IPW Industries Inc. Compatible Upgraded Replacement Filters For HydroLogic Stealth RO150 / RO300 Systems; 2) 22060 and 2) 22125
Complete Annual Filter Kit Details
| Compatibility | HydroLogic Stealth RO150 and RO300 systems |
| Kit Contents | 2x IPW 22060 sediment filters, 2x IPW 22125 KDF85/carbon filters |
| Sediment Filter (22060) | 5 micron pleated design, removes silt, rust, dirt, sand, and sediment |
| Carbon Filter (22125) | KDF85/catalytic carbon blend, removes iron, sulfur, chlorine, heavy metals |
| Flow Rate | Rated at 1 GPM per filter |
| Filter Lifespan | 6 to 12 months depending on water quality and usage |
| Membrane | Not included (RO membrane sold separately) |
| Ideal Application | Well water, municipal water, high sediment or iron content sources |
Filter Replacement Procedure
- Shut off water supply and relieve system pressure by opening the product water valve. Remove old filter housings and discard used filters.
- Install the 22060 pleated sediment filters in the first and third stages of your HydroLogic Stealth system. Clean the housing o-rings and apply a thin layer of food-grade silicone lubricant before reassembly.
- Install the 22125 KDF85/catalytic carbon filters in the second and fourth stages. Hand-tighten housings securely without over-torquing.
- Turn water supply back on slowly and inspect all connections for leaks. Flush the system for 5 minutes before resuming normal operation.
- Mark your calendar for the next replacement in 6 to 12 months based on your water source quality and daily usage volume.
System Compatibility
This IPW Industries filter kit is engineered as a direct-fit replacement for HydroLogic Stealth RO150 and RO300 reverse osmosis systems. The 22060 sediment filters replace the original HydroLogic sediment cartridges, while the 22125 KDF85/catalytic carbon filters are an upgraded alternative to the green coconut carbon filters originally supplied with these systems. The KDF85 media provides bacteriostatic protection that prevents microbial growth inside the filter, making this kit particularly well-suited for well water applications with iron, sulfur, or heavy metal concerns. Both filter types use standard housing sizes compatible with the Stealth system architecture. Note that the RO membrane is not included in this annual maintenance kit and should be replaced separately every 2 to 3 years depending on feed water quality.
Complete Annual Filter Kit Details
| Compatibility | HydroLogic Stealth RO150 and RO300 systems |
| Kit Contents | 2x IPW 22060 sediment filters, 2x IPW 22125 KDF85/carbon filters |
| Sediment Filter (22060) | 5 micron pleated design, removes silt, rust, dirt, sand, and sediment |
| Carbon Filter (22125) | KDF85/catalytic carbon blend, removes iron, sulfur, chlorine, heavy metals |
| Flow Rate | Rated at 1 GPM per filter |
| Filter Lifespan | 6 to 12 months depending on water quality and usage |
| Membrane | Not included (RO membrane sold separately) |
| Ideal Application | Well water, municipal water, high sediment or iron content sources |
Filter Replacement Procedure
- Shut off water supply and relieve system pressure by opening the product water valve. Remove old filter housings and discard used filters.
- Install the 22060 pleated sediment filters in the first and third stages of your HydroLogic Stealth system. Clean the housing o-rings and apply a thin layer of food-grade silicone lubricant before reassembly.
- Install the 22125 KDF85/catalytic carbon filters in the second and fourth stages. Hand-tighten housings securely without over-torquing.
- Turn water supply back on slowly and inspect all connections for leaks. Flush the system for 5 minutes before resuming normal operation.
- Mark your calendar for the next replacement in 6 to 12 months based on your water source quality and daily usage volume.
System Compatibility
This IPW Industries filter kit is engineered as a direct-fit replacement for HydroLogic Stealth RO150 and RO300 reverse osmosis systems. The 22060 sediment filters replace the original HydroLogic sediment cartridges, while the 22125 KDF85/catalytic carbon filters are an upgraded alternative to the green coconut carbon filters originally supplied with these systems. The KDF85 media provides bacteriostatic protection that prevents microbial growth inside the filter, making this kit particularly well-suited for well water applications with iron, sulfur, or heavy metal concerns. Both filter types use standard housing sizes compatible with the Stealth system architecture. Note that the RO membrane is not included in this annual maintenance kit and should be replaced separately every 2 to 3 years depending on feed water quality.
Original: $75.00
-65%$75.00
$26.25Description
Complete Annual Filter Kit Details
| Compatibility | HydroLogic Stealth RO150 and RO300 systems |
| Kit Contents | 2x IPW 22060 sediment filters, 2x IPW 22125 KDF85/carbon filters |
| Sediment Filter (22060) | 5 micron pleated design, removes silt, rust, dirt, sand, and sediment |
| Carbon Filter (22125) | KDF85/catalytic carbon blend, removes iron, sulfur, chlorine, heavy metals |
| Flow Rate | Rated at 1 GPM per filter |
| Filter Lifespan | 6 to 12 months depending on water quality and usage |
| Membrane | Not included (RO membrane sold separately) |
| Ideal Application | Well water, municipal water, high sediment or iron content sources |
Filter Replacement Procedure
- Shut off water supply and relieve system pressure by opening the product water valve. Remove old filter housings and discard used filters.
- Install the 22060 pleated sediment filters in the first and third stages of your HydroLogic Stealth system. Clean the housing o-rings and apply a thin layer of food-grade silicone lubricant before reassembly.
- Install the 22125 KDF85/catalytic carbon filters in the second and fourth stages. Hand-tighten housings securely without over-torquing.
- Turn water supply back on slowly and inspect all connections for leaks. Flush the system for 5 minutes before resuming normal operation.
- Mark your calendar for the next replacement in 6 to 12 months based on your water source quality and daily usage volume.
System Compatibility
This IPW Industries filter kit is engineered as a direct-fit replacement for HydroLogic Stealth RO150 and RO300 reverse osmosis systems. The 22060 sediment filters replace the original HydroLogic sediment cartridges, while the 22125 KDF85/catalytic carbon filters are an upgraded alternative to the green coconut carbon filters originally supplied with these systems. The KDF85 media provides bacteriostatic protection that prevents microbial growth inside the filter, making this kit particularly well-suited for well water applications with iron, sulfur, or heavy metal concerns. Both filter types use standard housing sizes compatible with the Stealth system architecture. Note that the RO membrane is not included in this annual maintenance kit and should be replaced separately every 2 to 3 years depending on feed water quality.
