Fleck 5800 SXT Katalox Light Iron Filtration System with Advanced Backwash Valve - Ultimate Iron Rust & Hydrogen Sulfide OdorEliminator
Fleck 5800 SXT Katalox Light Iron Filtration System
Four-Stage Chemical-Free Filtration
Katalox Light Chemisorption
Raw well water enters the pressure vessel and contacts Katalox Light media, a manganese dioxide-coated zeolite that catalyzes oxidation of dissolved iron, manganese, and hydrogen sulfide into filterable solids without chemicals or potassium permanganate.
Multi-Contaminant Capture
Oxidized iron, manganese, arsenic, heavy metals, and particulates are trapped within the high-surface-area Katalox Light bed. The media also adsorbs hydrogen sulfide, eliminating rotten egg odor while filtering sediment down to 3 microns.
Clean Water Distribution
Filtered water exits the tank and flows to your entire home at rates up to 21 GPM. The Fleck 5800 SXT digital valve monitors flow and time to ensure optimal contact with media for consistent iron and sulfide removal throughout the day.
Automatic Backwash Cleaning
The Fleck 5800 SXT automatically initiates double backwash cycles based on programmable time or meter settings. High-velocity upflow lifts and cleans the media bed, flushing captured contaminants to drain and restoring full filtration capacity without operator intervention.
Media life 5–10 yearsContaminant Removal Capacity
| Iron (Fe) | Up to 7 ppm dissolved and precipitated |
| Hydrogen Sulfide (H₂S) | Up to 2 ppm |
| Manganese (Mn) | Up to 1 ppm or higher |
| Arsenic (As) | Up to 0.3 ppm with proper pH and oxidation |
| Heavy Metals | Zinc, copper, lead, radium reduction |
| Particulate Filtration | Down to 3 microns |
| Service Flow Rate | Up to 21 GPM |
| Optimal pH Range | 6.5–9.0 |
Fleck 5800 SXT Digital Features
The Fleck 5800 SXT valve offers programmable time-clock or metered regeneration with dual backwash cycles for thorough media cleaning. Digital controls include non-volatile memory that retains programming during power outages, adjustable cycle times, and immediate or delayed regeneration options. The valve supports standard 1-inch or 1.25-inch plumbing connections and operates on standard 110V power with low water consumption during backwash.
Installation Requirements
This system is designed for standard well water applications with iron up to 7 ppm, hydrogen sulfide up to 2 ppm, and pH between 6.5 and 9.0. A professional water test is recommended before installation to confirm contaminant levels and adjust system sizing if needed. Requires adequate water pressure (25–80 psi), 110V electrical outlet, and drain access for backwash discharge. Pre-assembled and ready for plumbing integration. Professional installation recommended for optimal performance and warranty compliance.
Fleck 5800 SXT Katalox Light Iron Filtration System
Four-Stage Chemical-Free Filtration
Katalox Light Chemisorption
Raw well water enters the pressure vessel and contacts Katalox Light media, a manganese dioxide-coated zeolite that catalyzes oxidation of dissolved iron, manganese, and hydrogen sulfide into filterable solids without chemicals or potassium permanganate.
Multi-Contaminant Capture
Oxidized iron, manganese, arsenic, heavy metals, and particulates are trapped within the high-surface-area Katalox Light bed. The media also adsorbs hydrogen sulfide, eliminating rotten egg odor while filtering sediment down to 3 microns.
Clean Water Distribution
Filtered water exits the tank and flows to your entire home at rates up to 21 GPM. The Fleck 5800 SXT digital valve monitors flow and time to ensure optimal contact with media for consistent iron and sulfide removal throughout the day.
Automatic Backwash Cleaning
The Fleck 5800 SXT automatically initiates double backwash cycles based on programmable time or meter settings. High-velocity upflow lifts and cleans the media bed, flushing captured contaminants to drain and restoring full filtration capacity without operator intervention.
