HomeStore

IPW Industries Inc Compatible to Pure Water Club 1 Set 5 Pcs Spare Replacement RO DI Filters #Fs-5b

Product image 1

IPW Industries Inc Compatible to Pure Water Club 1 Set 5 Pcs Spare Replacement RO DI Filters #Fs-5b

This complete 5-piece filter replacement set is engineered for 6-stage RO DI systems and delivers Pure Water Club compatibility with IPW Industries quality standards. Each filter is precisely sized at 10 inches and includes sediment pre-filtration, dual carbon block stages, DI resin polishing, and GAC post-filtration for laboratory-grade water purity.
SPECIFICATIONS

Complete Filter Set Details

Model Number FS-5B
Compatibility Pure Water Club 6-Stage RO DI Systems
Filter Dimensions 10 inch standard cartridge size
Sediment Pre-Filter 5 micron polypropylene (1 pc)
Carbon Block Pre-Filters 5 micron coconut carbon block (2 pcs)
DI Filter Resin Load 6 oz pre-loaded ion exchange resin (1 pc)
Post-Filter In-line granular activated carbon (1 pc)
Replacement Cycle 6-12 months depending on water quality
INSTALLATION & USE

Filter Replacement Procedure

  1. Shut off feed water supply and relieve system pressure by opening the dispensing faucet until water stops flowing
  2. Remove filter housings using a housing wrench and discard old cartridges, then clean housings with mild soap and rinse thoroughly
  3. Install new filters in correct order: sediment first, followed by both carbon blocks, then DI filter, and finally the inline GAC post-filter
  4. Hand-tighten housings with lubricated o-rings, turn on water supply slowly, and check all connections for leaks
  5. Flush system for 5-10 minutes before use to remove carbon fines and activate the DI resin bed
COMPATIBILITY

System Requirements

This FS-5B filter set is manufactured by IPW Industries Inc as a compatible replacement for Pure Water Club branded 6-stage reverse osmosis deionization systems. All cartridges use standard 10 inch housing dimensions with 2.5 inch outer diameter. The DI filter requires a system designed to accommodate resin-based polishing cartridges. Not compatible with systems using proprietary quick-connect housings or non-standard filter lengths. Verify your existing system uses 10 inch cartridge housings before ordering.

🔧 Pro Tip: Replace your DI resin filter more frequently than other stages if you're chasing 0 TDS water for reef tanks or laboratory use. The resin exhausts faster than carbon or sediment filters, and a spent DI stage will let dissolved solids pass through even when other filters still look clean.
This complete 5-piece filter replacement set is engineered for 6-stage RO DI systems and delivers Pure Water Club compatibility with IPW Industries quality standards. Each filter is precisely sized at 10 inches and includes sediment pre-filtration, dual carbon block stages, DI resin polishing, and GAC post-filtration for laboratory-grade water purity.
SPECIFICATIONS

Complete Filter Set Details

Model Number FS-5B
Compatibility Pure Water Club 6-Stage RO DI Systems
Filter Dimensions 10 inch standard cartridge size
Sediment Pre-Filter 5 micron polypropylene (1 pc)
Carbon Block Pre-Filters 5 micron coconut carbon block (2 pcs)
DI Filter Resin Load 6 oz pre-loaded ion exchange resin (1 pc)
Post-Filter In-line granular activated carbon (1 pc)
Replacement Cycle 6-12 months depending on water quality
INSTALLATION & USE

Filter Replacement Procedure

  1. Shut off feed water supply and relieve system pressure by opening the dispensing faucet until water stops flowing
  2. Remove filter housings using a housing wrench and discard old cartridges, then clean housings with mild soap and rinse thoroughly
  3. Install new filters in correct order: sediment first, followed by both carbon blocks, then DI filter, and finally the inline GAC post-filter
  4. Hand-tighten housings with lubricated o-rings, turn on water supply slowly, and check all connections for leaks
  5. Flush system for 5-10 minutes before use to remove carbon fines and activate the DI resin bed
COMPATIBILITY

System Requirements

This FS-5B filter set is manufactured by IPW Industries Inc as a compatible replacement for Pure Water Club branded 6-stage reverse osmosis deionization systems. All cartridges use standard 10 inch housing dimensions with 2.5 inch outer diameter. The DI filter requires a system designed to accommodate resin-based polishing cartridges. Not compatible with systems using proprietary quick-connect housings or non-standard filter lengths. Verify your existing system uses 10 inch cartridge housings before ordering.

🔧 Pro Tip: Replace your DI resin filter more frequently than other stages if you're chasing 0 TDS water for reef tanks or laboratory use. The resin exhausts faster than carbon or sediment filters, and a spent DI stage will let dissolved solids pass through even when other filters still look clean.
$26.25

Original: $74.99

-65%
IPW Industries Inc Compatible to Pure Water Club 1 Set 5 Pcs Spare Replacement RO DI Filters #Fs-5b—

$74.99

$26.25

Description

This complete 5-piece filter replacement set is engineered for 6-stage RO DI systems and delivers Pure Water Club compatibility with IPW Industries quality standards. Each filter is precisely sized at 10 inches and includes sediment pre-filtration, dual carbon block stages, DI resin polishing, and GAC post-filtration for laboratory-grade water purity.
SPECIFICATIONS

Complete Filter Set Details

Model Number FS-5B
Compatibility Pure Water Club 6-Stage RO DI Systems
Filter Dimensions 10 inch standard cartridge size
Sediment Pre-Filter 5 micron polypropylene (1 pc)
Carbon Block Pre-Filters 5 micron coconut carbon block (2 pcs)
DI Filter Resin Load 6 oz pre-loaded ion exchange resin (1 pc)
Post-Filter In-line granular activated carbon (1 pc)
Replacement Cycle 6-12 months depending on water quality
INSTALLATION & USE

Filter Replacement Procedure

  1. Shut off feed water supply and relieve system pressure by opening the dispensing faucet until water stops flowing
  2. Remove filter housings using a housing wrench and discard old cartridges, then clean housings with mild soap and rinse thoroughly
  3. Install new filters in correct order: sediment first, followed by both carbon blocks, then DI filter, and finally the inline GAC post-filter
  4. Hand-tighten housings with lubricated o-rings, turn on water supply slowly, and check all connections for leaks
  5. Flush system for 5-10 minutes before use to remove carbon fines and activate the DI resin bed
COMPATIBILITY

System Requirements

This FS-5B filter set is manufactured by IPW Industries Inc as a compatible replacement for Pure Water Club branded 6-stage reverse osmosis deionization systems. All cartridges use standard 10 inch housing dimensions with 2.5 inch outer diameter. The DI filter requires a system designed to accommodate resin-based polishing cartridges. Not compatible with systems using proprietary quick-connect housings or non-standard filter lengths. Verify your existing system uses 10 inch cartridge housings before ordering.

🔧 Pro Tip: Replace your DI resin filter more frequently than other stages if you're chasing 0 TDS water for reef tanks or laboratory use. The resin exhausts faster than carbon or sediment filters, and a spent DI stage will let dissolved solids pass through even when other filters still look clean.