Pentek - Standard 10" Filter Housing with 3/4" NPT - Black Cap / Blue Sump
10" Filter Housing with 3/4" NPT Ports
Built for durability and reliable sealing across demanding applications
Top-Seated Buna-N O-Ring
Leak-proof sealing design keeps the housing secure under pressure, preventing bypass and ensuring contaminants stay trapped inside the cartridge.
Reinforced Polypropylene Construction
Thick-walled housing and cap resist cracking and chemical degradation, standing up to a wide range of water chemistry and operating conditions.
Pressure Relief Button
Built-in bleed button on the inlet side releases trapped air and pressure, making cartridge changes safer and preventing housing damage during maintenance.
Transparent Blue Sump
Clear polypropylene body allows on-site visual inspection of filter cartridge condition and flow without disassembly, reducing unnecessary maintenance.
Standard 3/4" NPT Ports
Industry-standard threading on inlet and outlet ensures compatibility with most plumbing configurations and simplifies installation on existing systems.
Materials and operating limits
| Housing Material | Polypropylene (Blue) |
| Cap Material | Reinforced Polypropylene (Black) |
| O-Ring | Buna-N |
| Button Assembly | 300-Series Stainless Steel, Polypropylene, EPDM |
| Port Size | 3/4" NPT (Inlet & Outlet) |
| Cartridge Size | 10" x 2.5" (Standard) |
| Maximum Pressure | 125 PSI (8.62 bar) |
| Maximum Temperature | 125°F (51.7°C) |
Accepts all standard 10-inch filter cartridges
This Pentek 150067 filter housing fits any 10" x 2.5" diameter cartridge, including sediment filters, carbon blocks, pleated polyester, wound string, and specialty media. Compatible with Pentek, DGD, RFC, R-Series, P-Series, and most third-party cartridges designed for standard 10-inch housings. The 3/4" NPT threading works with standard pipe fittings, John Guest push-connect adapters, and most residential or commercial plumbing systems.
Filter cartridge replacement schedule
Sediment Pre-Filters
Replace sediment cartridges based on pressure drop or visible loading. High sediment loads may require more frequent changes.
Carbon Block Filters
Carbon filters lose adsorption capacity over time. Replace based on water quality, taste, or odor changes even if flow remains strong.
O-Ring Inspection
Check the Buna-N o-ring for wear, cracking, or deformation during each cartridge change. Replace if seal shows any damage or leaking occurs.
Housing Cleaning
Rinse the sump with clean water during cartridge changes. For heavy biofilm or mineral buildup, soak in a mild bleach or citric acid solution.
Multi-Application Design
Suitable for whole-house filtration, under-sink systems, well water treatment, and light commercial applications
Chemical Resistant
Polypropylene construction resists chlorine, acids, and most common water treatment chemicals without degradation
Easy Cartridge Access
Hand-tighten design with wrench flats allows quick filter changes without specialized tools or plumbing experience
Universal Cartridge Fit
Standard 10" x 2.5" sizing accepts cartridges from all major manufacturers for maximum flexibility and sourcing options
10" Filter Housing with 3/4" NPT Ports
Built for durability and reliable sealing across demanding applications
Top-Seated Buna-N O-Ring
Leak-proof sealing design keeps the housing secure under pressure, preventing bypass and ensuring contaminants stay trapped inside the cartridge.
Reinforced Polypropylene Construction
Thick-walled housing and cap resist cracking and chemical degradation, standing up to a wide range of water chemistry and operating conditions.
Pressure Relief Button
Built-in bleed button on the inlet side releases trapped air and pressure, making cartridge changes safer and preventing housing damage during maintenance.
Transparent Blue Sump
Clear polypropylene body allows on-site visual inspection of filter cartridge condition and flow without disassembly, reducing unnecessary maintenance.
Standard 3/4" NPT Ports
Industry-standard threading on inlet and outlet ensures compatibility with most plumbing configurations and simplifies installation on existing systems.
Materials and operating limits
| Housing Material | Polypropylene (Blue) |
| Cap Material | Reinforced Polypropylene (Black) |
| O-Ring | Buna-N |
| Button Assembly | 300-Series Stainless Steel, Polypropylene, EPDM |
| Port Size | 3/4" NPT (Inlet & Outlet) |
| Cartridge Size | 10" x 2.5" (Standard) |
| Maximum Pressure | 125 PSI (8.62 bar) |
| Maximum Temperature | 125°F (51.7°C) |
Accepts all standard 10-inch filter cartridges
This Pentek 150067 filter housing fits any 10" x 2.5" diameter cartridge, including sediment filters, carbon blocks, pleated polyester, wound string, and specialty media. Compatible with Pentek, DGD, RFC, R-Series, P-Series, and most third-party cartridges designed for standard 10-inch housings. The 3/4" NPT threading works with standard pipe fittings, John Guest push-connect adapters, and most residential or commercial plumbing systems.
