Valuetrex (VX-TW30) Thin Film Composite Replacement Reverse Osmosis Membrane
The Valuetrex VX-TW30 delivers reliable thin film composite reverse osmosis filtration at a price point that makes membrane replacement practical for residential systems. This standard-dimension membrane fits most conventional RO housings and provides 2-5 years of consistent performance between changes.
SPECIFICATIONS
Valuetrex VX-TW30 Technical Details
| Model Number | VX-TW30 |
| Membrane Type | Thin Film Composite (TFC) |
| Dimensions | 1.8" diameter × 11.75" length |
| Weight | 10 oz |
| Operating Pressure | 40-100 psi |
| Operating Temperature | 40-100°F |
| Service Life | 2-5 years (depending on source water quality) |
| Application | Residential reverse osmosis systems |
INSTALLATION & USE
Membrane Replacement Procedure
- Shut off water supply and depressurize the system by opening the RO faucet
- Remove the membrane housing cap, pull out the old membrane, and inspect the housing for debris or buildup
- Insert the new VX-TW30 membrane into the housing with the rubber seal end first, ensuring it seats fully
- Reinstall the housing cap, turn on water supply, and flush the system for 30-45 minutes before use
- Check for leaks at all connection points and monitor initial water quality over the first 24 hours
COMPATIBILITY
System Fitment
The Valuetrex VX-TW30 membrane fits most standard residential reverse osmosis systems with conventional 1.8" × 12" membrane housings. This includes systems from major manufacturers using the industry-standard housing dimension. Verify your existing membrane dimensions before ordering to ensure proper fitment.
🔧 Pro tip: If your RO system is producing water slower than usual but the membrane isn't due for replacement, check your prefilters first. A clogged sediment or carbon filter will starve the membrane of adequate feed pressure and reduce output dramatically.
The Valuetrex VX-TW30 delivers reliable thin film composite reverse osmosis filtration at a price point that makes membrane replacement practical for residential systems. This standard-dimension membrane fits most conventional RO housings and provides 2-5 years of consistent performance between changes.
SPECIFICATIONS
Valuetrex VX-TW30 Technical Details
| Model Number | VX-TW30 |
| Membrane Type | Thin Film Composite (TFC) |
| Dimensions | 1.8" diameter × 11.75" length |
| Weight | 10 oz |
| Operating Pressure | 40-100 psi |
| Operating Temperature | 40-100°F |
| Service Life | 2-5 years (depending on source water quality) |
| Application | Residential reverse osmosis systems |
INSTALLATION & USE
Membrane Replacement Procedure
- Shut off water supply and depressurize the system by opening the RO faucet
- Remove the membrane housing cap, pull out the old membrane, and inspect the housing for debris or buildup
- Insert the new VX-TW30 membrane into the housing with the rubber seal end first, ensuring it seats fully
- Reinstall the housing cap, turn on water supply, and flush the system for 30-45 minutes before use
- Check for leaks at all connection points and monitor initial water quality over the first 24 hours
COMPATIBILITY
System Fitment
The Valuetrex VX-TW30 membrane fits most standard residential reverse osmosis systems with conventional 1.8" × 12" membrane housings. This includes systems from major manufacturers using the industry-standard housing dimension. Verify your existing membrane dimensions before ordering to ensure proper fitment.
🔧 Pro tip: If your RO system is producing water slower than usual but the membrane isn't due for replacement, check your prefilters first. A clogged sediment or carbon filter will starve the membrane of adequate feed pressure and reduce output dramatically.
Select Production Rate
From $56.54
Valuetrex (VX-TW30) Thin Film Composite Replacement Reverse Osmosis Membrane—
$56.54
Description
The Valuetrex VX-TW30 delivers reliable thin film composite reverse osmosis filtration at a price point that makes membrane replacement practical for residential systems. This standard-dimension membrane fits most conventional RO housings and provides 2-5 years of consistent performance between changes.
SPECIFICATIONS
Valuetrex VX-TW30 Technical Details
| Model Number | VX-TW30 |
| Membrane Type | Thin Film Composite (TFC) |
| Dimensions | 1.8" diameter × 11.75" length |
| Weight | 10 oz |
| Operating Pressure | 40-100 psi |
| Operating Temperature | 40-100°F |
| Service Life | 2-5 years (depending on source water quality) |
| Application | Residential reverse osmosis systems |
INSTALLATION & USE
Membrane Replacement Procedure
- Shut off water supply and depressurize the system by opening the RO faucet
- Remove the membrane housing cap, pull out the old membrane, and inspect the housing for debris or buildup
- Insert the new VX-TW30 membrane into the housing with the rubber seal end first, ensuring it seats fully
- Reinstall the housing cap, turn on water supply, and flush the system for 30-45 minutes before use
- Check for leaks at all connection points and monitor initial water quality over the first 24 hours
COMPATIBILITY
System Fitment
The Valuetrex VX-TW30 membrane fits most standard residential reverse osmosis systems with conventional 1.8" × 12" membrane housings. This includes systems from major manufacturers using the industry-standard housing dimension. Verify your existing membrane dimensions before ordering to ensure proper fitment.
🔧 Pro tip: If your RO system is producing water slower than usual but the membrane isn't due for replacement, check your prefilters first. A clogged sediment or carbon filter will starve the membrane of adequate feed pressure and reduce output dramatically.
