IPW Industries Inc-10" x 2.5 Sediment Filter Cartridge 1 Micron
Technical Details
| Dimensions | 10" x 2.5" |
| Micron Rating | 1 Micron |
| Filter Type | Meltblown Polypropylene |
| Material | 100% Pure Polypropylene |
| Applications | Whole House, RO Pre-Filtration |
| Removes | Sediment, Dirt, Sand, Silt, Rust |
| Replacement Cycle | 4–6 Months |
| Manufacturer | IPW Industries Inc |
Filter Replacement Procedure
- Shut off water supply and relieve system pressure by opening faucet or pressing pressure release button on housing.
- Unscrew filter housing using appropriate wrench, remove spent cartridge, and clean housing interior with mild soap solution.
- Insert new IPW Industries 10" x 2.5" sediment cartridge, ensuring proper seating at base of housing.
- Reinstall housing with lubricated o-ring, hand-tighten, then turn on water supply and check for leaks.
- Flush system for 3–5 minutes to remove any fine particles before resuming normal use.
System Compatibility
This 10" x 2.5" sediment filter cartridge is a direct replacement for 9534-40 EC110, EV953440, SpectraPure Micro-Tec, and Kenmore Deluxe Sediment 38480 cartridges. The standard 10-inch length and 2.5-inch diameter fit most residential whole-house filter housings and reverse osmosis pre-filter stages. Manufactured by IPW Industries Inc, a Water Quality Association member with over 17 years of water filtration expertise, ensuring consistent quality and performance across replacement cycles.
Technical Details
| Dimensions | 10" x 2.5" |
| Micron Rating | 1 Micron |
| Filter Type | Meltblown Polypropylene |
| Material | 100% Pure Polypropylene |
| Applications | Whole House, RO Pre-Filtration |
| Removes | Sediment, Dirt, Sand, Silt, Rust |
| Replacement Cycle | 4–6 Months |
| Manufacturer | IPW Industries Inc |
Filter Replacement Procedure
- Shut off water supply and relieve system pressure by opening faucet or pressing pressure release button on housing.
- Unscrew filter housing using appropriate wrench, remove spent cartridge, and clean housing interior with mild soap solution.
- Insert new IPW Industries 10" x 2.5" sediment cartridge, ensuring proper seating at base of housing.
- Reinstall housing with lubricated o-ring, hand-tighten, then turn on water supply and check for leaks.
- Flush system for 3–5 minutes to remove any fine particles before resuming normal use.
System Compatibility
This 10" x 2.5" sediment filter cartridge is a direct replacement for 9534-40 EC110, EV953440, SpectraPure Micro-Tec, and Kenmore Deluxe Sediment 38480 cartridges. The standard 10-inch length and 2.5-inch diameter fit most residential whole-house filter housings and reverse osmosis pre-filter stages. Manufactured by IPW Industries Inc, a Water Quality Association member with over 17 years of water filtration expertise, ensuring consistent quality and performance across replacement cycles.
Description
Technical Details
| Dimensions | 10" x 2.5" |
| Micron Rating | 1 Micron |
| Filter Type | Meltblown Polypropylene |
| Material | 100% Pure Polypropylene |
| Applications | Whole House, RO Pre-Filtration |
| Removes | Sediment, Dirt, Sand, Silt, Rust |
| Replacement Cycle | 4–6 Months |
| Manufacturer | IPW Industries Inc |
Filter Replacement Procedure
- Shut off water supply and relieve system pressure by opening faucet or pressing pressure release button on housing.
- Unscrew filter housing using appropriate wrench, remove spent cartridge, and clean housing interior with mild soap solution.
- Insert new IPW Industries 10" x 2.5" sediment cartridge, ensuring proper seating at base of housing.
- Reinstall housing with lubricated o-ring, hand-tighten, then turn on water supply and check for leaks.
- Flush system for 3–5 minutes to remove any fine particles before resuming normal use.
System Compatibility
This 10" x 2.5" sediment filter cartridge is a direct replacement for 9534-40 EC110, EV953440, SpectraPure Micro-Tec, and Kenmore Deluxe Sediment 38480 cartridges. The standard 10-inch length and 2.5-inch diameter fit most residential whole-house filter housings and reverse osmosis pre-filter stages. Manufactured by IPW Industries Inc, a Water Quality Association member with over 17 years of water filtration expertise, ensuring consistent quality and performance across replacement cycles.
