John Guest - Acetal Two-Way Divider Fitting - Grey
John Guest Acetal Two-Way Divider Technical Details
| Brand | John Guest Speedfit |
| Material | Acetal Copolymer |
| Seal Type | Food Grade Nitrile O-Ring |
| Connection Method | Push-to-Connect Collet (Grip & Seal) |
| Color | Grey |
| Compatible Models | PI2308S, PM2308S, PI2312S, PI2316S, PI241210S |
| Applications | Potable Water, Food/Beverage, Air, CO2, Pneumatics, Vacuum |
| Function | Splits Single Line into Two Equal Flow Paths |
How to Install John Guest Two-Way Divider Fittings
- Cut tubing square and ensure the outside diameter is clean and free of debris or burrs.
- Push the tubing fully into the fitting until it bottoms out against the internal tube stop. You should feel resistance as the collet grips the tube.
- For threaded female connections (taps, toilets), hand-tighten the nut onto the male thread after tube insertion.
- To disconnect, push the collet ring toward the fitting body while pulling the tubing straight out.
- Test both outlet lines to confirm equal flow distribution before finalizing installation.
Suitable Systems & Applications
John Guest acetal divider fittings are compatible with polyethylene, nylon, polyurethane, and soft copper tubing in sizes corresponding to model numbers (check your specific model for tube OD). Ideal for residential reverse osmosis systems, commercial beverage equipment, ice makers, refrigerator water lines, pneumatic control systems, and CO2 gas distribution. The food-grade nitrile O-ring seals meet NSF/ANSI standards for potable water contact. Not recommended for aromatic hydrocarbons, chlorinated solvents, or continuous hot water applications above manufacturer specifications.
John Guest Acetal Two-Way Divider Technical Details
| Brand | John Guest Speedfit |
| Material | Acetal Copolymer |
| Seal Type | Food Grade Nitrile O-Ring |
| Connection Method | Push-to-Connect Collet (Grip & Seal) |
| Color | Grey |
| Compatible Models | PI2308S, PM2308S, PI2312S, PI2316S, PI241210S |
| Applications | Potable Water, Food/Beverage, Air, CO2, Pneumatics, Vacuum |
| Function | Splits Single Line into Two Equal Flow Paths |
How to Install John Guest Two-Way Divider Fittings
- Cut tubing square and ensure the outside diameter is clean and free of debris or burrs.
- Push the tubing fully into the fitting until it bottoms out against the internal tube stop. You should feel resistance as the collet grips the tube.
- For threaded female connections (taps, toilets), hand-tighten the nut onto the male thread after tube insertion.
- To disconnect, push the collet ring toward the fitting body while pulling the tubing straight out.
- Test both outlet lines to confirm equal flow distribution before finalizing installation.
Suitable Systems & Applications
John Guest acetal divider fittings are compatible with polyethylene, nylon, polyurethane, and soft copper tubing in sizes corresponding to model numbers (check your specific model for tube OD). Ideal for residential reverse osmosis systems, commercial beverage equipment, ice makers, refrigerator water lines, pneumatic control systems, and CO2 gas distribution. The food-grade nitrile O-ring seals meet NSF/ANSI standards for potable water contact. Not recommended for aromatic hydrocarbons, chlorinated solvents, or continuous hot water applications above manufacturer specifications.
Original: $4.48
-65%$4.48
$1.57Description
John Guest Acetal Two-Way Divider Technical Details
| Brand | John Guest Speedfit |
| Material | Acetal Copolymer |
| Seal Type | Food Grade Nitrile O-Ring |
| Connection Method | Push-to-Connect Collet (Grip & Seal) |
| Color | Grey |
| Compatible Models | PI2308S, PM2308S, PI2312S, PI2316S, PI241210S |
| Applications | Potable Water, Food/Beverage, Air, CO2, Pneumatics, Vacuum |
| Function | Splits Single Line into Two Equal Flow Paths |
How to Install John Guest Two-Way Divider Fittings
- Cut tubing square and ensure the outside diameter is clean and free of debris or burrs.
- Push the tubing fully into the fitting until it bottoms out against the internal tube stop. You should feel resistance as the collet grips the tube.
- For threaded female connections (taps, toilets), hand-tighten the nut onto the male thread after tube insertion.
- To disconnect, push the collet ring toward the fitting body while pulling the tubing straight out.
- Test both outlet lines to confirm equal flow distribution before finalizing installation.
Suitable Systems & Applications
John Guest acetal divider fittings are compatible with polyethylene, nylon, polyurethane, and soft copper tubing in sizes corresponding to model numbers (check your specific model for tube OD). Ideal for residential reverse osmosis systems, commercial beverage equipment, ice makers, refrigerator water lines, pneumatic control systems, and CO2 gas distribution. The food-grade nitrile O-ring seals meet NSF/ANSI standards for potable water contact. Not recommended for aromatic hydrocarbons, chlorinated solvents, or continuous hot water applications above manufacturer specifications.
