Viqua (QL-200) Replacement Lamp and Quartz Sleeve Combo Kit
The Viqua QL-200 Combo Kit pairs the high-output S200RL-HO ultraviolet lamp with a QS-001 quartz sleeve, delivering everything you need to restore your VH200 Series UV system to peak performance. This factory-matched set ensures optimal UV transmission and eliminates the guesswork of sourcing compatible components separately.
SPECIFICATIONS
What's Included in the QL-200 Kit
| UV Lamp Model | S200RL-HO (High Output) |
| Quartz Sleeve Model | QS-001 |
| Compatible Systems | Viqua VH200 Series |
| Lamp Replacement Interval | 12 months / 9,000 hours |
| Quartz Sleeve Material | High-purity fused quartz |
| Kit Part Number | QL-200 |
| Manufacturer | Viqua (Trojan Technologies) |
INSTALLATION & USE
Replacing Your Lamp and Quartz Sleeve
- Disconnect power to your VH200 UV system and shut off water supply. Release pressure and unscrew the chamber from the reactor body.
- Remove the old lamp by disconnecting the power connector, then carefully slide out the old quartz sleeve using the included removal tool or gloved hands.
- Clean the interior of the chamber, slide in the new QS-001 quartz sleeve, and insert the S200RL-HO lamp into the sleeve until it seats properly.
- Reconnect the lamp connector, inspect the o-ring for damage, lubricate if needed, and thread the chamber back onto the reactor body hand-tight.
- Restore water flow slowly to check for leaks, then reconnect power and verify the system lamp indicator shows normal operation.
COMPATIBILITY
Works With These Viqua Systems
The QL-200 combo kit is designed exclusively for Viqua VH200 Series UV water disinfection systems. This includes the VH200-F20, VH200-F30, and other VH200 variants that use the S200RL-HO lamp and QS-001 quartz sleeve configuration. Always verify your system model before ordering to ensure proper fit and performance.
🔧 Pro Tip: Replace your quartz sleeve at least every third lamp change, or sooner if you notice mineral buildup or clouding. Even a clean-looking sleeve can lose UV transmission efficiency over time, reducing disinfection performance without visible warning signs.
The Viqua QL-200 Combo Kit pairs the high-output S200RL-HO ultraviolet lamp with a QS-001 quartz sleeve, delivering everything you need to restore your VH200 Series UV system to peak performance. This factory-matched set ensures optimal UV transmission and eliminates the guesswork of sourcing compatible components separately.
SPECIFICATIONS
What's Included in the QL-200 Kit
| UV Lamp Model | S200RL-HO (High Output) |
| Quartz Sleeve Model | QS-001 |
| Compatible Systems | Viqua VH200 Series |
| Lamp Replacement Interval | 12 months / 9,000 hours |
| Quartz Sleeve Material | High-purity fused quartz |
| Kit Part Number | QL-200 |
| Manufacturer | Viqua (Trojan Technologies) |
INSTALLATION & USE
Replacing Your Lamp and Quartz Sleeve
- Disconnect power to your VH200 UV system and shut off water supply. Release pressure and unscrew the chamber from the reactor body.
- Remove the old lamp by disconnecting the power connector, then carefully slide out the old quartz sleeve using the included removal tool or gloved hands.
- Clean the interior of the chamber, slide in the new QS-001 quartz sleeve, and insert the S200RL-HO lamp into the sleeve until it seats properly.
- Reconnect the lamp connector, inspect the o-ring for damage, lubricate if needed, and thread the chamber back onto the reactor body hand-tight.
- Restore water flow slowly to check for leaks, then reconnect power and verify the system lamp indicator shows normal operation.
COMPATIBILITY
Works With These Viqua Systems
The QL-200 combo kit is designed exclusively for Viqua VH200 Series UV water disinfection systems. This includes the VH200-F20, VH200-F30, and other VH200 variants that use the S200RL-HO lamp and QS-001 quartz sleeve configuration. Always verify your system model before ordering to ensure proper fit and performance.
🔧 Pro Tip: Replace your quartz sleeve at least every third lamp change, or sooner if you notice mineral buildup or clouding. Even a clean-looking sleeve can lose UV transmission efficiency over time, reducing disinfection performance without visible warning signs.
$78.75
Original: $225.00
-65%Viqua (QL-200) Replacement Lamp and Quartz Sleeve Combo Kit—
$225.00
$78.75Description
The Viqua QL-200 Combo Kit pairs the high-output S200RL-HO ultraviolet lamp with a QS-001 quartz sleeve, delivering everything you need to restore your VH200 Series UV system to peak performance. This factory-matched set ensures optimal UV transmission and eliminates the guesswork of sourcing compatible components separately.
SPECIFICATIONS
What's Included in the QL-200 Kit
| UV Lamp Model | S200RL-HO (High Output) |
| Quartz Sleeve Model | QS-001 |
| Compatible Systems | Viqua VH200 Series |
| Lamp Replacement Interval | 12 months / 9,000 hours |
| Quartz Sleeve Material | High-purity fused quartz |
| Kit Part Number | QL-200 |
| Manufacturer | Viqua (Trojan Technologies) |
INSTALLATION & USE
Replacing Your Lamp and Quartz Sleeve
- Disconnect power to your VH200 UV system and shut off water supply. Release pressure and unscrew the chamber from the reactor body.
- Remove the old lamp by disconnecting the power connector, then carefully slide out the old quartz sleeve using the included removal tool or gloved hands.
- Clean the interior of the chamber, slide in the new QS-001 quartz sleeve, and insert the S200RL-HO lamp into the sleeve until it seats properly.
- Reconnect the lamp connector, inspect the o-ring for damage, lubricate if needed, and thread the chamber back onto the reactor body hand-tight.
- Restore water flow slowly to check for leaks, then reconnect power and verify the system lamp indicator shows normal operation.
COMPATIBILITY
Works With These Viqua Systems
The QL-200 combo kit is designed exclusively for Viqua VH200 Series UV water disinfection systems. This includes the VH200-F20, VH200-F30, and other VH200 variants that use the S200RL-HO lamp and QS-001 quartz sleeve configuration. Always verify your system model before ordering to ensure proper fit and performance.
🔧 Pro Tip: Replace your quartz sleeve at least every third lamp change, or sooner if you notice mineral buildup or clouding. Even a clean-looking sleeve can lose UV transmission efficiency over time, reducing disinfection performance without visible warning signs.
