IPW Industries Inc. Compatible to Hydrotech 33001033-50 GPD Membrane With Filters Set; Compatible to Aqua Flo 1240 Platinum
The IPW Industries Hydrotech-compatible 33001033 replacement set delivers a complete 50 GPD membrane and three-stage filtration for seamless compatibility with Hydrotech HT101, HT102, HT123, and Aqua Flo 1240 series systems. This kit restores your RO system to factory performance with a thin film composite membrane and matching sediment and carbon block prefilters.
SPECIFICATIONS
Hydrotech 33001033 Compatible Membrane Kit
| Membrane Production Rate | 50 gallons per day (GPD) |
| Membrane Type | Thin film composite (TFC) |
| Sediment Prefilter | Hydrotech S-FS-02 compatible |
| Carbon Block Filters | 2x Hydrotech 41400009 S-FS-19 compatible (pre and post) |
| Set Components | 4 pieces total (1 membrane, 3 filters) |
| Compatible Brands | Hydrotech, Aqua Flo |
| Manufacturer | IPW Industries Inc. |
| Application | Residential reverse osmosis systems |
INSTALLATION & USE
Replacing Your Membrane and Filters
- Shut off water supply and relieve system pressure by opening the RO faucet. Disconnect tubing from the old membrane housing and filter housings.
- Unscrew filter housings and remove old sediment and carbon filters. Insert the new S-FS-02 compatible sediment prefilter in the first stage and one S-FS-19 compatible carbon block in the second stage housing.
- Remove the old 33001033 membrane from its housing and slide in the new IPW-compatible 50 GPD membrane. Ensure the membrane is fully seated and the housing cap is hand-tightened.
- Install the second S-FS-19 compatible carbon block as the post-filter in the final stage housing. Reconnect all tubing to their respective ports.
- Turn on water supply slowly and check all connections for leaks. Flush the system by running water to drain for 10 minutes, then allow the storage tank to fill before first use.
COMPATIBILITY
Fits Hydrotech and Aqua Flo RO Systems
This IPW Industries replacement set is engineered as a direct fit for Hydrotech HT101 series (models 10105, 10106, 10107), HT102 series (models 10204, 10205, 10206, 10207), HT123 series (models 12301, 12302, 12303), F-HT-9, and F-HTF-9 reverse osmosis systems. Also compatible with Aqua Flo 1240 series E, M, and Pro systems. The 33001033 membrane replaces Hydrotech part number 33001033, while the filters match Hydrotech 41400009 S-FS-19 and S-FS-02 specifications for complete system restoration.
🔧 Mark the installation date on each filter housing with a permanent marker. Replace sediment and carbon filters every 6-12 months and the RO membrane every 2-3 years depending on your source water quality and daily usage volume.
The IPW Industries Hydrotech-compatible 33001033 replacement set delivers a complete 50 GPD membrane and three-stage filtration for seamless compatibility with Hydrotech HT101, HT102, HT123, and Aqua Flo 1240 series systems. This kit restores your RO system to factory performance with a thin film composite membrane and matching sediment and carbon block prefilters.
SPECIFICATIONS
Hydrotech 33001033 Compatible Membrane Kit
| Membrane Production Rate | 50 gallons per day (GPD) |
| Membrane Type | Thin film composite (TFC) |
| Sediment Prefilter | Hydrotech S-FS-02 compatible |
| Carbon Block Filters | 2x Hydrotech 41400009 S-FS-19 compatible (pre and post) |
| Set Components | 4 pieces total (1 membrane, 3 filters) |
| Compatible Brands | Hydrotech, Aqua Flo |
| Manufacturer | IPW Industries Inc. |
| Application | Residential reverse osmosis systems |
INSTALLATION & USE
Replacing Your Membrane and Filters
- Shut off water supply and relieve system pressure by opening the RO faucet. Disconnect tubing from the old membrane housing and filter housings.
- Unscrew filter housings and remove old sediment and carbon filters. Insert the new S-FS-02 compatible sediment prefilter in the first stage and one S-FS-19 compatible carbon block in the second stage housing.
