Clack FRP Fiberglass Composite Mineral Tank
Clack FRP Mineral Tank Technical Details
| Material | Fiberglass Reinforced Plastic (FRP) |
| Construction | Filament-wound composite with polyethylene liner |
| Maximum Operating Pressure | 125 PSI |
| Temperature Range | 40°F to 120°F |
| Manufacturer | Clack Corporation |
| Application | Water softener mineral bed containment |
| Connection Type | Standard threaded top opening |
| Corrosion Resistance | Complete resistance to rust and corrosion |
Installing Your Clack Mineral Tank
- Position tank on level surface with adequate clearance for control valve and plumbing connections. Ensure floor can support combined weight of tank, resin media, and water during operation.
- Fill tank with appropriate softening resin to manufacturer's recommended volume, typically 60-70% of total tank capacity. Use funnel to prevent media spillage.
- Install distributor tube assembly with proper basket and upper screen, ensuring tube reaches within 3-4 inches of tank bottom for optimal backwash distribution.
- Thread control valve onto tank opening using Teflon tape or pipe dope on male threads. Torque to manufacturer specifications to create watertight seal without cracking composite material.
- Connect inlet and outlet plumbing, then slowly pressurize system while checking all connections for leaks before placing unit into service.
System Compatibility
This Clack FRP mineral tank accepts all standard water softener control valves with compatible thread sizes, including Clack WS1, WS2, Fleck 5600, Fleck 7000, and Autotrol valve systems. Compatible with cation exchange resin media for residential and commercial softening applications. The fiberglass composite construction makes this tank ideal for installations where steel tanks would face premature corrosion from humid environments, coastal air, or aggressive water chemistry.
Clack FRP Mineral Tank Technical Details
| Material | Fiberglass Reinforced Plastic (FRP) |
| Construction | Filament-wound composite with polyethylene liner |
| Maximum Operating Pressure | 125 PSI |
| Temperature Range | 40°F to 120°F |
| Manufacturer | Clack Corporation |
| Application | Water softener mineral bed containment |
| Connection Type | Standard threaded top opening |
| Corrosion Resistance | Complete resistance to rust and corrosion |
Installing Your Clack Mineral Tank
- Position tank on level surface with adequate clearance for control valve and plumbing connections. Ensure floor can support combined weight of tank, resin media, and water during operation.
- Fill tank with appropriate softening resin to manufacturer's recommended volume, typically 60-70% of total tank capacity. Use funnel to prevent media spillage.
- Install distributor tube assembly with proper basket and upper screen, ensuring tube reaches within 3-4 inches of tank bottom for optimal backwash distribution.
- Thread control valve onto tank opening using Teflon tape or pipe dope on male threads. Torque to manufacturer specifications to create watertight seal without cracking composite material.
- Connect inlet and outlet plumbing, then slowly pressurize system while checking all connections for leaks before placing unit into service.
System Compatibility
This Clack FRP mineral tank accepts all standard water softener control valves with compatible thread sizes, including Clack WS1, WS2, Fleck 5600, Fleck 7000, and Autotrol valve systems. Compatible with cation exchange resin media for residential and commercial softening applications. The fiberglass composite construction makes this tank ideal for installations where steel tanks would face premature corrosion from humid environments, coastal air, or aggressive water chemistry.
Original: $225.00
-65%$225.00
$78.75Description
Clack FRP Mineral Tank Technical Details
| Material | Fiberglass Reinforced Plastic (FRP) |
| Construction | Filament-wound composite with polyethylene liner |
| Maximum Operating Pressure | 125 PSI |
| Temperature Range | 40°F to 120°F |
| Manufacturer | Clack Corporation |
| Application | Water softener mineral bed containment |
| Connection Type | Standard threaded top opening |
| Corrosion Resistance | Complete resistance to rust and corrosion |
Installing Your Clack Mineral Tank
- Position tank on level surface with adequate clearance for control valve and plumbing connections. Ensure floor can support combined weight of tank, resin media, and water during operation.
- Fill tank with appropriate softening resin to manufacturer's recommended volume, typically 60-70% of total tank capacity. Use funnel to prevent media spillage.
- Install distributor tube assembly with proper basket and upper screen, ensuring tube reaches within 3-4 inches of tank bottom for optimal backwash distribution.
- Thread control valve onto tank opening using Teflon tape or pipe dope on male threads. Torque to manufacturer specifications to create watertight seal without cracking composite material.
- Connect inlet and outlet plumbing, then slowly pressurize system while checking all connections for leaks before placing unit into service.
System Compatibility
This Clack FRP mineral tank accepts all standard water softener control valves with compatible thread sizes, including Clack WS1, WS2, Fleck 5600, Fleck 7000, and Autotrol valve systems. Compatible with cation exchange resin media for residential and commercial softening applications. The fiberglass composite construction makes this tank ideal for installations where steel tanks would face premature corrosion from humid environments, coastal air, or aggressive water chemistry.
