 4.0 to 11.0
Low Pressure Operation
Achieves rated performance at 200 psig typical operating pressure, reducing energy costs while maintaining 99.5% average rejection
Commercial Flow Capacity
2,300 GPD rated capacity with 85 ft² of active membrane area, ideal for mid-sized commercial brackish water and tap water systems
Robust Design Parameters
Tape outer wrap with 28 mil feed spacers, male end connections, maximum 450 psig pressure rating, and 122°F temperature tolerance
Wide pH Tolerance
Operating range of pH 4.0-11.0 with cleaning range of 2.0-11.5, optimized for pH 7.0-7.5 for maximum salt rejection performance
Industry Standard Reliability
Proven AG-Series design considered a benchmark in brackish water treatment, with typical operating flux of 10-20 GFD
Performance & Operating Parameters
| Model Number | AG4040TM (Part# 3032514, 3032513) |
| Dimensions | 4 inches x 40 inches |
| Rated Flow | 2,300 GPD (2,400 GPD nominal) |
| Active Membrane Area | 85 ft² |
| Average Salt Rejection | 99.5% (99% minimum) |
| Test Conditions | 2000 mg/L NaCl, 225 psig, 77°F, 15% recovery, pH 7.5 |
| Typical Operating Pressure | 200 psig |
| Maximum Pressure | 450 psig |
| Maximum Temperature | 122°F (50°C) |
| Operating pH Range | 4.0 - 11.0 (optimum 7.0-7.5) |
| Cleaning pH Range | 2.0 - 11.5 |
| Feed Spacer | 28 mil |
| Outer Wrap | Tape construction |
| End Connections | Male (both ends) |
| Max Pressure Drop | 10 psig per element / 50 psig per vessel |
| Feed Water Requirements | NTU <1, SDI <3 |
| Chlorine Tolerance | 1,000 ppm-hours (dechlorination recommended) |
| Typical Operating Flux | 10-20 GFD (15-35 L·H⁻¹·M⁻²) |
Commercial Brackish & Tap Water Systems
The SUEZ AG4040TM membrane is designed for commercial reverse osmosis systems processing brackish groundwater, municipal tap water, and moderately saline source water up to 2,000 mg/L TDS. This element replaces GE Desal part numbers 1206774 and AG4040TF in existing 4-inch commercial RO vessels. Compatible with standard 4" x 40" membrane housings featuring male BSPT or NPT connections. Suitable for applications requiring high rejection performance at moderate
