Omnipure - K2533 - 10" x 2" T40 GAC Coconut Carbon Inline Filter
K2533 Coconut Shell GAC Inline Filter
10" x 2" granular activated carbon inline for chlorine, taste, and odor removal in RO systems, ice makers, and beverage equipment
The Omnipure K2533 uses loose coconut shell GAC to polish water after reverse osmosis or in standalone applications where chlorine taste and odor are the primary concern. Quick-connect fittings in 1/4" and 3/8" configurations make installation and annual replacement straightforward in tight spaces under counters or behind equipment.
K2533 Filter Performance
| Dimensions | 10" L × 2" W |
| Filtration Media | Coconut Shell Granular Activated Carbon |
| Primary Reduction | Chlorine taste and odor |
| Flow Rate | 0.5 GPM |
| Max Pressure | 125 PSIG |
| Max Temperature | 100°F |
| Fitting Options | 3/8" QC, 1/4" QC, 1/4" 90° FQC |
| Service Life | 1 year or as water quality dictates |
| NSF Standard | Tested to NSF 42 |
| Carbon Interchangeability | T28, T33, T40 models |
Where the K2533 Fits
This inline filter works as a post-RO carbon polishing stage, in standalone under-sink systems, or integrated into ice makers, refrigerators, beverage equipment, and drinking fountains. The K2533 is interchangeable with other Omnipure K-Series models using T28, T33, or T40 carbon designations, and cross-references with K2533-JJ, K2533-KK, K2533-SS, K2540-JJ, K2540-KK, and K2540-SS depending on fitting configuration. Quick-connect fittings are sized by thread diameter, not the nominal NPT label—always verify actual measurements before ordering if replacing non-Omnipure filters.
K2533 Coconut Shell GAC Inline Filter
10" x 2" granular activated carbon inline for chlorine, taste, and odor removal in RO systems, ice makers, and beverage equipment
The Omnipure K2533 uses loose coconut shell GAC to polish water after reverse osmosis or in standalone applications where chlorine taste and odor are the primary concern. Quick-connect fittings in 1/4" and 3/8" configurations make installation and annual replacement straightforward in tight spaces under counters or behind equipment.
K2533 Filter Performance
| Dimensions | 10" L × 2" W |
| Filtration Media | Coconut Shell Granular Activated Carbon |
| Primary Reduction | Chlorine taste and odor |
| Flow Rate | 0.5 GPM |
| Max Pressure | 125 PSIG |
| Max Temperature | 100°F |
| Fitting Options | 3/8" QC, 1/4" QC, 1/4" 90° FQC |
| Service Life | 1 year or as water quality dictates |
| NSF Standard | Tested to NSF 42 |
| Carbon Interchangeability | T28, T33, T40 models |
Where the K2533 Fits
This inline filter works as a post-RO carbon polishing stage, in standalone under-sink systems, or integrated into ice makers, refrigerators, beverage equipment, and drinking fountains. The K2533 is interchangeable with other Omnipure K-Series models using T28, T33, or T40 carbon designations, and cross-references with K2533-JJ, K2533-KK, K2533-SS, K2540-JJ, K2540-KK, and K2540-SS depending on fitting configuration. Quick-connect fittings are sized by thread diameter, not the nominal NPT label—always verify actual measurements before ordering if replacing non-Omnipure filters.
Original: $12.99
-65%$12.99
$4.55Description
K2533 Coconut Shell GAC Inline Filter
10" x 2" granular activated carbon inline for chlorine, taste, and odor removal in RO systems, ice makers, and beverage equipment
The Omnipure K2533 uses loose coconut shell GAC to polish water after reverse osmosis or in standalone applications where chlorine taste and odor are the primary concern. Quick-connect fittings in 1/4" and 3/8" configurations make installation and annual replacement straightforward in tight spaces under counters or behind equipment.
K2533 Filter Performance
| Dimensions | 10" L × 2" W |
| Filtration Media | Coconut Shell Granular Activated Carbon |
| Primary Reduction | Chlorine taste and odor |
| Flow Rate | 0.5 GPM |
| Max Pressure | 125 PSIG |
| Max Temperature | 100°F |
| Fitting Options | 3/8" QC, 1/4" QC, 1/4" 90° FQC |
| Service Life | 1 year or as water quality dictates |
| NSF Standard | Tested to NSF 42 |
| Carbon Interchangeability | T28, T33, T40 models |
Where the K2533 Fits
This inline filter works as a post-RO carbon polishing stage, in standalone under-sink systems, or integrated into ice makers, refrigerators, beverage equipment, and drinking fountains. The K2533 is interchangeable with other Omnipure K-Series models using T28, T33, or T40 carbon designations, and cross-references with K2533-JJ, K2533-KK, K2533-SS, K2540-JJ, K2540-KK, and K2540-SS depending on fitting configuration. Quick-connect fittings are sized by thread diameter, not the nominal NPT label—always verify actual measurements before ordering if replacing non-Omnipure filters.
