HomeStore

Hanna Instruments HI70442L 1500 mg-L (ppm) TDS Calibration Solution, 500mL Bottle

Product image 1

Hanna Instruments HI70442L 1500 mg-L (ppm) TDS Calibration Solution, 500mL Bottle

The Hanna Instruments HI70442L delivers laboratory-grade 1500 mg/L TDS calibration solution in a professional 500mL bottle designed to maintain solution integrity. This potassium chloride-based standard is NIST-traceable and specifically formulated to ensure your TDS meters deliver accurate readings in the mid-range measurement zone.
SPECIFICATIONS

Technical Details

Manufacturer Hanna Instruments
Model Number HI70442L
TDS Value 1500 mg/L (ppm) at 25°C
Solution Base High-quality potassium chloride
Bottle Volume 500mL
Conversion Factor 0.65 ppm = 1 µS/cm (approx.)
Traceability NIST-standardized potassium chloride
Packaging Light and air-resistant bottle
INSTALLATION & USE

Calibration Procedure

  1. Remove the protective cap from your TDS meter probe and rinse the electrode with distilled or deionized water
  2. Pour a small amount of HI70442L solution into a clean container and immerse the probe to the recommended depth
  3. Follow your meter's calibration procedure to set the 1500 ppm reference point, allowing the reading to stabilize before confirming
  4. Rinse the probe thoroughly with distilled water after calibration and store according to manufacturer guidelines
COMPATIBILITY

Meter Compatibility

The HI70442L 1500 ppm calibration solution is compatible with all Hanna Instruments TDS meters and most other brands that accept standard potassium chloride-based calibration standards. This mid-range value is ideal for calibrating meters used in residential water quality testing, aquarium monitoring, hydroponics, and light commercial applications where TDS readings typically fall between 500 and 3000 ppm. The 500mL bottle provides enough solution for dozens of calibrations when proper technique is used.

🔧 Always discard the calibration solution after each use rather than pouring it back into the bottle. Contamination from your probe will compromise the accuracy of the standard, defeating the purpose of calibration. Pour only what you need into a separate clean container.
The Hanna Instruments HI70442L delivers laboratory-grade 1500 mg/L TDS calibration solution in a professional 500mL bottle designed to maintain solution integrity. This potassium chloride-based standard is NIST-traceable and specifically formulated to ensure your TDS meters deliver accurate readings in the mid-range measurement zone.
SPECIFICATIONS

Technical Details

Manufacturer Hanna Instruments
Model Number HI70442L
TDS Value 1500 mg/L (ppm) at 25°C
Solution Base High-quality potassium chloride
Bottle Volume 500mL
Conversion Factor 0.65 ppm = 1 µS/cm (approx.)
Traceability NIST-standardized potassium chloride
Packaging Light and air-resistant bottle
INSTALLATION & USE

Calibration Procedure

  1. Remove the protective cap from your TDS meter probe and rinse the electrode with distilled or deionized water
  2. Pour a small amount of HI70442L solution into a clean container and immerse the probe to the recommended depth
  3. Follow your meter's calibration procedure to set the 1500 ppm reference point, allowing the reading to stabilize before confirming
  4. Rinse the probe thoroughly with distilled water after calibration and store according to manufacturer guidelines
COMPATIBILITY

Meter Compatibility

The HI70442L 1500 ppm calibration solution is compatible with all Hanna Instruments TDS meters and most other brands that accept standard potassium chloride-based calibration standards. This mid-range value is ideal for calibrating meters used in residential water quality testing, aquarium monitoring, hydroponics, and light commercial applications where TDS readings typically fall between 500 and 3000 ppm. The 500mL bottle provides enough solution for dozens of calibrations when proper technique is used.

🔧 Always discard the calibration solution after each use rather than pouring it back into the bottle. Contamination from your probe will compromise the accuracy of the standard, defeating the purpose of calibration. Pour only what you need into a separate clean container.
$15.00

Original: $42.87

-65%
Hanna Instruments HI70442L 1500 mg-L (ppm) TDS Calibration Solution, 500mL Bottle—

$42.87

$15.00

Description

The Hanna Instruments HI70442L delivers laboratory-grade 1500 mg/L TDS calibration solution in a professional 500mL bottle designed to maintain solution integrity. This potassium chloride-based standard is NIST-traceable and specifically formulated to ensure your TDS meters deliver accurate readings in the mid-range measurement zone.
SPECIFICATIONS

Technical Details

Manufacturer Hanna Instruments
Model Number HI70442L
TDS Value 1500 mg/L (ppm) at 25°C
Solution Base High-quality potassium chloride
Bottle Volume 500mL
Conversion Factor 0.65 ppm = 1 µS/cm (approx.)
Traceability NIST-standardized potassium chloride
Packaging Light and air-resistant bottle
INSTALLATION & USE

Calibration Procedure

  1. Remove the protective cap from your TDS meter probe and rinse the electrode with distilled or deionized water
  2. Pour a small amount of HI70442L solution into a clean container and immerse the probe to the recommended depth
  3. Follow your meter's calibration procedure to set the 1500 ppm reference point, allowing the reading to stabilize before confirming
  4. Rinse the probe thoroughly with distilled water after calibration and store according to manufacturer guidelines
COMPATIBILITY

Meter Compatibility

The HI70442L 1500 ppm calibration solution is compatible with all Hanna Instruments TDS meters and most other brands that accept standard potassium chloride-based calibration standards. This mid-range value is ideal for calibrating meters used in residential water quality testing, aquarium monitoring, hydroponics, and light commercial applications where TDS readings typically fall between 500 and 3000 ppm. The 500mL bottle provides enough solution for dozens of calibrations when proper technique is used.

🔧 Always discard the calibration solution after each use rather than pouring it back into the bottle. Contamination from your probe will compromise the accuracy of the standard, defeating the purpose of calibration. Pour only what you need into a separate clean container.
Hanna Instruments HI70442L 1500 mg-L (ppm) TDS Calibration Solution, 500mL Bottle | Isopure Water