Media life 5–10 yearsContaminant Removal Capacity
| Iron (Fe) | Up to 7 ppm dissolved and precipitated |
| Hydrogen Sulfide (H₂S) | Up to 2 ppm |
| Manganese (Mn) | Up to 1 ppm or higher |
| Arsenic (As) | Up to 0.3 ppm with proper pH and oxidation |
| Heavy Metals | Zinc, copper, lead, radium reduction |
| Particulate Filtration | Down to 3 microns |
| Service Flow Rate | Up to 21 GPM |
| Optimal pH Range | 6.5–9.0 |
Fleck 5800 SXT Digital Features
The Fleck 5800 SXT valve offers programmable time-clock or metered regeneration with dual backwash cycles for thorough media cleaning. Digital controls include non-volatile memory that retains programming during power outages, adjustable cycle times, and immediate or delayed regeneration options. The valve supports standard 1-inch or 1.25-inch plumbing connections and operates on standard 110V power with low water consumption during backwash.
Installation Requirements
This system is designed for standard well water applications with iron up to 7 ppm, hydrogen sulfide up to 2 ppm, and pH between 6.5 and 9.0. A professional water test is recommended before installation to confirm contaminant levels and adjust system sizing if needed. Requires adequate water pressure (25–80 psi), 110V electrical outlet, and drain access for backwash discharge. Pre-assembled and ready for plumbing integration. Professional installation recommended for optimal performance and warranty compliance.
Original: $1,299.00
-65%$1,299.00
$454.65Description
Fleck 5800 SXT Katalox Light Iron Filtration System
Four-Stage Chemical-Free Filtration
Katalox Light Chemisorption
Raw well water enters the pressure vessel and contacts Katalox Light media, a manganese dioxide-coated zeolite that catalyzes oxidation of dissolved iron, manganese, and hydrogen sulfide into filterable solids without chemicals or potassium permanganate.
Multi-Contaminant Capture
Oxidized iron, manganese, arsenic, heavy metals, and particulates are trapped within the high-surface-area Katalox Light bed. The media also adsorbs hydrogen sulfide, eliminating rotten egg odor while filtering sediment down to 3 microns.
Clean Water Distribution
Filtered water exits the tank and flows to your entire home at rates up to 21 GPM. The Fleck 5800 SXT digital valve monitors flow and time to ensure optimal contact with media for consistent iron and sulfide removal throughout the day.
Automatic Backwash Cleaning
The Fleck 5800 SXT automatically initiates double backwash cycles based on programmable time or meter settings. High-velocity upflow lifts and cleans the media bed, flushing captured contaminants to drain and restoring full filtration capacity without operator intervention.
Media life 5–10 yearsContaminant Removal Capacity
| Iron (Fe) | Up to 7 ppm dissolved and precipitated |
| Hydrogen Sulfide (H₂S) | Up to 2 ppm |
| Manganese (Mn) | Up to 1 ppm or higher |
| Arsenic (As) | Up to 0.3 ppm with proper pH and oxidation |
| Heavy Metals | Zinc, copper, lead, radium reduction |
| Particulate Filtration | Down to 3 microns |
| Service Flow Rate | Up to 21 GPM |
| Optimal pH Range | 6.5–9.0 |
Fleck 5800 SXT Digital Features
The Fleck 5800 SXT valve offers programmable time-clock or metered regeneration with dual backwash cycles for thorough media cleaning. Digital controls include non-volatile memory that retains programming during power outages, adjustable cycle times, and immediate or delayed regeneration options. The valve supports standard 1-inch or 1.25-inch plumbing connections and operates on standard 110V power with low water consumption during backwash.
Installation Requirements
This system is designed for standard well water applications with iron up to 7 ppm, hydrogen sulfide up to 2 ppm, and pH between 6.5 and 9.0. A professional water test is recommended before installation to confirm contaminant levels and adjust system sizing if needed. Requires adequate water pressure (25–80 psi), 110V electrical outlet, and drain access for backwash discharge. Pre-assembled and ready for plumbing integration. Professional installation recommended for optimal performance and warranty compliance.
