HomeStore

John Guest Speedfit PEI222020 1-2-Inch Stem by 1-2-Inch Pipe Plug-In Elbow

Product image 1

John Guest Speedfit PEI222020 1-2-Inch Stem by 1-2-Inch Pipe Plug-In Elbow

The John Guest Speedfit PEI222020 delivers a secure, tool-free connection for 1/2-inch tubing in water filtration and RO systems. This push-to-connect elbow fitting features a 90-degree stem design that redirects flow in tight spaces without compression nuts or thread sealant.
SPECIFICATIONS

John Guest PEI222020 Technical Details

Model Number PEI222020
Connection Type Push-to-connect elbow
Stem Size 1/2-inch
Tube Size 1/2-inch
Angle 90-degree
Material Engineering-grade polymer
Max Pressure 150 PSI at 73°F
Application RO systems, water filtration
INSTALLATION & USE

How to Install the PEI222020 Elbow Fitting

  1. Cut tubing squarely with a proper tube cutter and ensure the end is free of debris or burrs
  2. Push the tubing firmly into the fitting until it bottoms out against the internal stop
  3. Gently tug the tube to confirm it is fully locked into the collet grip
  4. To remove, push the collet ring toward the fitting body while pulling the tube straight out
COMPATIBILITY

Works With John Guest and Universal 1/2-Inch Tubing

The PEI222020 is compatible with all John Guest 1/2-inch OD tubing and most universal 1/2-inch tubing used in residential and light commercial water filtration systems. This fitting works with reverse osmosis systems, inline filters, icemakers, and refrigerator water lines that require a 90-degree directional change at the 1/2-inch connection point.

🔧 Pro tip: Mark the insertion depth on your tubing with a felt pen before pushing it in. This lets you visually confirm full seating without relying on feel alone, especially in cramped under-sink installations where you cannot see the connection point clearly.
The John Guest Speedfit PEI222020 delivers a secure, tool-free connection for 1/2-inch tubing in water filtration and RO systems. This push-to-connect elbow fitting features a 90-degree stem design that redirects flow in tight spaces without compression nuts or thread sealant.
SPECIFICATIONS

John Guest PEI222020 Technical Details

Model Number PEI222020
Connection Type Push-to-connect elbow
Stem Size 1/2-inch
Tube Size 1/2-inch
Angle 90-degree
Material Engineering-grade polymer
Max Pressure 150 PSI at 73°F
Application RO systems, water filtration
INSTALLATION & USE

How to Install the PEI222020 Elbow Fitting

  1. Cut tubing squarely with a proper tube cutter and ensure the end is free of debris or burrs
  2. Push the tubing firmly into the fitting until it bottoms out against the internal stop
  3. Gently tug the tube to confirm it is fully locked into the collet grip
  4. To remove, push the collet ring toward the fitting body while pulling the tube straight out
COMPATIBILITY

Works With John Guest and Universal 1/2-Inch Tubing

The PEI222020 is compatible with all John Guest 1/2-inch OD tubing and most universal 1/2-inch tubing used in residential and light commercial water filtration systems. This fitting works with reverse osmosis systems, inline filters, icemakers, and refrigerator water lines that require a 90-degree directional change at the 1/2-inch connection point.

🔧 Pro tip: Mark the insertion depth on your tubing with a felt pen before pushing it in. This lets you visually confirm full seating without relying on feel alone, especially in cramped under-sink installations where you cannot see the connection point clearly.
$4.39

Original: $12.55

-65%
John Guest Speedfit PEI222020 1-2-Inch Stem by 1-2-Inch Pipe Plug-In Elbow—

$12.55

$4.39

Description

The John Guest Speedfit PEI222020 delivers a secure, tool-free connection for 1/2-inch tubing in water filtration and RO systems. This push-to-connect elbow fitting features a 90-degree stem design that redirects flow in tight spaces without compression nuts or thread sealant.
SPECIFICATIONS

John Guest PEI222020 Technical Details

Model Number PEI222020
Connection Type Push-to-connect elbow
Stem Size 1/2-inch
Tube Size 1/2-inch
Angle 90-degree
Material Engineering-grade polymer
Max Pressure 150 PSI at 73°F
Application RO systems, water filtration
INSTALLATION & USE

How to Install the PEI222020 Elbow Fitting

  1. Cut tubing squarely with a proper tube cutter and ensure the end is free of debris or burrs
  2. Push the tubing firmly into the fitting until it bottoms out against the internal stop
  3. Gently tug the tube to confirm it is fully locked into the collet grip
  4. To remove, push the collet ring toward the fitting body while pulling the tube straight out
COMPATIBILITY

Works With John Guest and Universal 1/2-Inch Tubing

The PEI222020 is compatible with all John Guest 1/2-inch OD tubing and most universal 1/2-inch tubing used in residential and light commercial water filtration systems. This fitting works with reverse osmosis systems, inline filters, icemakers, and refrigerator water lines that require a 90-degree directional change at the 1/2-inch connection point.

🔧 Pro tip: Mark the insertion depth on your tubing with a felt pen before pushing it in. This lets you visually confirm full seating without relying on feel alone, especially in cramped under-sink installations where you cannot see the connection point clearly.
John Guest Speedfit PEI222020 1-2-Inch Stem by 1-2-Inch Pipe Plug-In Elbow | Isopure Water