HomeStore

Clack (V3010-1J)-C-Series Injector Assembly - J Lt Blue

Product image 1

Clack (V3010-1J)-C-Series Injector Assembly - J Lt Blue

The Clack V3010-1J C-Series Injector Assembly in light blue is a precision-engineered venturi component designed for reliable brine draw in residential and commercial water softener systems. This genuine Clack replacement part ensures consistent regeneration performance in C-Series control valves.
SPECIFICATIONS

Technical Details

Model Number V3010-1J
Series Clack C-Series
Color Code Light Blue (J)
Component Type Venturi Injector Assembly
Application Brine Draw & Regeneration
Material Chemical-Resistant Polymer
Manufacturer Clack Corporation
Compatibility C-Series Control Valves
INSTALLATION & USE

Injector Replacement Steps

  1. Shut off water supply and relieve system pressure before disconnecting brine line from control valve
  2. Remove the existing injector assembly from the valve body, noting the orientation of the nozzle and throat components
  3. Install the V3010-1J injector assembly ensuring proper alignment with brine intake and outlet ports
  4. Reconnect brine line and restore water pressure, then initiate a manual regeneration cycle to verify proper brine draw
COMPATIBILITY

System Fit

This light blue J-rated injector is designed exclusively for Clack C-Series control valves and matches specific flow rate and draw capacity requirements. Color-coded injectors correspond to different water pressure ranges and system sizes, so verify your existing injector color before ordering. The V3010-1J replaces worn or damaged injectors that result in incomplete regeneration, high salt usage, or failure to draw brine during softener cycles.

🔧 Always keep the injector screen clean and inspect the throat and nozzle for mineral buildup during replacement—even small deposits can reduce brine draw efficiency and cause regeneration failures.
The Clack V3010-1J C-Series Injector Assembly in light blue is a precision-engineered venturi component designed for reliable brine draw in residential and commercial water softener systems. This genuine Clack replacement part ensures consistent regeneration performance in C-Series control valves.
SPECIFICATIONS

Technical Details

Model Number V3010-1J
Series Clack C-Series
Color Code Light Blue (J)
Component Type Venturi Injector Assembly
Application Brine Draw & Regeneration
Material Chemical-Resistant Polymer
Manufacturer Clack Corporation
Compatibility C-Series Control Valves
INSTALLATION & USE

Injector Replacement Steps

  1. Shut off water supply and relieve system pressure before disconnecting brine line from control valve
  2. Remove the existing injector assembly from the valve body, noting the orientation of the nozzle and throat components
  3. Install the V3010-1J injector assembly ensuring proper alignment with brine intake and outlet ports
  4. Reconnect brine line and restore water pressure, then initiate a manual regeneration cycle to verify proper brine draw
COMPATIBILITY

System Fit

This light blue J-rated injector is designed exclusively for Clack C-Series control valves and matches specific flow rate and draw capacity requirements. Color-coded injectors correspond to different water pressure ranges and system sizes, so verify your existing injector color before ordering. The V3010-1J replaces worn or damaged injectors that result in incomplete regeneration, high salt usage, or failure to draw brine during softener cycles.

🔧 Always keep the injector screen clean and inspect the throat and nozzle for mineral buildup during replacement—even small deposits can reduce brine draw efficiency and cause regeneration failures.
$4.90

Original: $14.00

-65%
Clack (V3010-1J)-C-Series Injector Assembly - J Lt Blue—

$14.00

$4.90

Description

The Clack V3010-1J C-Series Injector Assembly in light blue is a precision-engineered venturi component designed for reliable brine draw in residential and commercial water softener systems. This genuine Clack replacement part ensures consistent regeneration performance in C-Series control valves.
SPECIFICATIONS

Technical Details

Model Number V3010-1J
Series Clack C-Series
Color Code Light Blue (J)
Component Type Venturi Injector Assembly
Application Brine Draw & Regeneration
Material Chemical-Resistant Polymer
Manufacturer Clack Corporation
Compatibility C-Series Control Valves
INSTALLATION & USE

Injector Replacement Steps

  1. Shut off water supply and relieve system pressure before disconnecting brine line from control valve
  2. Remove the existing injector assembly from the valve body, noting the orientation of the nozzle and throat components
  3. Install the V3010-1J injector assembly ensuring proper alignment with brine intake and outlet ports
  4. Reconnect brine line and restore water pressure, then initiate a manual regeneration cycle to verify proper brine draw
COMPATIBILITY

System Fit

This light blue J-rated injector is designed exclusively for Clack C-Series control valves and matches specific flow rate and draw capacity requirements. Color-coded injectors correspond to different water pressure ranges and system sizes, so verify your existing injector color before ordering. The V3010-1J replaces worn or damaged injectors that result in incomplete regeneration, high salt usage, or failure to draw brine during softener cycles.

🔧 Always keep the injector screen clean and inspect the throat and nozzle for mineral buildup during replacement—even small deposits can reduce brine draw efficiency and cause regeneration failures.
Clack (V3010-1J)-C-Series Injector Assembly - J Lt Blue | Isopure Water