TGI Pure (VV-WWC-14) Feed Water Adapter Chrome 1-2" FNPT x 1-2" MNPT x 1-4" FNPT
Technical Details
| Model Number | VV-WWC-14 |
| Manufacturer | Watts (TGI Pure) |
| Material | Chrome-plated brass |
| Inlet Connection | 1/2" Female NPT |
| Outlet Connection | 1/2" Male NPT |
| Feed Connection | 1/4" Female NPT |
| Application | RO systems, carbon filtration, UV sterilization |
| Compatible With | Watts VV-TKB14 and standard 1/4" tubing connections |
How to Install the VV-WWC-14 Feed Adapter
- Shut off the cold water supply and drain the line. Thread the 1/2" MNPT end into your existing cold water supply line using thread sealant or PTFE tape.
- Connect your fixture or appliance to the 1/2" FNPT outlet on the opposite end, maintaining inline flow through the adapter.
- Thread your 1/4" feed water valve or compression fitting (such as the Watts VV-TKB14) into the side 1/4" FNPT port for your RO system or filter connection.
- Restore water pressure slowly and inspect all three connection points for leaks. Tighten connections as needed, but avoid overtightening chrome fittings.
Works With Your System
The VV-WWC-14 chrome feed adapter is designed for use with residential and light commercial reverse osmosis systems, under-sink carbon filtration units, and UV sterilization equipment requiring a 1/4" feed water connection. It pairs directly with the Watts VV-TKB14 ball valve and works with any system using standard 1/4" OD tubing. Ideal for installations where copper saddle valves are not preferred or where local codes require inline tee connections instead of piercing-style fittings.
Technical Details
| Model Number | VV-WWC-14 |
| Manufacturer | Watts (TGI Pure) |
| Material | Chrome-plated brass |
| Inlet Connection | 1/2" Female NPT |
| Outlet Connection | 1/2" Male NPT |
| Feed Connection | 1/4" Female NPT |
| Application | RO systems, carbon filtration, UV sterilization |
| Compatible With | Watts VV-TKB14 and standard 1/4" tubing connections |
How to Install the VV-WWC-14 Feed Adapter
- Shut off the cold water supply and drain the line. Thread the 1/2" MNPT end into your existing cold water supply line using thread sealant or PTFE tape.
- Connect your fixture or appliance to the 1/2" FNPT outlet on the opposite end, maintaining inline flow through the adapter.
- Thread your 1/4" feed water valve or compression fitting (such as the Watts VV-TKB14) into the side 1/4" FNPT port for your RO system or filter connection.
- Restore water pressure slowly and inspect all three connection points for leaks. Tighten connections as needed, but avoid overtightening chrome fittings.
Works With Your System
The VV-WWC-14 chrome feed adapter is designed for use with residential and light commercial reverse osmosis systems, under-sink carbon filtration units, and UV sterilization equipment requiring a 1/4" feed water connection. It pairs directly with the Watts VV-TKB14 ball valve and works with any system using standard 1/4" OD tubing. Ideal for installations where copper saddle valves are not preferred or where local codes require inline tee connections instead of piercing-style fittings.
Description
Technical Details
| Model Number | VV-WWC-14 |
| Manufacturer | Watts (TGI Pure) |
| Material | Chrome-plated brass |
| Inlet Connection | 1/2" Female NPT |
| Outlet Connection | 1/2" Male NPT |
| Feed Connection | 1/4" Female NPT |
| Application | RO systems, carbon filtration, UV sterilization |
| Compatible With | Watts VV-TKB14 and standard 1/4" tubing connections |
How to Install the VV-WWC-14 Feed Adapter
- Shut off the cold water supply and drain the line. Thread the 1/2" MNPT end into your existing cold water supply line using thread sealant or PTFE tape.
- Connect your fixture or appliance to the 1/2" FNPT outlet on the opposite end, maintaining inline flow through the adapter.
- Thread your 1/4" feed water valve or compression fitting (such as the Watts VV-TKB14) into the side 1/4" FNPT port for your RO system or filter connection.
- Restore water pressure slowly and inspect all three connection points for leaks. Tighten connections as needed, but avoid overtightening chrome fittings.
Works With Your System
The VV-WWC-14 chrome feed adapter is designed for use with residential and light commercial reverse osmosis systems, under-sink carbon filtration units, and UV sterilization equipment requiring a 1/4" feed water connection. It pairs directly with the Watts VV-TKB14 ball valve and works with any system using standard 1/4" OD tubing. Ideal for installations where copper saddle valves are not preferred or where local codes require inline tee connections instead of piercing-style fittings.
