Clack (H1023)-Poly Tubing, Natural 3/8" OD x 1/4" ID
Clack H1023 Tubing Technical Details
| Model Number | Clack H1023 |
| Material | Natural Polyethylene (PE) |
| Outer Diameter | 3/8 inch |
| Inner Diameter | 1/4 inch |
| Wall Thickness | 1/16 inch |
| Application | Drain lines, brine lines, overflow lines |
| Temperature Range | 33°F to 140°F |
| Compliance | NSF/ANSI 61 certified for potable water |
How to Install Poly Tubing
- Cut tubing to required length using a sharp utility knife or tubing cutter for a clean, square edge
- Push tubing firmly into compression fittings or barbed connectors until it seats fully against the internal stop
- For barbed fittings, secure the connection with a stainless steel hose clamp rated for continuous water contact
- Avoid sharp bends or kinks that restrict flow; use a minimum bend radius of 2 inches for this tubing size
System Compatibility
This 3/8" OD x 1/4" ID tubing is compatible with all Clack water softener control valves including WS1, WS1.25, WS2, and V3000 series models. It works with standard 1/4" compression fittings and 3/8" barbed connectors commonly found on brine tanks, drain saddles, and air check assemblies. Also suitable for use with Fleck, Autotrol, and other softener brands using the same tubing dimensions.
Clack H1023 Tubing Technical Details
| Model Number | Clack H1023 |
| Material | Natural Polyethylene (PE) |
| Outer Diameter | 3/8 inch |
| Inner Diameter | 1/4 inch |
| Wall Thickness | 1/16 inch |
| Application | Drain lines, brine lines, overflow lines |
| Temperature Range | 33°F to 140°F |
| Compliance | NSF/ANSI 61 certified for potable water |
How to Install Poly Tubing
- Cut tubing to required length using a sharp utility knife or tubing cutter for a clean, square edge
- Push tubing firmly into compression fittings or barbed connectors until it seats fully against the internal stop
- For barbed fittings, secure the connection with a stainless steel hose clamp rated for continuous water contact
- Avoid sharp bends or kinks that restrict flow; use a minimum bend radius of 2 inches for this tubing size
System Compatibility
This 3/8" OD x 1/4" ID tubing is compatible with all Clack water softener control valves including WS1, WS1.25, WS2, and V3000 series models. It works with standard 1/4" compression fittings and 3/8" barbed connectors commonly found on brine tanks, drain saddles, and air check assemblies. Also suitable for use with Fleck, Autotrol, and other softener brands using the same tubing dimensions.
Description
Clack H1023 Tubing Technical Details
| Model Number | Clack H1023 |
| Material | Natural Polyethylene (PE) |
| Outer Diameter | 3/8 inch |
| Inner Diameter | 1/4 inch |
| Wall Thickness | 1/16 inch |
| Application | Drain lines, brine lines, overflow lines |
| Temperature Range | 33°F to 140°F |
| Compliance | NSF/ANSI 61 certified for potable water |
How to Install Poly Tubing
- Cut tubing to required length using a sharp utility knife or tubing cutter for a clean, square edge
- Push tubing firmly into compression fittings or barbed connectors until it seats fully against the internal stop
- For barbed fittings, secure the connection with a stainless steel hose clamp rated for continuous water contact
- Avoid sharp bends or kinks that restrict flow; use a minimum bend radius of 2 inches for this tubing size
System Compatibility
This 3/8" OD x 1/4" ID tubing is compatible with all Clack water softener control valves including WS1, WS1.25, WS2, and V3000 series models. It works with standard 1/4" compression fittings and 3/8" barbed connectors commonly found on brine tanks, drain saddles, and air check assemblies. Also suitable for use with Fleck, Autotrol, and other softener brands using the same tubing dimensions.
