Watts-PG07L25 0-100 psi Pressure Gauge Liquid Filled Side Mount
Watts PG07L25 Technical Details
| Model Number | Watts PG07L25 |
| Pressure Range | 0-100 psi |
| Case Diameter | 2.5 inches |
| Connection Size | 1/4 inch NPT side mount |
| Body Material | 304 Stainless Steel |
| Internal Components | Brass internals and connection |
| Window Type | 372 Plastic |
| Fill Type | Glycerin liquid filled |
Mounting the Watts PG07L25 Gauge
- Apply thread sealant tape or paste to the 1/4 inch NPT threads, wrapping clockwise 3-4 times to ensure a leak-free connection.
- Thread the gauge into the side-mount port on your RO membrane housing, pre-filter housing, or pressure tank tee, tightening hand-tight first.
- Use a wrench on the hex flats to snug the connection, rotating the gauge body to position the dial face for optimal readability without over-torquing.
- Pressurize the system slowly and check for leaks at the connection point, adjusting as needed before bringing to full operating pressure.
Application Range
The Watts PG07L25 pressure gauge is compatible with residential and commercial reverse osmosis systems, whole house filtration setups, booster pumps, pressure tanks, and any water treatment application requiring pressure monitoring up to 100 psi. The 1/4 inch NPT connection is standard across most RO membrane housings, filter manifolds, and pressure vessels. The glycerin fill dampens needle vibration and protects internals from pulsation damage common in pump-fed systems.
Watts PG07L25 Technical Details
| Model Number | Watts PG07L25 |
| Pressure Range | 0-100 psi |
| Case Diameter | 2.5 inches |
| Connection Size | 1/4 inch NPT side mount |
| Body Material | 304 Stainless Steel |
| Internal Components | Brass internals and connection |
| Window Type | 372 Plastic |
| Fill Type | Glycerin liquid filled |
Mounting the Watts PG07L25 Gauge
- Apply thread sealant tape or paste to the 1/4 inch NPT threads, wrapping clockwise 3-4 times to ensure a leak-free connection.
- Thread the gauge into the side-mount port on your RO membrane housing, pre-filter housing, or pressure tank tee, tightening hand-tight first.
- Use a wrench on the hex flats to snug the connection, rotating the gauge body to position the dial face for optimal readability without over-torquing.
- Pressurize the system slowly and check for leaks at the connection point, adjusting as needed before bringing to full operating pressure.
Application Range
The Watts PG07L25 pressure gauge is compatible with residential and commercial reverse osmosis systems, whole house filtration setups, booster pumps, pressure tanks, and any water treatment application requiring pressure monitoring up to 100 psi. The 1/4 inch NPT connection is standard across most RO membrane housings, filter manifolds, and pressure vessels. The glycerin fill dampens needle vibration and protects internals from pulsation damage common in pump-fed systems.
Original: $48.72
-65%$48.72
$17.05Description
Watts PG07L25 Technical Details
| Model Number | Watts PG07L25 |
| Pressure Range | 0-100 psi |
| Case Diameter | 2.5 inches |
| Connection Size | 1/4 inch NPT side mount |
| Body Material | 304 Stainless Steel |
| Internal Components | Brass internals and connection |
| Window Type | 372 Plastic |
| Fill Type | Glycerin liquid filled |
Mounting the Watts PG07L25 Gauge
- Apply thread sealant tape or paste to the 1/4 inch NPT threads, wrapping clockwise 3-4 times to ensure a leak-free connection.
- Thread the gauge into the side-mount port on your RO membrane housing, pre-filter housing, or pressure tank tee, tightening hand-tight first.
- Use a wrench on the hex flats to snug the connection, rotating the gauge body to position the dial face for optimal readability without over-torquing.
- Pressurize the system slowly and check for leaks at the connection point, adjusting as needed before bringing to full operating pressure.
Application Range
The Watts PG07L25 pressure gauge is compatible with residential and commercial reverse osmosis systems, whole house filtration setups, booster pumps, pressure tanks, and any water treatment application requiring pressure monitoring up to 100 psi. The 1/4 inch NPT connection is standard across most RO membrane housings, filter manifolds, and pressure vessels. The glycerin fill dampens needle vibration and protects internals from pulsation damage common in pump-fed systems.