- Remove the old 33001033 membrane from its housing and slide in the new IPW-compatible 50 GPD membrane. Ensure the membrane is fully seated and the housing cap is hand-tightened.
- Install the second S-FS-19 compatible carbon block as the post-filter in the final stage housing. Reconnect all tubing to their respective ports.
- Turn on water supply slowly and check all connections for leaks. Flush the system by running water to drain for 10 minutes, then allow the storage tank to fill before first use.
COMPATIBILITY
Fits Hydrotech and Aqua Flo RO Systems
This IPW Industries replacement set is engineered as a direct fit for Hydrotech HT101 series (models 10105, 10106, 10107), HT102 series (models 10204, 10205, 10206, 10207), HT123 series (models 12301, 12302, 12303), F-HT-9, and F-HTF-9 reverse osmosis systems. Also compatible with Aqua Flo 1240 series E, M, and Pro systems. The 33001033 membrane replaces Hydrotech part number 33001033, while the filters match Hydrotech 41400009 S-FS-19 and S-FS-02 specifications for complete system restoration.
🔧 Mark the installation date on each filter housing with a permanent marker. Replace sediment and carbon filters every 6-12 months and the RO membrane every 2-3 years depending on your source water quality and daily usage volume.
$23.80
Original: $67.99
-65%IPW Industries Inc. Compatible to Hydrotech 33001033-50 GPD Membrane With Filters Set; Compatible to Aqua Flo 1240 Platinum—
$67.99
$23.80Description
The IPW Industries Hydrotech-compatible 33001033 replacement set delivers a complete 50 GPD membrane and three-stage filtration for seamless compatibility with Hydrotech HT101, HT102, HT123, and Aqua Flo 1240 series systems. This kit restores your RO system to factory performance with a thin film composite membrane and matching sediment and carbon block prefilters.
SPECIFICATIONS
Hydrotech 33001033 Compatible Membrane Kit
| Membrane Production Rate | 50 gallons per day (GPD) |
| Membrane Type | Thin film composite (TFC) |
| Sediment Prefilter | Hydrotech S-FS-02 compatible |
| Carbon Block Filters | 2x Hydrotech 41400009 S-FS-19 compatible (pre and post) |
| Set Components | 4 pieces total (1 membrane, 3 filters) |
| Compatible Brands | Hydrotech, Aqua Flo |
| Manufacturer | IPW Industries Inc. |
| Application | Residential reverse osmosis systems |
INSTALLATION & USE
Replacing Your Membrane and Filters
- Shut off water supply and relieve system pressure by opening the RO faucet. Disconnect tubing from the old membrane housing and filter housings.
- Unscrew filter housings and remove old sediment and carbon filters. Insert the new S-FS-02 compatible sediment prefilter in the first stage and one S-FS-19 compatible carbon block in the second stage housing.
- Remove the old 33001033 membrane from its housing and slide in the new IPW-compatible 50 GPD membrane. Ensure the membrane is fully seated and the housing cap is hand-tightened.
- Install the second S-FS-19 compatible carbon block as the post-filter in the final stage housing. Reconnect all tubing to their respective ports.
- Turn on water supply slowly and check all connections for leaks. Flush the system by running water to drain for 10 minutes, then allow the storage tank to fill before first use.
COMPATIBILITY
Fits Hydrotech and Aqua Flo RO Systems
This IPW Industries replacement set is engineered as a direct fit for Hydrotech HT101 series (models 10105, 10106, 10107), HT102 series (models 10204, 10205, 10206, 10207), HT123 series (models 12301, 12302, 12303), F-HT-9, and F-HTF-9 reverse osmosis systems. Also compatible with Aqua Flo 1240 series E, M, and Pro systems. The 33001033 membrane replaces Hydrotech part number 33001033, while the filters match Hydrotech 41400009 S-FS-19 and S-FS-02 specifications for complete system restoration.
🔧 Mark the installation date on each filter housing with a permanent marker. Replace sediment and carbon filters every 6-12 months and the RO membrane every 2-3 years depending on your source water quality and daily usage volume.
