Hydronix - SWC - 40" x 2.5" String Wound Sediment Filter
40" x 2.5" String Wound Sediment Filter (SWC Series)
True depth filtration with high dirt-holding capacity for demanding industrial and whole-house applications. Polypropylene construction handles acids, alkalis, and extreme chemical environments up to 120°F.
Built for Heavy-Duty Sediment Removal
True Depth Filtration
Continuous high-speed wind process creates progressive density layers that capture sediment throughout the entire filter depth, not just the surface.
Extreme Chemical Resistance
Polypropylene construction withstands mineral acids, caustic soda, organic solvents, oxidizing agents, and corrosive fluids without degradation.
Low Media Migration
One-piece wound cartridge design prevents fiber shedding and media contamination in downstream equipment or processes.
Industrial Temperature Range
Handles process temperatures up to 120°F across mineral acids, plating solutions, ferric hydroxide, and industrial water streams.
Wide Application Spectrum
Pre-membrane protection, potable water, demineralized water, photographic solutions, petroleum oils, and chemical processing lines.
Hydronix SWC Series Technical Details
| Model | Hydronix SWC-40-2.5 |
| Dimensions | 40" x 2.5" |
| Filter Media | Polypropylene String Wound |
| Weight | 40 oz |
| Max Temperature | 120°F (49°C) |
| Construction | One-piece continuous wind |
| Filtration Type | True depth, gradient density |
Works With Standard 40" Housings
The Hydronix SWC 40" x 2.5" string wound filter fits all standard 40-inch sediment filter housings with 2.5" outer diameter capacity. Ideal for commercial whole-house systems, industrial pre-filtration stages, and chemical process lines requiring sediment removal before membranes, pumps, or sensitive equipment. Available in multiple micron ratings to match your specific sediment load and particle size requirements.
Replacement Schedule by Application
High-Sediment Industrial
Heavy sediment loads, plating solutions, mineral processing, or pre-membrane protection in industrial settings with elevated particle counts.
Standard Whole-House
Typical residential or light commercial whole-house applications with moderate sediment, well water, or municipal supply pre-filtration.
Low-Sediment Commercial
Clean municipal feeds, polishing stages, or light-duty pre-filtration where sediment levels are minimal and flow rates are consistent.
Pressure Drop Indicator
Replace when differential pressure across the filter reaches 15-20 PSI, regardless of time elapsed. Install a gauge to track loading.
Drop-In Replacement
Standard 40" x 2.5" dimensions fit existing housings without modification or adapters
Incinerable to Ash
Polypropylene burns cleanly with minimal residue for simplified disposal in regulated environments
Microbial Resistant
Polypropylene media resists bacterial growth and bio-fouling in water treatment applications
Multiple Micron Options
Available in wide range of filtration ratings to match specific sediment particle sizes
40" x 2.5" String Wound Sediment Filter (SWC Series)
True depth filtration with high dirt-holding capacity for demanding industrial and whole-house applications. Polypropylene construction handles acids, alkalis, and extreme chemical environments up to 120°F.
Built for Heavy-Duty Sediment Removal
True Depth Filtration
Continuous high-speed wind process creates progressive density layers that capture sediment throughout the entire filter depth, not just the surface.
Extreme Chemical Resistance
Polypropylene construction withstands mineral acids, caustic soda, organic solvents, oxidizing agents, and corrosive fluids without degradation.
Low Media Migration
One-piece wound cartridge design prevents fiber shedding and media contamination in downstream equipment or processes.
Industrial Temperature Range
Handles process temperatures up to 120°F across mineral acids, plating solutions, ferric hydroxide, and industrial water streams.
Wide Application Spectrum
Pre-membrane protection, potable water, demineralized water, photographic solutions, petroleum oils, and chemical processing lines.
