Clack (V3010-1H)-Clack Injector-H Green-14" Down,18" Up
Clack V3010-1H Injector Technical Details
| Model Number | V3010-1H |
| Manufacturer | Clack Corporation |
| Color Code | H Green |
| Valve Compatibility | 1" and 1.25" Clack valves |
| Downflow Brining | 14" tank diameter |
| Upflow Brining | 18" tank diameter |
| Component Type | Brine injector assembly |
| Application | Water softener regeneration |
Replacing the Clack Injector
- Depressurize the system and bypass water flow before disassembling the valve body to access the existing injector.
- Remove the old injector from the valve assembly, noting the orientation and position of the throat and nozzle components.
- Install the new V3010-1H injector, ensuring the H Green color code matches your tank diameter and brining method (14" downflow or 18" upflow).
- Reassemble the valve body, restore water pressure, and initiate a manual regeneration cycle to verify proper brine draw and system function.
System Requirements
This H Green injector is designed exclusively for Clack control valves with 1" or 1.25" port sizes. Proper injector sizing is critical for effective regeneration; the V3010-1H specification matches 14-inch diameter mineral tanks configured for downflow brining and 18-inch diameter tanks using upflow brining. Using an incorrectly sized injector will result in inadequate brine draw, incomplete regeneration, and reduced softening capacity. Verify your tank diameter and brining configuration before ordering replacement injectors.
Clack V3010-1H Injector Technical Details
| Model Number | V3010-1H |
| Manufacturer | Clack Corporation |
| Color Code | H Green |
| Valve Compatibility | 1" and 1.25" Clack valves |
| Downflow Brining | 14" tank diameter |
| Upflow Brining | 18" tank diameter |
| Component Type | Brine injector assembly |
| Application | Water softener regeneration |
Replacing the Clack Injector
- Depressurize the system and bypass water flow before disassembling the valve body to access the existing injector.
- Remove the old injector from the valve assembly, noting the orientation and position of the throat and nozzle components.
- Install the new V3010-1H injector, ensuring the H Green color code matches your tank diameter and brining method (14" downflow or 18" upflow).
- Reassemble the valve body, restore water pressure, and initiate a manual regeneration cycle to verify proper brine draw and system function.
System Requirements
This H Green injector is designed exclusively for Clack control valves with 1" or 1.25" port sizes. Proper injector sizing is critical for effective regeneration; the V3010-1H specification matches 14-inch diameter mineral tanks configured for downflow brining and 18-inch diameter tanks using upflow brining. Using an incorrectly sized injector will result in inadequate brine draw, incomplete regeneration, and reduced softening capacity. Verify your tank diameter and brining configuration before ordering replacement injectors.
Description
Clack V3010-1H Injector Technical Details
| Model Number | V3010-1H |
| Manufacturer | Clack Corporation |
| Color Code | H Green |
| Valve Compatibility | 1" and 1.25" Clack valves |
| Downflow Brining | 14" tank diameter |
| Upflow Brining | 18" tank diameter |
| Component Type | Brine injector assembly |
| Application | Water softener regeneration |
Replacing the Clack Injector
- Depressurize the system and bypass water flow before disassembling the valve body to access the existing injector.
- Remove the old injector from the valve assembly, noting the orientation and position of the throat and nozzle components.
- Install the new V3010-1H injector, ensuring the H Green color code matches your tank diameter and brining method (14" downflow or 18" upflow).
- Reassemble the valve body, restore water pressure, and initiate a manual regeneration cycle to verify proper brine draw and system function.
System Requirements
This H Green injector is designed exclusively for Clack control valves with 1" or 1.25" port sizes. Proper injector sizing is critical for effective regeneration; the V3010-1H specification matches 14-inch diameter mineral tanks configured for downflow brining and 18-inch diameter tanks using upflow brining. Using an incorrectly sized injector will result in inadequate brine draw, incomplete regeneration, and reduced softening capacity. Verify your tank diameter and brining configuration before ordering replacement injectors.
