Clack (V3010-1I)-Injector-I Orange-16" Down,21" Up
Clack V3010-1I Injector Assembly
Venturi Brining Process
Pressure Differential
High-velocity water flow through the injector throat creates negative pressure that pulls brine solution from the salt tank into the control valve body
Resin Regeneration
Brine mixture flows through the softener resin bed, exchanging sodium ions for captured hardness minerals and restoring the resin's exchange capacity
Flush Cycle
Fresh water rinses away spent brine and displaced minerals, preparing the system to return to service mode with fully regenerated resin media
Tank & Valve Specifications
The Clack V3010-1I orange injector fits all 1 inch and 1.25 inch Clack control valves including WS1, WS1.25, and WS1.5 models. Use with 16 inch diameter mineral tanks when configured for downflow brining, or with 21 inch diameter tanks when using upflow brining. Injector sizing is critical to proper brine draw and regeneration efficiency, so verify your tank diameter and brining direction before ordering. This is a genuine Clack replacement part with the correct orifice sizing for the I Orange flow classification.
Clack V3010-1I Injector Assembly
Venturi Brining Process
Pressure Differential
High-velocity water flow through the injector throat creates negative pressure that pulls brine solution from the salt tank into the control valve body
Resin Regeneration
Brine mixture flows through the softener resin bed, exchanging sodium ions for captured hardness minerals and restoring the resin's exchange capacity
Flush Cycle
Fresh water rinses away spent brine and displaced minerals, preparing the system to return to service mode with fully regenerated resin media
Tank & Valve Specifications
The Clack V3010-1I orange injector fits all 1 inch and 1.25 inch Clack control valves including WS1, WS1.25, and WS1.5 models. Use with 16 inch diameter mineral tanks when configured for downflow brining, or with 21 inch diameter tanks when using upflow brining. Injector sizing is critical to proper brine draw and regeneration efficiency, so verify your tank diameter and brining direction before ordering. This is a genuine Clack replacement part with the correct orifice sizing for the I Orange flow classification.
Description
Clack V3010-1I Injector Assembly
Venturi Brining Process
Pressure Differential
High-velocity water flow through the injector throat creates negative pressure that pulls brine solution from the salt tank into the control valve body
Resin Regeneration
Brine mixture flows through the softener resin bed, exchanging sodium ions for captured hardness minerals and restoring the resin's exchange capacity
Flush Cycle
Fresh water rinses away spent brine and displaced minerals, preparing the system to return to service mode with fully regenerated resin media
Tank & Valve Specifications
The Clack V3010-1I orange injector fits all 1 inch and 1.25 inch Clack control valves including WS1, WS1.25, and WS1.5 models. Use with 16 inch diameter mineral tanks when configured for downflow brining, or with 21 inch diameter tanks when using upflow brining. Injector sizing is critical to proper brine draw and regeneration efficiency, so verify your tank diameter and brining direction before ordering. This is a genuine Clack replacement part with the correct orifice sizing for the I Orange flow classification.