Hydronix SWC Series Technical Details
| Model | Hydronix SWC-40-2.5 |
| Dimensions | 40" x 2.5" |
| Filter Media | Polypropylene String Wound |
| Weight | 40 oz |
| Max Temperature | 120°F (49°C) |
| Construction | One-piece continuous wind |
| Filtration Type | True depth, gradient density |
Works With Standard 40" Housings
The Hydronix SWC 40" x 2.5" string wound filter fits all standard 40-inch sediment filter housings with 2.5" outer diameter capacity. Ideal for commercial whole-house systems, industrial pre-filtration stages, and chemical process lines requiring sediment removal before membranes, pumps, or sensitive equipment. Available in multiple micron ratings to match your specific sediment load and particle size requirements.
Replacement Schedule by Application
High-Sediment Industrial
Heavy sediment loads, plating solutions, mineral processing, or pre-membrane protection in industrial settings with elevated particle counts.
Standard Whole-House
Typical residential or light commercial whole-house applications with moderate sediment, well water, or municipal supply pre-filtration.
Low-Sediment Commercial
Clean municipal feeds, polishing stages, or light-duty pre-filtration where sediment levels are minimal and flow rates are consistent.
Pressure Drop Indicator
Replace when differential pressure across the filter reaches 15-20 PSI, regardless of time elapsed. Install a gauge to track loading.
Drop-In Replacement
Standard 40" x 2.5" dimensions fit existing housings without modification or adapters
Incinerable to Ash
Polypropylene burns cleanly with minimal residue for simplified disposal in regulated environments
Microbial Resistant
Polypropylene media resists bacterial growth and bio-fouling in water treatment applications
Multiple Micron Options
Available in wide range of filtration ratings to match specific sediment particle sizes
Description
40" x 2.5" String Wound Sediment Filter (SWC Series)
True depth filtration with high dirt-holding capacity for demanding industrial and whole-house applications. Polypropylene construction handles acids, alkalis, and extreme chemical environments up to 120°F.
Built for Heavy-Duty Sediment Removal
True Depth Filtration
Continuous high-speed wind process creates progressive density layers that capture sediment throughout the entire filter depth, not just the surface.
Extreme Chemical Resistance
Polypropylene construction withstands mineral acids, caustic soda, organic solvents, oxidizing agents, and corrosive fluids without degradation.
Low Media Migration
One-piece wound cartridge design prevents fiber shedding and media contamination in downstream equipment or processes.
Industrial Temperature Range
Handles process temperatures up to 120°F across mineral acids, plating solutions, ferric hydroxide, and industrial water streams.
Wide Application Spectrum
Pre-membrane protection, potable water, demineralized water, photographic solutions, petroleum oils, and chemical processing lines.
Hydronix SWC Series Technical Details
| Model | Hydronix SWC-40-2.5 |
| Dimensions | 40" x 2.5" |
| Filter Media | Polypropylene String Wound |
| Weight | 40 oz |
| Max Temperature | 120°F (49°C) |
| Construction | One-piece continuous wind |
| Filtration Type | True depth, gradient density |
Works With Standard 40" Housings
The Hydronix SWC 40" x 2.5" string wound filter fits all standard 40-inch sediment filter housings with 2.5" outer diameter capacity. Ideal for commercial whole-house systems, industrial pre-filtration stages, and chemical process lines requiring sediment removal before membranes, pumps, or sensitive equipment. Available in multiple micron ratings to match your specific sediment load and particle size requirements.
Replacement Schedule by Application
High-Sediment Industrial
Heavy sediment loads, plating solutions, mineral processing, or pre-membrane protection in industrial settings with elevated particle counts.
Standard Whole-House
Typical residential or light commercial whole-house applications with moderate sediment, well water, or municipal supply pre-filtration.
Low-Sediment Commercial
Clean municipal feeds, polishing stages, or light-duty pre-filtration where sediment levels are minimal and flow rates are consistent.
Pressure Drop Indicator
Replace when differential pressure across the filter reaches 15-20 PSI, regardless of time elapsed. Install a gauge to track loading.
Drop-In Replacement
Standard 40" x 2.5" dimensions fit existing housings without modification or adapters
Incinerable to Ash
Polypropylene burns cleanly with minimal residue for simplified disposal in regulated environments
Microbial Resistant
Polypropylene media resists bacterial growth and bio-fouling in water treatment applications
Multiple Micron Options
Available in wide range of filtration ratings to match specific sediment particle sizes
