Hanna (HI93711-03) Chlorine, Total, DPD Method (300 Tests)
The Hanna HI93711-03 reagent kit delivers 300 precise chlorine measurements using the DPD (N,N-diethyl-p-phenylenediamine) method, the industry standard for total chlorine analysis in drinking water, pools, and industrial applications. Designed for use with compatible Hanna photometers, this kit provides accurate readings from 0.00 to 3.50 mg/L with select meters extending to 5.00 mg/L.
SPECIFICATIONS
Technical Details
| Model Number | HI93711-03 |
| Manufacturer | Hanna Instruments |
| Parameter Tested | Total Chlorine (free + combined) |
| Test Method | DPD (N,N-diethyl-p-phenylenediamine) |
| Measurement Range | 0.00 to 3.50 mg/L (up to 5.00 mg/L on select meters) |
| Number of Tests | 300 tests per kit |
| Sample Type | Drinking water, pool water, wastewater, process water |
| Reagent Form | Pre-measured powder packets |
INSTALLATION & USE
Testing Procedure
- Fill the sample cuvette with 10 mL of water sample to the marked line and place it in the photometer to zero the instrument.
- Add the contents of one HI93711-03 reagent packet to the sample cuvette, cap tightly, and shake vigorously for 20 seconds to fully dissolve the powder.
- Allow the sample to react for the time specified in your photometer's instructions (typically 2-3 minutes), then place the prepared cuvette in the meter and read the total chlorine concentration directly in mg/L.
- Rinse cuvettes thoroughly with deionized water between tests and store reagent packets in a cool, dry location away from direct sunlight.
COMPATIBILITY
Works With These Hanna Instruments
The HI93711-03 reagent kit is designed for use with Hanna portable and benchtop photometers that support the chlorine total DPD method, including the HI96711, HI96734, HI83399, HI83414, and other models featuring chlorine testing capabilities. Verify your specific photometer model supports method HI93711 before ordering. This reagent is not compatible with colorimetric comparators or test strips and requires a photometer for accurate digital readings.
🔧 Store reagent packets in their original foil packaging until use and avoid touching the inside of cuvettes with your fingers—oils and contaminants will skew results. For the most consistent readings, test samples at the same temperature each time and always zero your photometer with untreated sample water before adding reagent.
The Hanna HI93711-03 reagent kit delivers 300 precise chlorine measurements using the DPD (N,N-diethyl-p-phenylenediamine) method, the industry standard for total chlorine analysis in drinking water, pools, and industrial applications. Designed for use with compatible Hanna photometers, this kit provides accurate readings from 0.00 to 3.50 mg/L with select meters extending to 5.00 mg/L.
SPECIFICATIONS
Technical Details
| Model Number | HI93711-03 |
| Manufacturer | Hanna Instruments |
| Parameter Tested | Total Chlorine (free + combined) |
| Test Method | DPD (N,N-diethyl-p-phenylenediamine) |
| Measurement Range | 0.00 to 3.50 mg/L (up to 5.00 mg/L on select meters) |
| Number of Tests | 300 tests per kit |
| Sample Type | Drinking water, pool water, wastewater, process water |
| Reagent Form | Pre-measured powder packets |
INSTALLATION & USE
Testing Procedure
- Fill the sample cuvette with 10 mL of water sample to the marked line and place it in the photometer to zero the instrument.
- Add the contents of one HI93711-03 reagent packet to the sample cuvette, cap tightly, and shake vigorously for 20 seconds to fully dissolve the powder.
- Allow the sample to react for the time specified in your photometer's instructions (typically 2-3 minutes), then place the prepared cuvette in the meter and read the total chlorine concentration directly in mg/L.
- Rinse cuvettes thoroughly with deionized water between tests and store reagent packets in a cool, dry location away from direct sunlight.
COMPATIBILITY
Works With These Hanna Instruments
The HI93711-03 reagent kit is designed for use with Hanna portable and benchtop photometers that support the chlorine total DPD method, including the HI96711, HI96734, HI83399, HI83414, and other models featuring chlorine testing capabilities. Verify your specific photometer model supports method HI93711 before ordering. This reagent is not compatible with colorimetric comparators or test strips and requires a photometer for accurate digital readings.
🔧 Store reagent packets in their original foil packaging until use and avoid touching the inside of cuvettes with your fingers—oils and contaminants will skew results. For the most consistent readings, test samples at the same temperature each time and always zero your photometer with untreated sample water before adding reagent.
$170.00
Hanna (HI93711-03) Chlorine, Total, DPD Method (300 Tests)—
$170.00
Description
The Hanna HI93711-03 reagent kit delivers 300 precise chlorine measurements using the DPD (N,N-diethyl-p-phenylenediamine) method, the industry standard for total chlorine analysis in drinking water, pools, and industrial applications. Designed for use with compatible Hanna photometers, this kit provides accurate readings from 0.00 to 3.50 mg/L with select meters extending to 5.00 mg/L.
SPECIFICATIONS
Technical Details
| Model Number | HI93711-03 |
| Manufacturer | Hanna Instruments |
| Parameter Tested | Total Chlorine (free + combined) |
| Test Method | DPD (N,N-diethyl-p-phenylenediamine) |
| Measurement Range | 0.00 to 3.50 mg/L (up to 5.00 mg/L on select meters) |
| Number of Tests | 300 tests per kit |
| Sample Type | Drinking water, pool water, wastewater, process water |
| Reagent Form | Pre-measured powder packets |
INSTALLATION & USE
Testing Procedure
- Fill the sample cuvette with 10 mL of water sample to the marked line and place it in the photometer to zero the instrument.
- Add the contents of one HI93711-03 reagent packet to the sample cuvette, cap tightly, and shake vigorously for 20 seconds to fully dissolve the powder.
- Allow the sample to react for the time specified in your photometer's instructions (typically 2-3 minutes), then place the prepared cuvette in the meter and read the total chlorine concentration directly in mg/L.
- Rinse cuvettes thoroughly with deionized water between tests and store reagent packets in a cool, dry location away from direct sunlight.
COMPATIBILITY
Works With These Hanna Instruments
The HI93711-03 reagent kit is designed for use with Hanna portable and benchtop photometers that support the chlorine total DPD method, including the HI96711, HI96734, HI83399, HI83414, and other models featuring chlorine testing capabilities. Verify your specific photometer model supports method HI93711 before ordering. This reagent is not compatible with colorimetric comparators or test strips and requires a photometer for accurate digital readings.
🔧 Store reagent packets in their original foil packaging until use and avoid touching the inside of cuvettes with your fingers—oils and contaminants will skew results. For the most consistent readings, test samples at the same temperature each time and always zero your photometer with untreated sample water before adding reagent.
