HomeStore

Viqua (BA-RO-P-12) Replacement Ballast for UV Systems, 12VDC

Product image 1

Viqua (BA-RO-P-12) Replacement Ballast for UV Systems, 12VDC

The Viqua BA-RO-P-12 replacement ballast is a direct-fit controller for all 12VDC Viqua UV systems, ensuring reliable ultraviolet disinfection performance. Designed for non-audible operation, this ballast restores proper power delivery to your S1Q-P, S2Q-P, or S5Q-P UV purification units.
SPECIFICATIONS

Technical Details

Part Number BA-RO-P-12
Voltage 12VDC
Component Type UV System Ballast Controller
Operation Mode Non-audible
Manufacturer Viqua
Application Point-of-use UV disinfection systems
Compatible Models All Viqua /12VDC series units
INSTALLATION & USE

Ballast Replacement Process

  1. Disconnect power to the UV system and verify zero voltage before beginning work
  2. Remove the existing ballast housing and disconnect all wiring harnesses from the lamp and power supply
  3. Install the BA-RO-P-12 ballast, reconnect all wiring per the included diagram, and secure the housing
  4. Restore power and verify the UV lamp ignites and the system operates without audible hum or flicker
COMPATIBILITY

System Compatibility

The Viqua BA-RO-P-12 ballast is compatible with all Viqua 12VDC UV systems, including the S1Q-P/12VDC, S2Q-P/12VDC, and S5Q-P/12VDC models. This universal 12VDC ballast works with any Viqua UV unit designated with the /12VDC suffix, making it the correct replacement controller for off-grid, RV, marine, and solar-powered water disinfection applications.

🔧 Pro Tip: When replacing a ballast, inspect the lamp and quartz sleeve for scaling or fouling. A failing ballast is often the result of prolonged overwork caused by dirty components that block UV transmission, so cleaning or replacing these parts during ballast service extends system life.
The Viqua BA-RO-P-12 replacement ballast is a direct-fit controller for all 12VDC Viqua UV systems, ensuring reliable ultraviolet disinfection performance. Designed for non-audible operation, this ballast restores proper power delivery to your S1Q-P, S2Q-P, or S5Q-P UV purification units.
SPECIFICATIONS

Technical Details

Part Number BA-RO-P-12
Voltage 12VDC
Component Type UV System Ballast Controller
Operation Mode Non-audible
Manufacturer Viqua
Application Point-of-use UV disinfection systems
Compatible Models All Viqua /12VDC series units
INSTALLATION & USE

Ballast Replacement Process

  1. Disconnect power to the UV system and verify zero voltage before beginning work
  2. Remove the existing ballast housing and disconnect all wiring harnesses from the lamp and power supply
  3. Install the BA-RO-P-12 ballast, reconnect all wiring per the included diagram, and secure the housing
  4. Restore power and verify the UV lamp ignites and the system operates without audible hum or flicker
COMPATIBILITY

System Compatibility

The Viqua BA-RO-P-12 ballast is compatible with all Viqua 12VDC UV systems, including the S1Q-P/12VDC, S2Q-P/12VDC, and S5Q-P/12VDC models. This universal 12VDC ballast works with any Viqua UV unit designated with the /12VDC suffix, making it the correct replacement controller for off-grid, RV, marine, and solar-powered water disinfection applications.

🔧 Pro Tip: When replacing a ballast, inspect the lamp and quartz sleeve for scaling or fouling. A failing ballast is often the result of prolonged overwork caused by dirty components that block UV transmission, so cleaning or replacing these parts during ballast service extends system life.
$299.00
Viqua (BA-RO-P-12) Replacement Ballast for UV Systems, 12VDC—
$299.00

Description

The Viqua BA-RO-P-12 replacement ballast is a direct-fit controller for all 12VDC Viqua UV systems, ensuring reliable ultraviolet disinfection performance. Designed for non-audible operation, this ballast restores proper power delivery to your S1Q-P, S2Q-P, or S5Q-P UV purification units.
SPECIFICATIONS

Technical Details

Part Number BA-RO-P-12
Voltage 12VDC
Component Type UV System Ballast Controller
Operation Mode Non-audible
Manufacturer Viqua
Application Point-of-use UV disinfection systems
Compatible Models All Viqua /12VDC series units
INSTALLATION & USE

Ballast Replacement Process

  1. Disconnect power to the UV system and verify zero voltage before beginning work
  2. Remove the existing ballast housing and disconnect all wiring harnesses from the lamp and power supply
  3. Install the BA-RO-P-12 ballast, reconnect all wiring per the included diagram, and secure the housing
  4. Restore power and verify the UV lamp ignites and the system operates without audible hum or flicker
COMPATIBILITY

System Compatibility

The Viqua BA-RO-P-12 ballast is compatible with all Viqua 12VDC UV systems, including the S1Q-P/12VDC, S2Q-P/12VDC, and S5Q-P/12VDC models. This universal 12VDC ballast works with any Viqua UV unit designated with the /12VDC suffix, making it the correct replacement controller for off-grid, RV, marine, and solar-powered water disinfection applications.

🔧 Pro Tip: When replacing a ballast, inspect the lamp and quartz sleeve for scaling or fouling. A failing ballast is often the result of prolonged overwork caused by dirty components that block UV transmission, so cleaning or replacing these parts during ballast service extends system life.
Viqua (BA-RO-P-12) Replacement Ballast for UV Systems, 12VDC | Isopure Water