Filter cartridge replacement schedule
Sediment Pre-Filters
Replace sediment cartridges based on pressure drop or visible loading. High sediment loads may require more frequent changes.
Carbon Block Filters
Carbon filters lose adsorption capacity over time. Replace based on water quality, taste, or odor changes even if flow remains strong.
O-Ring Inspection
Check the Buna-N o-ring for wear, cracking, or deformation during each cartridge change. Replace if seal shows any damage or leaking occurs.
Housing Cleaning
Rinse the sump with clean water during cartridge changes. For heavy biofilm or mineral buildup, soak in a mild bleach or citric acid solution.
Multi-Application Design
Suitable for whole-house filtration, under-sink systems, well water treatment, and light commercial applications
Chemical Resistant
Polypropylene construction resists chlorine, acids, and most common water treatment chemicals without degradation
Easy Cartridge Access
Hand-tighten design with wrench flats allows quick filter changes without specialized tools or plumbing experience
Universal Cartridge Fit
Standard 10" x 2.5" sizing accepts cartridges from all major manufacturers for maximum flexibility and sourcing options
Original: $53.57
-65%$53.57
$18.75Description
10" Filter Housing with 3/4" NPT Ports
Built for durability and reliable sealing across demanding applications
Top-Seated Buna-N O-Ring
Leak-proof sealing design keeps the housing secure under pressure, preventing bypass and ensuring contaminants stay trapped inside the cartridge.
Reinforced Polypropylene Construction
Thick-walled housing and cap resist cracking and chemical degradation, standing up to a wide range of water chemistry and operating conditions.
Pressure Relief Button
Built-in bleed button on the inlet side releases trapped air and pressure, making cartridge changes safer and preventing housing damage during maintenance.
Transparent Blue Sump
Clear polypropylene body allows on-site visual inspection of filter cartridge condition and flow without disassembly, reducing unnecessary maintenance.
Standard 3/4" NPT Ports
Industry-standard threading on inlet and outlet ensures compatibility with most plumbing configurations and simplifies installation on existing systems.
Materials and operating limits
| Housing Material | Polypropylene (Blue) |
| Cap Material | Reinforced Polypropylene (Black) |
| O-Ring | Buna-N |
| Button Assembly | 300-Series Stainless Steel, Polypropylene, EPDM |
| Port Size | 3/4" NPT (Inlet & Outlet) |
| Cartridge Size | 10" x 2.5" (Standard) |
| Maximum Pressure | 125 PSI (8.62 bar) |
| Maximum Temperature | 125°F (51.7°C) |
Accepts all standard 10-inch filter cartridges
This Pentek 150067 filter housing fits any 10" x 2.5" diameter cartridge, including sediment filters, carbon blocks, pleated polyester, wound string, and specialty media. Compatible with Pentek, DGD, RFC, R-Series, P-Series, and most third-party cartridges designed for standard 10-inch housings. The 3/4" NPT threading works with standard pipe fittings, John Guest push-connect adapters, and most residential or commercial plumbing systems.
Filter cartridge replacement schedule
Sediment Pre-Filters
Replace sediment cartridges based on pressure drop or visible loading. High sediment loads may require more frequent changes.
Carbon Block Filters
Carbon filters lose adsorption capacity over time. Replace based on water quality, taste, or odor changes even if flow remains strong.
O-Ring Inspection
Check the Buna-N o-ring for wear, cracking, or deformation during each cartridge change. Replace if seal shows any damage or leaking occurs.
Housing Cleaning
Rinse the sump with clean water during cartridge changes. For heavy biofilm or mineral buildup, soak in a mild bleach or citric acid solution.
Multi-Application Design
Suitable for whole-house filtration, under-sink systems, well water treatment, and light commercial applications
Chemical Resistant
Polypropylene construction resists chlorine, acids, and most common water treatment chemicals without degradation
Easy Cartridge Access
Hand-tighten design with wrench flats allows quick filter changes without specialized tools or plumbing experience
Universal Cartridge Fit
Standard 10" x 2.5" sizing accepts cartridges from all major manufacturers for maximum flexibility and sourcing options
