Clack (V7A106D-15.0)-1 SS Flow Control 15.0 gpm
Technical Details
| Model Number | V7A106D-15.0 |
| Manufacturer | Clack Corporation |
| Flow Rate | 15.0 GPM |
| Port Size | 1 inch |
| Material | Stainless Steel |
| Application | Water Softener Systems |
| Component Type | Flow Control Assembly |
| Thread Type | Standard 1" NPT |
Installation Guidelines
- Verify that your Clack control valve is compatible with 1-inch flow control fittings and confirm system flow requirements do not exceed 15.0 GPM.
- Apply thread sealant tape or paste to male threads, then thread the V7A106D-15.0 flow control into the valve body port hand-tight, finishing with a wrench turn for secure seating.
- Check for leaks during initial system startup and regeneration cycles, ensuring proper flow restriction is maintained throughout the softener's operational cycle.
- Inspect flow control annually for mineral buildup or wear, replacing if flow rate deviates significantly or if backwash cycles become inconsistent.
System Requirements
The Clack V7A106D-15.0 flow control is designed specifically for Clack WS1 and WS1.5 control valves with 1-inch plumbing configurations. This component is suitable for residential water softeners and light commercial installations where regulated flow at 15.0 gallons per minute is required during service and regeneration. Confirm your system's maximum flow demand before installation, as exceeding the rated 15.0 GPM capacity may result in inadequate backwash or incomplete regeneration cycles. This stainless steel construction resists corrosion in high-TDS water and chlorinated municipal supplies.
Technical Details
| Model Number | V7A106D-15.0 |
| Manufacturer | Clack Corporation |
| Flow Rate | 15.0 GPM |
| Port Size | 1 inch |
| Material | Stainless Steel |
| Application | Water Softener Systems |
| Component Type | Flow Control Assembly |
| Thread Type | Standard 1" NPT |
Installation Guidelines
- Verify that your Clack control valve is compatible with 1-inch flow control fittings and confirm system flow requirements do not exceed 15.0 GPM.
- Apply thread sealant tape or paste to male threads, then thread the V7A106D-15.0 flow control into the valve body port hand-tight, finishing with a wrench turn for secure seating.
- Check for leaks during initial system startup and regeneration cycles, ensuring proper flow restriction is maintained throughout the softener's operational cycle.
- Inspect flow control annually for mineral buildup or wear, replacing if flow rate deviates significantly or if backwash cycles become inconsistent.
System Requirements
The Clack V7A106D-15.0 flow control is designed specifically for Clack WS1 and WS1.5 control valves with 1-inch plumbing configurations. This component is suitable for residential water softeners and light commercial installations where regulated flow at 15.0 gallons per minute is required during service and regeneration. Confirm your system's maximum flow demand before installation, as exceeding the rated 15.0 GPM capacity may result in inadequate backwash or incomplete regeneration cycles. This stainless steel construction resists corrosion in high-TDS water and chlorinated municipal supplies.
Description
Technical Details
| Model Number | V7A106D-15.0 |
| Manufacturer | Clack Corporation |
| Flow Rate | 15.0 GPM |
| Port Size | 1 inch |
| Material | Stainless Steel |
| Application | Water Softener Systems |
| Component Type | Flow Control Assembly |
| Thread Type | Standard 1" NPT |
Installation Guidelines
- Verify that your Clack control valve is compatible with 1-inch flow control fittings and confirm system flow requirements do not exceed 15.0 GPM.
- Apply thread sealant tape or paste to male threads, then thread the V7A106D-15.0 flow control into the valve body port hand-tight, finishing with a wrench turn for secure seating.
- Check for leaks during initial system startup and regeneration cycles, ensuring proper flow restriction is maintained throughout the softener's operational cycle.
- Inspect flow control annually for mineral buildup or wear, replacing if flow rate deviates significantly or if backwash cycles become inconsistent.
System Requirements
The Clack V7A106D-15.0 flow control is designed specifically for Clack WS1 and WS1.5 control valves with 1-inch plumbing configurations. This component is suitable for residential water softeners and light commercial installations where regulated flow at 15.0 gallons per minute is required during service and regeneration. Confirm your system's maximum flow demand before installation, as exceeding the rated 15.0 GPM capacity may result in inadequate backwash or incomplete regeneration cycles. This stainless steel construction resists corrosion in high-TDS water and chlorinated municipal supplies.
