HomeStore

CSM RE2540-BLN - 2.5" x 40"; 1000 GPD - Low Energy - Brackish Water Replacement Reverse Osmosis Membrane

Product image 1

CSM RE2540-BLN - 2.5" x 40"; 1000 GPD - Low Energy - Brackish Water Replacement Reverse Osmosis Membrane

The CSM RE2540-BLN is a 1000 GPD low energy reverse osmosis membrane engineered by Toray for commercial brackish water treatment up to 10,000 ppm TDS. This 2.5" x 40" thin film composite membrane delivers consistent performance across drinking water, pharmaceutical, industrial process water, and wastewater applications.
SPECIFICATIONS

CSM RE2540-BLN Technical Details

Manufacturer Toray (CSM Brand)
Model Number RE2540-BLN
Dimensions 2.5" diameter x 40" length
Flow Rate 1000 gallons per day (GPD)
Membrane Type Thin Film Composite (TFM)
Application Brackish water, tap water (up to 10,000 ppm TDS)
Energy Profile Low energy consumption
Replacement Interval Every 24 months under normal conditions
INSTALLATION & USE

Installing the CSM RE2540-BLN Membrane

  1. Shut off feed water and depressurize the RO system completely before removing the membrane housing end cap.
  2. Remove the old membrane by pushing it out from the feed end, then flush the housing interior with clean water to remove any sediment buildup.
  3. Insert the new CSM RE2540-BLN membrane into the housing with the brine seal end facing the feed water side, ensuring proper orientation according to flow direction markings.
  4. Reinstall the end cap with a new o-ring if needed, then slowly pressurize the system and flush the membrane for 30-60 minutes before returning to service.
  5. Monitor permeate quality and system pressure for the first 24 hours to confirm proper seating and performance.
COMPATIBILITY

System Requirements

The CSM RE2540-BLN fits standard 2.5" x 40" commercial membrane housings and is compatible with most brackish water RO systems designed for 1000 GPD output. Suitable for municipal tap water, well water, and brackish groundwater sources with TDS levels up to 10,000 ppm. Pre-filtration with 5-micron sediment and carbon filters is required to protect the membrane from fouling and chlorine damage. Works in food and beverage processing, pharmaceutical production, industrial water treatment, and municipal drinking water systems.

🔧 Pro Tip: Record your system's baseline pressure and permeate flow rate immediately after installing the new RE2540-BLN membrane. A 10-15% decline in normalized permeate flow or a 15% increase in pressure differential signals it's time to clean or replace the membrane, even if you haven't reached the 24-month mark.
The CSM RE2540-BLN is a 1000 GPD low energy reverse osmosis membrane engineered by Toray for commercial brackish water treatment up to 10,000 ppm TDS. This 2.5" x 40" thin film composite membrane delivers consistent performance across drinking water, pharmaceutical, industrial process water, and wastewater applications.
SPECIFICATIONS

CSM RE2540-BLN Technical Details

Manufacturer Toray (CSM Brand)
Model Number RE2540-BLN
Dimensions 2.5" diameter x 40" length
Flow Rate 1000 gallons per day (GPD)
Membrane Type Thin Film Composite (TFM)
Application Brackish water, tap water (up to 10,000 ppm TDS)
Energy Profile Low energy consumption
Replacement Interval Every 24 months under normal conditions
INSTALLATION & USE

Installing the CSM RE2540-BLN Membrane

  1. Shut off feed water and depressurize the RO system completely before removing the membrane housing end cap.
  2. Remove the old membrane by pushing it out from the feed end, then flush the housing interior with clean water to remove any sediment buildup.
  3. Insert the new CSM RE2540-BLN membrane into the housing with the brine seal end facing the feed water side, ensuring proper orientation according to flow direction markings.
  4. Reinstall the end cap with a new o-ring if needed, then slowly pressurize the system and flush the membrane for 30-60 minutes before returning to service.
  5. Monitor permeate quality and system pressure for the first 24 hours to confirm proper seating and performance.
COMPATIBILITY

System Requirements

The CSM RE2540-BLN fits standard 2.5" x 40" commercial membrane housings and is compatible with most brackish water RO systems designed for 1000 GPD output. Suitable for municipal tap water, well water, and brackish groundwater sources with TDS levels up to 10,000 ppm. Pre-filtration with 5-micron sediment and carbon filters is required to protect the membrane from fouling and chlorine damage. Works in food and beverage processing, pharmaceutical production, industrial water treatment, and municipal drinking water systems.

🔧 Pro Tip: Record your system's baseline pressure and permeate flow rate immediately after installing the new RE2540-BLN membrane. A 10-15% decline in normalized permeate flow or a 15% increase in pressure differential signals it's time to clean or replace the membrane, even if you haven't reached the 24-month mark.
$238.96
CSM RE2540-BLN - 2.5" x 40"; 1000 GPD - Low Energy - Brackish Water Replacement Reverse Osmosis Membrane—
$238.96

Description

The CSM RE2540-BLN is a 1000 GPD low energy reverse osmosis membrane engineered by Toray for commercial brackish water treatment up to 10,000 ppm TDS. This 2.5" x 40" thin film composite membrane delivers consistent performance across drinking water, pharmaceutical, industrial process water, and wastewater applications.
SPECIFICATIONS

CSM RE2540-BLN Technical Details

Manufacturer Toray (CSM Brand)
Model Number RE2540-BLN
Dimensions 2.5" diameter x 40" length
Flow Rate 1000 gallons per day (GPD)
Membrane Type Thin Film Composite (TFM)
Application Brackish water, tap water (up to 10,000 ppm TDS)
Energy Profile Low energy consumption
Replacement Interval Every 24 months under normal conditions
INSTALLATION & USE

Installing the CSM RE2540-BLN Membrane

  1. Shut off feed water and depressurize the RO system completely before removing the membrane housing end cap.
  2. Remove the old membrane by pushing it out from the feed end, then flush the housing interior with clean water to remove any sediment buildup.
  3. Insert the new CSM RE2540-BLN membrane into the housing with the brine seal end facing the feed water side, ensuring proper orientation according to flow direction markings.
  4. Reinstall the end cap with a new o-ring if needed, then slowly pressurize the system and flush the membrane for 30-60 minutes before returning to service.
  5. Monitor permeate quality and system pressure for the first 24 hours to confirm proper seating and performance.
COMPATIBILITY

System Requirements

The CSM RE2540-BLN fits standard 2.5" x 40" commercial membrane housings and is compatible with most brackish water RO systems designed for 1000 GPD output. Suitable for municipal tap water, well water, and brackish groundwater sources with TDS levels up to 10,000 ppm. Pre-filtration with 5-micron sediment and carbon filters is required to protect the membrane from fouling and chlorine damage. Works in food and beverage processing, pharmaceutical production, industrial water treatment, and municipal drinking water systems.

🔧 Pro Tip: Record your system's baseline pressure and permeate flow rate immediately after installing the new RE2540-BLN membrane. A 10-15% decline in normalized permeate flow or a 15% increase in pressure differential signals it's time to clean or replace the membrane, even if you haven't reached the 24-month mark.
CSM RE2540-BLN - 2.5" x 40"; 1000 GPD - Low Energy - Brackish Water Replacement Reverse Osmosis Membrane | Isopure Water