EcoWater Compatible (ET213-16) 16 GPD TFC Reverse Osmosis Membrane
The EcoWater ET213-16 is a 16 GPD thin-film composite reverse osmosis membrane engineered for the EcoWater ERO-392 system and compatible cross-brand platforms. This residential RO membrane delivers consistent permeate flow at standard household water pressure, removing dissolved solids and contaminants from your drinking water supply.
SPECIFICATIONS
ET213-16 Membrane Technical Details
| Manufacturer | EcoWater Systems |
| Model Number | ET213-16 |
| Type | Thin-Film Composite (TFC) RO Membrane |
| Daily Production Rate | 16 gallons per day (GPD) @ 65 PSI |
| Application | Residential reverse osmosis systems |
| Primary System | EcoWater ERO-392 |
| Replacement Interval | 24-36 months (depends on water quality) |
| Operating Pressure | Optimized for 65 PSI feed water |
INSTALLATION & USE
How to Replace Your RO Membrane
- Shut off the feed water supply to your reverse osmosis system and open the faucet to relieve system pressure
- Unscrew the membrane housing cap (typically hand-tight), remove the old ET213-16 membrane, and discard
- Insert the new EcoWater membrane into the housing with the input end facing the feed water direction, ensuring O-rings are properly seated
- Reinstall the housing cap, turn the water supply back on, and flush the system for 2-3 fill cycles before use
COMPATIBILITY
Cross-Brand Fitment
The EcoWater ET213-16 membrane is designed for the EcoWater ERO-392 reverse osmosis system but also fits compatible units from Sears, Northstar, and General Electric Water that use the same membrane housing configuration. Always verify your existing membrane model number and housing dimensions before ordering to ensure proper fitment and performance in your specific system.
🔧 Pro Tip: Mark your calendar when you install a new membrane. TFC membranes can last 2-3 years, but performance degrades gradually. If you notice slower flow or higher TDS readings on your output water, it's time to replace even if you haven't hit the time interval yet.
The EcoWater ET213-16 is a 16 GPD thin-film composite reverse osmosis membrane engineered for the EcoWater ERO-392 system and compatible cross-brand platforms. This residential RO membrane delivers consistent permeate flow at standard household water pressure, removing dissolved solids and contaminants from your drinking water supply.
SPECIFICATIONS
ET213-16 Membrane Technical Details
| Manufacturer | EcoWater Systems |
| Model Number | ET213-16 |
| Type | Thin-Film Composite (TFC) RO Membrane |
| Daily Production Rate | 16 gallons per day (GPD) @ 65 PSI |
| Application | Residential reverse osmosis systems |
| Primary System | EcoWater ERO-392 |
| Replacement Interval | 24-36 months (depends on water quality) |
| Operating Pressure | Optimized for 65 PSI feed water |
INSTALLATION & USE
How to Replace Your RO Membrane
- Shut off the feed water supply to your reverse osmosis system and open the faucet to relieve system pressure
- Unscrew the membrane housing cap (typically hand-tight), remove the old ET213-16 membrane, and discard
- Insert the new EcoWater membrane into the housing with the input end facing the feed water direction, ensuring O-rings are properly seated
- Reinstall the housing cap, turn the water supply back on, and flush the system for 2-3 fill cycles before use
COMPATIBILITY
Cross-Brand Fitment
The EcoWater ET213-16 membrane is designed for the EcoWater ERO-392 reverse osmosis system but also fits compatible units from Sears, Northstar, and General Electric Water that use the same membrane housing configuration. Always verify your existing membrane model number and housing dimensions before ordering to ensure proper fitment and performance in your specific system.
🔧 Pro Tip: Mark your calendar when you install a new membrane. TFC membranes can last 2-3 years, but performance degrades gradually. If you notice slower flow or higher TDS readings on your output water, it's time to replace even if you haven't hit the time interval yet.
$52.65
EcoWater Compatible (ET213-16) 16 GPD TFC Reverse Osmosis Membrane—
$52.65
Description
The EcoWater ET213-16 is a 16 GPD thin-film composite reverse osmosis membrane engineered for the EcoWater ERO-392 system and compatible cross-brand platforms. This residential RO membrane delivers consistent permeate flow at standard household water pressure, removing dissolved solids and contaminants from your drinking water supply.
SPECIFICATIONS
ET213-16 Membrane Technical Details
| Manufacturer | EcoWater Systems |
| Model Number | ET213-16 |
| Type | Thin-Film Composite (TFC) RO Membrane |
| Daily Production Rate | 16 gallons per day (GPD) @ 65 PSI |
| Application | Residential reverse osmosis systems |
| Primary System | EcoWater ERO-392 |
| Replacement Interval | 24-36 months (depends on water quality) |
| Operating Pressure | Optimized for 65 PSI feed water |
INSTALLATION & USE
How to Replace Your RO Membrane
- Shut off the feed water supply to your reverse osmosis system and open the faucet to relieve system pressure
- Unscrew the membrane housing cap (typically hand-tight), remove the old ET213-16 membrane, and discard
- Insert the new EcoWater membrane into the housing with the input end facing the feed water direction, ensuring O-rings are properly seated
- Reinstall the housing cap, turn the water supply back on, and flush the system for 2-3 fill cycles before use
COMPATIBILITY
Cross-Brand Fitment
The EcoWater ET213-16 membrane is designed for the EcoWater ERO-392 reverse osmosis system but also fits compatible units from Sears, Northstar, and General Electric Water that use the same membrane housing configuration. Always verify your existing membrane model number and housing dimensions before ordering to ensure proper fitment and performance in your specific system.
🔧 Pro Tip: Mark your calendar when you install a new membrane. TFC membranes can last 2-3 years, but performance degrades gradually. If you notice slower flow or higher TDS readings on your output water, it's time to replace even if you haven't hit the time interval yet.
