Omnipure - CL10ROT40 - 10" x 2" T40 GAC Acid Washed Coconut Carbon Inline Filter
Omnipure CL10ROT40 Technical Details
| Model Number | CL10ROT40 (also CL10ROT40-B, CL10ROT40-C) |
| Dimensions | 10" L x 2" W inline cartridge |
| Media Type | Acid-washed coconut shell granular activated carbon (T40) |
| Connection Size | Available in 1/8”, 1/4” or 3/8” Female NPT |
| Flow Rate | 0.5 GPM |
| Filter Life | 1 year (usage dependent) |
| Max Pressure / Temp | 125 PSIG / 100°F |
| Primary Reduction | Chlorine taste and odor |
Installing the CL10ROT40 Inline Filter
- Shut off water supply and relieve system pressure before installation.
- Thread the filter inline using 3/8" NPT connections, ensuring flow direction matches any directional arrows on the housing.
- Hand-tighten connections securely, then use a wrench if necessary to prevent leaks (avoid overtightening).
- Flush the filter for 3-5 minutes to purge loose carbon fines and activate the media.
- Check all connections for leaks, then return system to normal operation.
System Compatibility
The Omnipure CL10ROT40 is compatible with most reverse osmosis systems, under-sink drinking water filters, ice machines, water coolers, and drinking fountains that accept 10" x 2" inline filters with NPT threaded connections. This filter uses T40 density coconut shell GAC, but Omnipure CL10RO housings also accept T28 and T33 carbon densities for flexibility in filtration performance. Verify your existing filter's thread size before ordering; example 3/8” NPT measures approximately 0.675" on a ruler, not 0.375".
Omnipure CL10ROT40 Technical Details
| Model Number | CL10ROT40 (also CL10ROT40-B, CL10ROT40-C) |
| Dimensions | 10" L x 2" W inline cartridge |
| Media Type | Acid-washed coconut shell granular activated carbon (T40) |
| Connection Size | Available in 1/8”, 1/4” or 3/8” Female NPT |
| Flow Rate | 0.5 GPM |
| Filter Life | 1 year (usage dependent) |
| Max Pressure / Temp | 125 PSIG / 100°F |
| Primary Reduction | Chlorine taste and odor |
Installing the CL10ROT40 Inline Filter
- Shut off water supply and relieve system pressure before installation.
- Thread the filter inline using 3/8" NPT connections, ensuring flow direction matches any directional arrows on the housing.
- Hand-tighten connections securely, then use a wrench if necessary to prevent leaks (avoid overtightening).
- Flush the filter for 3-5 minutes to purge loose carbon fines and activate the media.
- Check all connections for leaks, then return system to normal operation.
System Compatibility
The Omnipure CL10ROT40 is compatible with most reverse osmosis systems, under-sink drinking water filters, ice machines, water coolers, and drinking fountains that accept 10" x 2" inline filters with NPT threaded connections. This filter uses T40 density coconut shell GAC, but Omnipure CL10RO housings also accept T28 and T33 carbon densities for flexibility in filtration performance. Verify your existing filter's thread size before ordering; example 3/8” NPT measures approximately 0.675" on a ruler, not 0.375".
Original: $12.99
-65%$12.99
$4.55Description
Omnipure CL10ROT40 Technical Details
| Model Number | CL10ROT40 (also CL10ROT40-B, CL10ROT40-C) |
| Dimensions | 10" L x 2" W inline cartridge |
| Media Type | Acid-washed coconut shell granular activated carbon (T40) |
| Connection Size | Available in 1/8”, 1/4” or 3/8” Female NPT |
| Flow Rate | 0.5 GPM |
| Filter Life | 1 year (usage dependent) |
| Max Pressure / Temp | 125 PSIG / 100°F |
| Primary Reduction | Chlorine taste and odor |
Installing the CL10ROT40 Inline Filter
- Shut off water supply and relieve system pressure before installation.
- Thread the filter inline using 3/8" NPT connections, ensuring flow direction matches any directional arrows on the housing.
- Hand-tighten connections securely, then use a wrench if necessary to prevent leaks (avoid overtightening).
- Flush the filter for 3-5 minutes to purge loose carbon fines and activate the media.
- Check all connections for leaks, then return system to normal operation.
System Compatibility
The Omnipure CL10ROT40 is compatible with most reverse osmosis systems, under-sink drinking water filters, ice machines, water coolers, and drinking fountains that accept 10" x 2" inline filters with NPT threaded connections. This filter uses T40 density coconut shell GAC, but Omnipure CL10RO housings also accept T28 and T33 carbon densities for flexibility in filtration performance. Verify your existing filter's thread size before ordering; example 3/8” NPT measures approximately 0.675" on a ruler, not 0.375".
