
Omnipure - ELF 1M-SILVER - 12.5" x 4" ELF-Series 1 Micron Carbon Block Filter; Silver Impregnated
Omnipure ELF 1M-SILVER Technical Details
| Model Number | ELF 1M-SILVER |
| Dimensions | 12.5" length x 4" diameter |
| Filter Type | Carbon block with silver impregnation |
| Micron Rating | 1 micron (nominal) |
| Primary Filtration | Chlorine, taste, odor, cyst reduction |
| Special Feature | Silver-impregnated media for microorganism inhibition |
| Series | Omnipure E-Series ELF |
| Application | RO systems, specialty filtration, point-of-use |
Filter Replacement Procedure
- Shut off water supply and relieve system pressure by opening the dispensing faucet
- Remove the filter housing, discard the old filter, and clean the housing interior with mild soap and water
- Install the Omnipure ELF 1M-SILVER into the housing, ensuring proper seating and o-ring alignment
- Reassemble the housing, turn on water supply, and flush the new filter for 3-5 minutes before use
System Compatibility
The ELF 1M-SILVER is designed for proprietary Omnipure housings that accommodate 12.5" x 4" diameter cartridges. This filter is commonly used in reverse osmosis systems as a pre-filter or post-filter stage, under-sink drinking water systems, and commercial applications requiring both particulate removal and bacteriostatic protection. Verify your housing dimensions before ordering, as the 4-inch diameter is larger than standard 10" x 2.5" or 2.75" cartridges.
Omnipure ELF 1M-SILVER Technical Details
| Model Number | ELF 1M-SILVER |
| Dimensions | 12.5" length x 4" diameter |
| Filter Type | Carbon block with silver impregnation |
| Micron Rating | 1 micron (nominal) |
| Primary Filtration | Chlorine, taste, odor, cyst reduction |
| Special Feature | Silver-impregnated media for microorganism inhibition |
| Series | Omnipure E-Series ELF |
| Application | RO systems, specialty filtration, point-of-use |
Filter Replacement Procedure
- Shut off water supply and relieve system pressure by opening the dispensing faucet
- Remove the filter housing, discard the old filter, and clean the housing interior with mild soap and water
- Install the Omnipure ELF 1M-SILVER into the housing, ensuring proper seating and o-ring alignment
- Reassemble the housing, turn on water supply, and flush the new filter for 3-5 minutes before use
System Compatibility
The ELF 1M-SILVER is designed for proprietary Omnipure housings that accommodate 12.5" x 4" diameter cartridges. This filter is commonly used in reverse osmosis systems as a pre-filter or post-filter stage, under-sink drinking water systems, and commercial applications requiring both particulate removal and bacteriostatic protection. Verify your housing dimensions before ordering, as the 4-inch diameter is larger than standard 10" x 2.5" or 2.75" cartridges.
Original: $48.30
-65%$48.30
$16.90Description
Omnipure ELF 1M-SILVER Technical Details
| Model Number | ELF 1M-SILVER |
| Dimensions | 12.5" length x 4" diameter |
| Filter Type | Carbon block with silver impregnation |
| Micron Rating | 1 micron (nominal) |
| Primary Filtration | Chlorine, taste, odor, cyst reduction |
| Special Feature | Silver-impregnated media for microorganism inhibition |
| Series | Omnipure E-Series ELF |
| Application | RO systems, specialty filtration, point-of-use |
Filter Replacement Procedure
- Shut off water supply and relieve system pressure by opening the dispensing faucet
- Remove the filter housing, discard the old filter, and clean the housing interior with mild soap and water
- Install the Omnipure ELF 1M-SILVER into the housing, ensuring proper seating and o-ring alignment
- Reassemble the housing, turn on water supply, and flush the new filter for 3-5 minutes before use
System Compatibility
The ELF 1M-SILVER is designed for proprietary Omnipure housings that accommodate 12.5" x 4" diameter cartridges. This filter is commonly used in reverse osmosis systems as a pre-filter or post-filter stage, under-sink drinking water systems, and commercial applications requiring both particulate removal and bacteriostatic protection. Verify your housing dimensions before ordering, as the 4-inch diameter is larger than standard 10" x 2.5" or 2.75" cartridges.
























