Alamo (A8014-FL) Filter Ag 2 CF Bag
Alamo A8014-FL Technical Data
| Model Number | A8014-FL |
| Media Type | Filter Lite (granulated silicon dioxide) |
| Bag Volume | 2 cubic feet |
| Mesh Size | 10 x 34 (0.67 mm effective size) |
| Bulk Density | 24-26 lbs/cu. ft. |
| Service Flow Rate | 5 gpm/sq. ft. (higher rates often used) |
| Backwash Flow Rate | 8-10 gpm/sq. ft. |
| Maximum Temperature | 140°F (60°C) |
Setup and Operation Guidelines
- Load Filter Lite media into tank with a minimum bed depth of 24-36 inches and freeboard of at least 50% of bed depth to allow for backwash expansion.
- Allow the media bed to soak overnight before initial backwashing to eliminate air pockets and ensure proper settling.
- Backwash at 8-10 gpm per square foot until discharge runs clear, allowing 20-40% bed expansion during the cycle.
- Operate at service flow rates up to 5 gpm per square foot for standard sediment removal, adjusting based on water quality and suspended solids loading.
- Schedule regular backwash cycles based on pressure differential across the filter bed or water quality testing to maintain filtration efficiency.
System Requirements
The Alamo A8014-FL Filter Lite media is compatible with Clack and most standard sediment filter tanks equipped for backwash operation. Suitable for wide pH range applications and water temperatures up to 140°F. This 2 cubic foot bag provides sufficient media for tanks in the 10-inch to 13-inch diameter range with proper bed depth and freeboard. Works effectively as a standalone sediment filter or as pre-filtration ahead of softeners, carbon systems, and reverse osmosis units.
Alamo A8014-FL Technical Data
| Model Number | A8014-FL |
| Media Type | Filter Lite (granulated silicon dioxide) |
| Bag Volume | 2 cubic feet |
| Mesh Size | 10 x 34 (0.67 mm effective size) |
| Bulk Density | 24-26 lbs/cu. ft. |
| Service Flow Rate | 5 gpm/sq. ft. (higher rates often used) |
| Backwash Flow Rate | 8-10 gpm/sq. ft. |
| Maximum Temperature | 140°F (60°C) |
Setup and Operation Guidelines
- Load Filter Lite media into tank with a minimum bed depth of 24-36 inches and freeboard of at least 50% of bed depth to allow for backwash expansion.
- Allow the media bed to soak overnight before initial backwashing to eliminate air pockets and ensure proper settling.
- Backwash at 8-10 gpm per square foot until discharge runs clear, allowing 20-40% bed expansion during the cycle.
- Operate at service flow rates up to 5 gpm per square foot for standard sediment removal, adjusting based on water quality and suspended solids loading.
- Schedule regular backwash cycles based on pressure differential across the filter bed or water quality testing to maintain filtration efficiency.
System Requirements
The Alamo A8014-FL Filter Lite media is compatible with Clack and most standard sediment filter tanks equipped for backwash operation. Suitable for wide pH range applications and water temperatures up to 140°F. This 2 cubic foot bag provides sufficient media for tanks in the 10-inch to 13-inch diameter range with proper bed depth and freeboard. Works effectively as a standalone sediment filter or as pre-filtration ahead of softeners, carbon systems, and reverse osmosis units.
Original: $99.99
-65%$99.99
$35.00Description
Alamo A8014-FL Technical Data
| Model Number | A8014-FL |
| Media Type | Filter Lite (granulated silicon dioxide) |
| Bag Volume | 2 cubic feet |
| Mesh Size | 10 x 34 (0.67 mm effective size) |
| Bulk Density | 24-26 lbs/cu. ft. |
| Service Flow Rate | 5 gpm/sq. ft. (higher rates often used) |
| Backwash Flow Rate | 8-10 gpm/sq. ft. |
| Maximum Temperature | 140°F (60°C) |
Setup and Operation Guidelines
- Load Filter Lite media into tank with a minimum bed depth of 24-36 inches and freeboard of at least 50% of bed depth to allow for backwash expansion.
- Allow the media bed to soak overnight before initial backwashing to eliminate air pockets and ensure proper settling.
- Backwash at 8-10 gpm per square foot until discharge runs clear, allowing 20-40% bed expansion during the cycle.
- Operate at service flow rates up to 5 gpm per square foot for standard sediment removal, adjusting based on water quality and suspended solids loading.
- Schedule regular backwash cycles based on pressure differential across the filter bed or water quality testing to maintain filtration efficiency.
System Requirements
The Alamo A8014-FL Filter Lite media is compatible with Clack and most standard sediment filter tanks equipped for backwash operation. Suitable for wide pH range applications and water temperatures up to 140°F. This 2 cubic foot bag provides sufficient media for tanks in the 10-inch to 13-inch diameter range with proper bed depth and freeboard. Works effectively as a standalone sediment filter or as pre-filtration ahead of softeners, carbon systems, and reverse osmosis units.
