Clack (V3010-15G)-C-Series Injector, Green, 21" Downflow/30" Upflow Tank
Technical Details
| Manufacturer | Clack Corporation |
| Model Number | V3010-15G |
| Injector Series | C-Series |
| Color Code | Green |
| Tank Compatibility (Downflow) | 21 inches |
| Tank Compatibility (Upflow) | 30 inches |
| Application | Water softener regeneration |
| Material | Chemical-resistant polymer |
Replacement Procedure
- Shut off water supply and depressurize the system before removing the valve body cover or injector cap assembly.
- Remove the existing injector by unscrewing the injector cap counterclockwise and carefully extracting the old component with needle-nose pliers if necessary.
- Insert the new V3010-15G green injector into the injector throat, ensuring proper seating and alignment with the venturi screen.
- Reinstall the injector cap assembly hand-tight, then initiate a manual regeneration cycle to verify proper brine draw and flow rates.
System Requirements
This green injector is designed specifically for Clack WS1, WS1.25, and WS1.5 control valves paired with 21-inch downflow or 30-inch upflow mineral tanks. Injector color coding corresponds to tank size and service flow requirements—using the incorrect injector size will result in incomplete regeneration or excessive water consumption. Always verify tank dimensions and valve model before ordering replacement injectors, as Clack C-Series injectors are not interchangeable across different tank configurations.
Technical Details
| Manufacturer | Clack Corporation |
| Model Number | V3010-15G |
| Injector Series | C-Series |
| Color Code | Green |
| Tank Compatibility (Downflow) | 21 inches |
| Tank Compatibility (Upflow) | 30 inches |
| Application | Water softener regeneration |
| Material | Chemical-resistant polymer |
Replacement Procedure
- Shut off water supply and depressurize the system before removing the valve body cover or injector cap assembly.
- Remove the existing injector by unscrewing the injector cap counterclockwise and carefully extracting the old component with needle-nose pliers if necessary.
- Insert the new V3010-15G green injector into the injector throat, ensuring proper seating and alignment with the venturi screen.
- Reinstall the injector cap assembly hand-tight, then initiate a manual regeneration cycle to verify proper brine draw and flow rates.
System Requirements
This green injector is designed specifically for Clack WS1, WS1.25, and WS1.5 control valves paired with 21-inch downflow or 30-inch upflow mineral tanks. Injector color coding corresponds to tank size and service flow requirements—using the incorrect injector size will result in incomplete regeneration or excessive water consumption. Always verify tank dimensions and valve model before ordering replacement injectors, as Clack C-Series injectors are not interchangeable across different tank configurations.
Description
Technical Details
| Manufacturer | Clack Corporation |
| Model Number | V3010-15G |
| Injector Series | C-Series |
| Color Code | Green |
| Tank Compatibility (Downflow) | 21 inches |
| Tank Compatibility (Upflow) | 30 inches |
| Application | Water softener regeneration |
| Material | Chemical-resistant polymer |
Replacement Procedure
- Shut off water supply and depressurize the system before removing the valve body cover or injector cap assembly.
- Remove the existing injector by unscrewing the injector cap counterclockwise and carefully extracting the old component with needle-nose pliers if necessary.
- Insert the new V3010-15G green injector into the injector throat, ensuring proper seating and alignment with the venturi screen.
- Reinstall the injector cap assembly hand-tight, then initiate a manual regeneration cycle to verify proper brine draw and flow rates.
System Requirements
This green injector is designed specifically for Clack WS1, WS1.25, and WS1.5 control valves paired with 21-inch downflow or 30-inch upflow mineral tanks. Injector color coding corresponds to tank size and service flow requirements—using the incorrect injector size will result in incomplete regeneration or excessive water consumption. Always verify tank dimensions and valve model before ordering replacement injectors, as Clack C-Series injectors are not interchangeable across different tank configurations.
